How to Change Out your DRL Daytime Running Light: 2008 Acura MDX

Рет қаралды 29,272

2 жыл бұрын

If Lori Can Do It, So Can You!
Step by Step Explanation on How to Change Out the Daytime Running Lamp to a 2008 Acura MDX.
*Make sure the autoparts place gives you the correct bulb.
The first time I went, they gave me the fog light bulb. The fog lights have a gray silver tip on the top of the bulb to make it not bright. Also the prongs inside the bulb that connects to the plug are close together. Whereas the DRL bulb is completely clear and the prongs are wider.
You Will Need:
1. The Daytime Running Light Bulb for your specific vehicle.
I bought mine from Auto Zone
2. Two Flathead Screw Drivers
Size 1/4 and 3/16
3. Yoga Mat
Steps:
1. Set up your workstation
Tip: Use a thick yoga mat
2. Remove the 3 Plastic Bolts from underneath the bumper.
Use smaller flathead screwdriver to pull the switch down and bigger flathead screwdriver to aid in removal of bolt
3. Remove Side screw using smaller flathead screwdriver
4. Open side to access lightbulbs.
5. Remove Daytime Running Light Connector
Tip: the Daytime Running light bulb will be the furthest from you
Tip: To remove, turn attachment LEFT or UPWARDS
6. Remove old light bulb
7. Replace with the new light bulb
The light bulb will only fit one way.
8. Return the DRL light to where you removed it from by turning the connector to the RIGHT OR DOWNWARDS to lock it in place
9. Check to make sure the bulb is working by turning the car on and to see if the DRL Alert is still on.
If there is no longer an alert and the light is on, YOU DID IT! Great Job!
10. Put everything back together.
I hope this inspires and empowers you to tackle your own projects!
*** Autozone also offered to put in my DRL lamp in for free after I purchased it. So, if you do not have time, see if they maybe able to do it for you! 🥰
Please support my channel by subscribing and clicking that like button. Also, leave a comment down below. I admit, I am no mechanic. I had to look up most of the information. I am sorry if I mislabeled the screw sizes or called the parts of the vehicle inaccurately. 😅

Пікірлер: 56

@raysalden4 Жыл бұрын

Now that's how you do a DIY Instructional video! Short, simple, and to the point with narrative text. Thank you, Ms. Can Do!

@loricando274 2 ай бұрын

Thank you for the encouragement!

@risingministries Жыл бұрын

Great job my dear! You don’t need to remove the plastic fasteners under bumper. You can just remove screw in tire well and under corner well. You can gain a little more space if you turn the wheel in as well. Also avoid placing fingers on bulbs, it can affect life of bulb an even cause it to shatter. Overall you did a great job!

@loricando274 Жыл бұрын

Thank you for the comment! Lol yes, you are correct on everything 😅 Glad for the great input!

@andykramer5368 Жыл бұрын

Thank you for this great tutorial. What really helped me was the camera angle where you showed the backside of the light socket because it was really hard for me to see and I wasn't sure if it was the kind you twist or pull out. This clarified it.

@loricando274 Жыл бұрын

I am so glad it helped you out.

@jeffreyleinen5264 6 ай бұрын

Lori next time turn the wheels to get easier access. Nice video!

@loricando274 6 ай бұрын

Thanks for the tip!

@seetow Жыл бұрын

Great job on the video. I really enjoyed the way you made the steps and highlights in the video. Make more of them. Thank you!

@loricando274 Жыл бұрын

Thank you for the comment! I will start working on some more. If there are any videos you want to see in the future, I am up for suggestions 🥰

@roncrafton3703 6 ай бұрын

Very good process. I would recommend that you turn the wheel to the left ( or right) depending on what side you are working on , but I found it much easier to remove the wheel and pull the plastic wheel well liner back to gain much more access. But again, I liked your video. It made a great start for me

@loricando274 6 ай бұрын

Thanks for the tips!

@mshawnmaire9044 2 жыл бұрын

Well, I have every to complete the task, except for a yoga mat.... Honestly, Lori, this is an excellent tutorial! some others would have you removing the whole front bumper...

@loricando274 2 жыл бұрын

Thank you! I really appreciate the feedback🥰

@theunfortunatespectacle7381 2 жыл бұрын

This is an excellent how to. Thank you! I was able to replace the DRL on my new 08 in 10 minutes. Used my new cargo mat. The fastener in the wheel well on mine has a Phillips head, and there is a 10mm bolt at the end of the bumper. But everything worked just the way you presented. Got all the plastic fasteners out without destroying them. I did the wrong side, for some reason. But the second time round took 5 minutes. One thing, though...using left and right is confusing, because that changes on each side of the car and whether you're in front or behind the bumper. Sorry to mansplain. For me the running lights are the inside lights, and I turn the bulb counterclockwise to remove and clockwise to install.

@loricando274 2 жыл бұрын

Thank you for the comment lol and mansplain away☺️ Definitely will consider that for future videos. Perhaps I should say right or left pertaining to the image in the video.

@wunderlichjon 2 жыл бұрын

Thanks for teaching me!!!!!

@djdamion1543 Жыл бұрын

Turn the wheel next time for more space. Nice work ❤

@annabobanna5073 Жыл бұрын

Thank you - you made it so simple to understand!

@loricando274 Жыл бұрын

Thank you for your comment. I am glad it helped👍☺️

@Raven1180 2 жыл бұрын

This is a great and well detailed how to vid.

@loricando274 2 жыл бұрын

Thank you for your kind comment💗

@Wyldfyre.84 Жыл бұрын

Thanks so much... This was a very helpful video!

@loricando274 Жыл бұрын

Thank you for your kind comment 🥰 I am glad

@uriva0707 7 ай бұрын

awsome!! , much appreciated.

@vsooner 2 жыл бұрын

I would recommend putting the new light bulb on with gloves so oils from your hands don’t get on the bulb

@loricando274 2 жыл бұрын

Thank you! Your recommendation is definitely appreciated. 🤩

@evergreenvalleyhomeimprove7269 7 ай бұрын

Yeah, it doesn't take much oil's from your skin or any other contaminants to greatly reduce the life of your bulb. It gets very hot under normal operating conditions, and oils or contaminants on the surface of the bulb will cause it to heat up more than the normal operating temperature since it will trap the heat and keep it from dissipating from the bulb. This is what reduces the life of your bulb. I used to wonder why my bulbs were burning out so fast when I was younger and worked on my own car. 😄

@federicosologuren7196 2 жыл бұрын

A big Thank you.

@loricando274 2 жыл бұрын

It is my pleasure😊

@awakenotwoke2643 Жыл бұрын

Damn,think I'm in love.

@loricando274 Жыл бұрын

Thank you for the compliment.

@charlesmadison1384 2 жыл бұрын

What if you had (started the engine and ) turned the front wheels all the way to the left ? Wouldn't that have given you a little more room to get your hand in there ?

@loricando274 2 жыл бұрын

Did that work for you? Thank you for the suggestion.

@ragaraga9399 2 жыл бұрын

Yes Charles.. That would give you more room for bigger hands..🇨🇦🇬🇾

@ae-bx2rj Жыл бұрын

You genius bastard. Thank you

@edgartapia1965 Жыл бұрын

I love girls that can do Cheers 💪💯

@loricando274 Жыл бұрын

Thank you🥰

@hanifever247 9 ай бұрын

Turn the wheel next time it way easier ❤

@loricando274 5 ай бұрын

Lol thank you! You are not the first one who told me this haha 😂 Definitely will do that and put rubber gloves on. Maybe skip a few extra steps that I did not need to do too.

@Czangrlli422 Жыл бұрын

You made it look so easy. Maybe turning the tire away would make for easier access

@loricando274 Жыл бұрын

❤Thank you for the great suggestion! Yes, I agree😅

@Czangrlli422 Жыл бұрын

I will be replacing mine this weekend, thanks for the video

@brianmcg321 2 жыл бұрын

Why did you remove the fasteners from the front when you accesses the light from the wheel well?

@loricando274 2 жыл бұрын

They were all attached together. I just found it easier for me to get to the light. I am not a professional and tried to make this easy for most people to do. If you know of a betterway. Please share 😍

@onamiilove777 2 жыл бұрын

👍🏽

@stephensweeny1124 Жыл бұрын

Can’t touch halon bulbs with fingers, the body oil on hands will shorten life.

@Emmanuel-tv6be Жыл бұрын

What happens if you replace the bulb and the alert of the dash is still there?

@loricando274 Жыл бұрын

That is a great question. Unfortunately, I do not have an answer, only a hypothesis. If the bulb is working, but the dash alert is still there, perhaps there is still a problem with the sensor that creates the dash alert? I would get a diagnostic.

@ragaraga9399 2 жыл бұрын

You grew hairy hands at 2:36 min 😆

@loricando274 2 жыл бұрын

Hahha yup 🤪😂🤣

@sintwo0one 11 ай бұрын

324 Productions inspired. Give her the credit please.

@imartynenko 8 ай бұрын

Next time please don’t touch the glass with your bare hands, it leaves oil from your fingers and bulb burns down prematurely. Otherwise I applaud your diy

@loricando274 7 ай бұрын

Thank you for the tip 🤩