How to change rear rotors and pads : Ford Mustang V 2005

How to change rear rotors and pads : Ford Mustang V 2005 - 2013

Рет қаралды 34,299

7 жыл бұрын

In this step by step video you will see how to change the rear brakes on a Mustang GT 4.6 V8.
I'll show you :
- How to unmount the caliper and it's bracket
-How to change the pads
- How to change the rotors
- How to push back the piston

Пікірлер: 37

@terryrideout7457 5 ай бұрын

Great job thank u.Love the color of caliber.

@fab-b9818 5 ай бұрын

Thanks ! My pleasure 😉.

@RayXhuu 4 жыл бұрын

My dude just the video I needed to see

@terryrideout7457 3 ай бұрын

Thank u .good job.appreciate it

@joseclimaco2483 5 жыл бұрын

Hey man really appreciate the help with the video.. good stuff

@fab-b9818 5 жыл бұрын

Hi Jose, glad you appreciate, thanks 😉 !

@Niqua10023 2 ай бұрын

I'm trying to learn to fix my own car. I have a 2010 V6 Mustang 🐎 and it's been giving me a hard time lately. I got it from a crappy dealership I wish I didn't. I do love my car and would do what I can to fix it. Without going to the shop or if I have too. I Have others too. That helps me a lot. I want to learn how to do this too and save money. I'm having a leak issue right now and I can smell it. Even though I replaced the water pump.

@chakaramaster 3 жыл бұрын

Thank you

@bladexeon 5 жыл бұрын

These are great videos thank you

@fab-b9818 5 жыл бұрын

Thanks, my pleasure 😁 !

@jeffforbes8743 4 жыл бұрын

Who sands the break pads first lol

@winkawak 2 жыл бұрын

if one of the dual piston is slightly leas compressed than the other one maybe by like 5mm will it make even contact once i pump my brakes during normal use?

@vincentfauconnier1460 2 жыл бұрын

merci

@thisguy9569 6 жыл бұрын

I was struggling so hard with those pistons, they were extremely tough it took me and a friend like 20mins each side

@fab-b9818 6 жыл бұрын

So did I until I figured you have to turn them as well as push in ^^ !

@thisguy9569 6 жыл бұрын

FAB-B I put a good amount of pressure on it and it still wouldn't turn well, was just a pain

@marcelcovaci9922 3 жыл бұрын

I wonder if you can put a breaker bar with a socket on instead of hitting the wrench?! Or use a deadblow not a hammer( if you have nice wrenches)

@fab-b9818 3 жыл бұрын

Yes you can, my wrench is a cheap one I use only for this, and he's still alive 😄.

@gurutimes2 2 жыл бұрын

just use the correct tool so you dont damage the piston or boot !

@mr.bosstang8363 3 жыл бұрын

You said rotors and pads🤔 I saw caliper and pads😑

@MendiYeti 4 жыл бұрын

You can really just spray paint the calipers?

@leorodriguez8679 4 жыл бұрын

Highly recommend heat resistant paint such as engine enamel paint or caliper paint. Anything high heat will work!

@Evillt1 5 жыл бұрын

clamp and pliers!!!!! omg dont do this people!!!!! tool is cheap go buy one for god sake

@fab-b9818 5 жыл бұрын

If you don't have the right tools but have to do the job you have to find a way...

@dennispetersen511 4 жыл бұрын

I just bought a tool on Amazon for $20. Well worth it!

@markcarter2613 4 жыл бұрын

Should have just hit the "key" with his purse!

@E_Legal_Alien 3 жыл бұрын

South African?

@fab-b9818 2 жыл бұрын

French 😄

@darkvalic97 5 жыл бұрын

The wrench is not called a key

@fab-b9818 5 жыл бұрын

I have trouble with technical terms, my native language and main channel are in french...

@robertswift6101 3 жыл бұрын

bleed the brakes,,,the fluid is dirty looking

@VGMStudios33 Жыл бұрын

Your embedding advice is terrible. You need to embed them properly. Also didn't see you tourque the bolts to the right amount. Also very important.

@fab-b9818 Жыл бұрын

For every day road use, it will do just fine. Never had problems bedding in my breaks this way... You're right about tightening to the right tork, but most people aren't equiped, and with that as well I've never had issues.