Teh CornerThief nice suggestion lol

I didn't get or like asmr until this video. This is my exception.

Daniel Korn thanks. I’m glad you like it and hopefully it can be of help.

It's a sign

You’re welcome thanks for your comment.

Comacho Comacho unless the blade is really poor quality then it’s the problem of the rubber. Blades are made with uniformity on either sides, but it is rare to have the same rubber on both sides.

I think you have to buy a new one. Once the sponge separates from the rubber, then it's hard to fix.

賴明德 Stiga 145

Philippe Masia Hi. I just glued directly I wish I had something to put on before gluing.

Walter Bijeli Hi. It doesn’t matter which color you glue for forehand or backhand. It’s personal preference.

I used a Nittaku fine zip.

About once a year or two.

schneiderss thank you for your comment. Actually I intentionally made it like that so if I do hit it against the table it won’t damage the blade but instead the rubber.

そうですねえ。もし両面が回転重視の攻撃タイプだったら、両面０５も悪くないです。ボール先週みたいに。バックの攻撃力や安定性が上がるが、バックの防御の方はちょっと弱めるかもしれないです。それが良ければ両面０５お勧めします。

shingoukiex 了解です！ありがとうございました！チャンネル登録致しました（前からしてた）

ありがとうございます！

バヤリース サーブだけで悩んでれば反転して使うのがいいかもしれないですね。

Wreckz Gaming very good place

Alex Skyer I used to do that when using speed glue, sometimes even doing 3 layers. I'm not too sure if more layers of water based glue affects the performance of high tension rubbers nowadays. Speed glue was made for older rubbers without tensor technology, however, since the ban of speed glue and the introduction of tensor rubbers, personally I think there's not need to apply multiple layers of glue anymore, as that's what tensor technology does.

I get it. Thank you so much for your timely answer!

Alex Skyer you are quite welcome

I glued a Donic Bluefire M1 for a friend and I had to use two layers on the rubber, because the sponge was too porous. The first layer was almost completely absorbed by the sponge.

Luiz Carvalho I think so too!

Agreed! I use these two on a boll forte blade, and love it!

Actually h3 and t80 is better

Also becuz of Viscaria

themaestromusician Sorry. I’m not too familiar with these types of rubbers.

RODOLFO MERO probably. I keep my old rubbers and sometimes put them on other blades I have.

I think the butterfly sponge, or Nittaku.

Well myself i use the bat/racket he’s using which i think should be VISCARIA and could cost up to 200$

dsarrafi Hi. The applicator is called Butterfly clip sponge. It comes with a plastic clip and about 10 cylindrical sponges.

*shingoukiex* Thank you so much!

Victor Y yes I would. It helps protect the blade!

@@shingoukiex Is there any sealant you would recommend? Also, why do you cut two times, don't you get different angles for the cut of the sponge/rubber?

Florin Carata I have yet to use it myself. Actually I would like a good recommendation from someone as well. Cutting it twice ensures that the rubber or sponge won’t be damaged. The first cut cuts through the sponge only, and the second cut is through the rubber.

shingoukiex I have the same setup but the scalpel’s blade is smaller and it cuts very easily . One pass without much pressure and it’s done. I am satisfied with the result, but next time I will be looking at other blades.

Florin Carata yea, the blade I’m using is just a surgical knife. It can cut in 1 go but I just want to make sure nothing breaks or rips.

J SG yes you can. Just be careful when removing the rubber.

You can use a scissor or razor blade. Looks like he used some form of scalpel/construction knife

Roger Dodger I used the nittaku finezip

80 is fine. It’s a good balance of speed and spin. Alternatively you can use 64 on your forehand as well.

K yes. The most important thing is to do it at a medium speed. Not too fast and not too slow. It also depends on the brand of the rubber. Some sponges are harder or softer than others, causing it more likely to tear.

shingoukiex thanks! Also, is there anything different about glueing and removing long pips?

acétone

ブドウマスカット よろしくお願いします！

Prajwol Prajapati I bought the glue on Amazon. The brush is a clip with a cylindrical sponge. Amazon also sells them.

As you can see in the video just one on both the rubber and the blade. There isn't much point in using multiple layers of water based glue. Only use multiple layers for speed glue.

Mladen Momcilovic I use them for about a year before switching. After a year the rubber surface starts to fail to grip the ball well.

Maria Dalee I can play right away if you want, but I usually put it under some heavy books for 1 night.

The one I use is a surgical knife for operation. You can use any sharp cutter knife and it'll work fine.

Ognjen Jokicic any water based

@@maksf3102 what on earth name is that

jomtack kreanga glue used is nittaku finezip. I used the rubber for one year.

+shingoukiex yeah thanks I'm deciding free chack, nittaku fine zip, Andro turbo fix. I want so hard stick glue.

Ondrej Páleník yes you can. However due to contact to the glue it might have shrunken in size.

@@shingoukiex ok, thank you so much 😊

Elmer’s

I’ve never used it but depending on the combination of the wood it can be a good racket.

Just one

@@shingoukiex thank you,

_ RulesTV no, T05 has a slightly harder rubber so it's more suited for the forehand. T64 is for the backhand, it has more control on passive plays like backhand blocks or punch shots.

yuu ki いいと思います。05がおおすすめです

shingoukiex 分かりましたフォアは05にしてみます バックハンドで攻撃すること多いんですけどロゼナでも大丈夫ですかね？

yuu ki 大丈夫です ろぜなは80に似てる

shingoukiex 元々両面テナジー80なので大丈夫そうです ありがとうございます チャンネル登録しましたのでこれからもがんばってくださいあ

shingoukiex 元々両面テナジー80なので大丈夫そうです ありがとうございます チャンネル登録しましたのでこれからもがんばってくださいあ

Yea. I'm not very good at cutting with scissors either. It ends up like dog bites lol.

thunerOCEAN blade is about 20000 yen. Rubber is about 7500 yen each

Hi. It depends on how much you play. If you play daily and take good care of it I'd way 1 year period is good.

Vu Nguyen no I didn't

any damage on your blade? how often do u change your rubbers? thanks.

albert lopez No damage. I take a lot of care when changing rubbers especially when peeling. I change rubbers roughly once a year. Recently I've switched to Xiom rubbers because T series is too over priced for me to keep using on a yearly basis. Please watch the newest demonstration of my on gluing new rubbers! Thank for for your comment.

@@shingoukiex I play with Xiom Omega VII Tour max on forehand and Tibhar Evolution Mx-s max on backhand on Tibhar Fortino Pro blade. Is it good setup? I am wondering if the mx-p on backhand would be better. Thanks

@@shingoukiex are you using a scalpel handle with discarding blades? where did you get those?

Yes. It's quite good.

That was also my question.. someone mentioned that any water based glue is okay.. so my first thing that pops on my mind was elmers glue..

That just makes it harder to get straight and also you do it like this to avoid air pockets.

Probably not. Difficult to glue and they will be dead rubber

Sowmiya Ganesh Sowmiya watch my other videos there are captions

nittaku fine zi p

I'd recommend Butterfly Bryce Speed or High Speed. It's the rubber that Wang Hao use.

Not really. You let the adhesive go transparent before putting it together and it sticks very quickly, the drier is just to speed up that process. You can just leave it until it goes transparent

Ben Fritz its a surgical knife.

shingoukiex There are knives like that for art.

jtrttnmvtvvn

矢吹俊人 ビスカリアですねえ

shingoukiex いいですね❗️ビスカリア❗️俺もいつか欲しいです

矢吹俊人 そうですねえ とても良いラケットと思います。

shingoukiex ですよね〜👍 俺の知り合いも持ってて打たせてもらったらすごかったです

矢吹俊人 世界一ラケットだと思います。自分は二個を持っています。他のビデオも見てください。チャンネル登録もよろしくお願いします。

Florence Albano neither. A scratch on the rubber will rarely affect the performance.

shingoukiex are you sure its a 4 inches scratch and I have a competition next week

Shing was saying a scratched , just a small one . Use your commonsence .

kartik sharma yes

kartik sharma yes

Cynthia Abutan nittaku finezip

Prajwol Prajapati amazon is an online shop.

It's a side tape that protects the edge of the blade from damage.

Ok thanks

Np

Nathz A rubber stupid

Lol

Nittaku Finezip

Fjr afi To make the sponge a little bit wet. It makes it a bit easier.

Fjr afi what is the liqid by which you make the sponge wet and how much does this padle cost i mean the wood and the rubber cost

mohammed asi I just used water. The blade is about 150 USD and rubbers are 70 per sheet.

shingoukiex thanks alot in iraq we have cheaper wood and sheet but they are not as good as yours

That is Viscaria right? 150 USD for that blade? Wow.. Here in Indonesia it's price about 97 USD

the Blade 130€ and the Rubbers per Sheet 56€.

Robert Stop yes.

the best of the best ......Finezip

Santi Torres hello. Even if the pair of scissors are Sharon u still won't get a perfect clean cut because every time you stop to change the angle of the scissors you will get more or less an edge sticking out.

Thank you =D I cut the rubber with a blade and that give me a good clean cut thanks.

rozzner tellen it won't stick if it's wet.

jomtack kreanga nittaku finezip

lol

After drying the glue sticks better.

Dapper Fob they make it square because every blade has a different size, so if they make it round, it might not be big enough to fit some of the blades.

Oh right i get it

Paul Tran I’m pretty sure it’s one sheet

T_T thank you!

GamingWithLucky of a blade?

Not so nervous just looking for perfection.

Post me (your neighbor in Japan) this SAME bat & rubbers (Tenergy 05) & I will post you 5,000 piso.