No video
How To Change The Oil On A Pioneer 520 / 2021 HONDA PIONEER 520 SXS / Basic Service /MAX’S MOTO SHOP
Рет қаралды 20,046
3 жыл бұрынHello viewers today I change the oil and did a basic service on the 2021 Honda pioneer 520 side-by-side please make sure if you were doing this yourself that you buy the proper motorcycle oil or do the best thing and go at the Honda oil if you have any questions leave them in the comments below
My Recording Gear:
Cell Phone Tripod: amzn.to/3qrTKly
Cell Phone Chest Mount: amzn.to/3tYWpp3
Rode Lavalier Mic: amzn.to/2OHgsIB
Aperture Mc Light: amzn.to/2LSPRqS
My Tools:
T-Handle Star Wrench: amzn.to/38KfkLh
Allen Key T-Handle amzn.to/3bQyzEV
DeWalt Impact!!: amzn.to/37iHsV7
Dirt Bike Stand: amzn.to/3rV6SjB
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content each week!
@markkroenke 3 жыл бұрын
Great video, all the relevant information with no fluff. Really appreciated. Would love to see more videos on 520 maintenance like coolant replacement, changing final gear oil, etc.
@Maxsmotoshop 3 жыл бұрын
I’ll see what I can do on the rest of those videos thanks for your comment👍👍
@compasslife6658 3 жыл бұрын
Quite a process for an oil and filter change! Nice job with the video. New subscriber 👍
@Maxsmotoshop 3 жыл бұрын
Yes it is a little bit of a bugger to get at it thanks for the sub stay safe out there
@Giddyup6999 3 жыл бұрын
Just ordered mine, should arrive in late March - thanks for posting!
@Maxsmotoshop 3 жыл бұрын
Great choice I’m sure you’ll enjoy👍
@Giddyup6999 3 жыл бұрын
@@Maxsmotoshop Thanks - I'll be following your channel for maintenance tips, etc. etc. Thanks again for your work and effort! appreciate it.
@vernshein5430 3 жыл бұрын
Great video, thanks!
@Maxsmotoshop 3 жыл бұрын
You’re welcome👍
@doc559 3 жыл бұрын
🏆🏆🏆👍🙏 Subscribed Thank you for sharing
@Maxsmotoshop 3 жыл бұрын
Thanks for the support that is greatly appreciated
@ExperimentalAircraftChannel 3 жыл бұрын
You have to remove the entire computer and half of the wiring harness to it just to change the oil filter??? Is there a better way @AppalachianMountainRiders ?? Show me a better way please. Wow Honda.
@Maxsmotoshop 3 жыл бұрын
Yes you do have to if you go watch the other guys video on his 500 service he does the same thing it is not a complicated process though thank you for your comment
@boatrvme8478 2 жыл бұрын
They want to make it difficult so you will take it to dealer for service!!!
@billhelmick9721 2 жыл бұрын
This video was a great help in my oil change. Can you do a clutch adjustment video on the pioneer 520? Or is like the 500 loosen jam turn adjusting screw 1 full turn clockwise and then counterclockwise into resistance is felt? Thanks in advance.
@Maxsmotoshop 2 жыл бұрын
Yes it is the exact same as the 500
@rogerthomas169 Жыл бұрын
Excellent video, thank you. Doing as many as you do, you can guage how much torque you're applying, I still need a torque wrench, at least for the first couple of times. The only other thing is, you didn't address the spring behind the oil filter
@Maxsmotoshop Жыл бұрын
Yeah, this was one of my early videos years ago definitely forgot to mention the spring. I do this so often I know it’s there. I know it doesn’t fall out on me. Someday I’ll make an updated video.
@patkiely1004 3 жыл бұрын
Honda....PLEASE put a spin on oil filter, storage and a roof. Sales will skyrocket.
@Maxsmotoshop 3 жыл бұрын
Agreed thanks for the comment
@donschlonski2936 3 жыл бұрын
Spin on oil filter ain't going to draw one extra customer. If you want the machine you're not going to be scared away it from this
@alexdavis6655 3 жыл бұрын
I’m still trying to decide between the 500 and 520. I see the benefits to both. One of my concerns with either of the two machines is cabin noise. I know all sxs are loud at high rpms but how would you say the cabin noise is at cruising speeds. Is it pretty tolerable and comparable to other newer sxs? I had an older teryx and the noise was nearly unbearable. Haven’t had a chance to test drive one of these yet and was just wondering. Thanks for the videos and in advance for any response.
@Maxsmotoshop 3 жыл бұрын
There is nothing better about the 500 the 520 is the superior machine it has a little bit more power on its bottom end and the box was a much needed upgrade in my opinion👍👍👍
@stevenkling9825 22 күн бұрын
What size of socket for the filter bolts?
@markkroenke 2 жыл бұрын
Yesterday, I was not paying attention and learned that it's possible to bolt on the oil filter cover in the wrong orientation, which then allows all the new oil to just leak out. I blame Honda for making the oil filter so damn hard to access. Anyway, thought I would mention on the off chance it saves someone else the hassle of having to clean up 3 liters of oil off the garage floor.
@Maxsmotoshop 2 жыл бұрын
Well hopefully you found it fast before any damage done to the machine
@bervillefreak Жыл бұрын
Just did the same damn thing...watched this video again and were all good now!
@markkroenke Жыл бұрын
@@bervillefreak it’s frustrating eh? You think you’re done and all of the sudden there is oil everywhere. They should make the cover so that it only fits on one way.
@bervillefreak Жыл бұрын
@@markkroenke agreed dude it sucks. Luckily I only lost about ½ liter and had drain pan under but still stupid. I did get a good laugh rewatching this and seeing your comment tho 🤣
@ellobo1326 Жыл бұрын
Shitty shitty shitty design !
@rdkndr1 8 ай бұрын
Done mine today. 25 clips.. not a fast service. It was a pain in the butt. Be patient.
@Maxsmotoshop 8 ай бұрын
Haha
@TheMaddag Жыл бұрын
Great video for a non mechanic like myself! Just bought a 2023 I'm assuming it should be the same as the 21 model?
@Maxsmotoshop Жыл бұрын
yes, exact same procedure👍
@TheMaddag Жыл бұрын
@MaxsMotoShop good deal thank you sir!
@duanehamdorf2228 3 жыл бұрын
Hey max i forgot to ask, do you think it shift better than the 500, loys of complaints about hard shifts. Thanks. Btw, i subbed 👍
@Maxsmotoshop 3 жыл бұрын
Thanks for the support the shifting is probably going to be the same I haven’t heard anything yet I know most of the problems that people had with the 500 was using the wrong kind of oil you have to use motorcycle oil or the clutch as will not work properly and that will cause hard shifting
@duanehamdorf2228 3 жыл бұрын
@@Maxsmotoshop thanks 👍
@Bolt194 3 жыл бұрын
Part number on the oil filter would be nice. I'll be using royal purple synthetic oil on my 520 pioneer. Is this the same filter the Pioneer 500 uses? ty
@Maxsmotoshop 3 жыл бұрын
15412hm5a10 is the part number and whatever oil you use just make sure it is motorcycle oil thanks for your comment👍
@billhelmick9721 3 жыл бұрын
What is the service interval? And is the first one shorter then the standard service interval?
@Maxsmotoshop 3 жыл бұрын
Thank you for your comment the first service is at 100 miles or 150 km each service after that is every 600 Miles or 1000 km
@charterrobinson2677 2 жыл бұрын
First off, thank you for your video. About to place an order for everything I will need to do the first 100 mile oil change on my 520. Will all I need to order is the filter (15412-HM5-A10) and 3 liters/quarts of 10w30 motorcycle oil. Will I also need to replace any o-rings or washers? 91302-KF0-003 or 91303-HA0-004?
@Maxsmotoshop 2 жыл бұрын
Yes you should be good with what you got there I would order a new O-ring and washer and keep them on hand sometimes the O-ring gets pinched and it’s good to have one and the washer usually last two or three uses👍
@charterrobinson2677 2 жыл бұрын
@@Maxsmotoshop thank you for the quick reply! How do you service the transmission? Does it share the same oil and filter as the engine?
@Maxsmotoshop 2 жыл бұрын
Yes it is shared there is only one oil for the engine and transmission
@billhambler8310 3 жыл бұрын
When I had the skid plate off it looked like the oil filter was accessible from bottom.???
@Maxsmotoshop 3 жыл бұрын
It might be but overtime skid plate bolts get worn out and broken and it will be easier to go from the top always 👍👍👍
@nottarded3624 3 жыл бұрын
I have this exact machine. I think these oil changes are unnecessarily difficult. Poor engineering
@Maxsmotoshop 3 жыл бұрын
No not poor engineers they are the problem poor mechanics that have to deal with it👍
@jeremyporter796 3 жыл бұрын
Thanks for video. Will a pioneer 500 roof fit 520. Looking at moose mud roof.
@Maxsmotoshop 3 жыл бұрын
Thank you for your comment as far as I know the roof should be the same but I can double check that for you tomorrow when I go into work I’ll get back to you
@Maxsmotoshop 3 жыл бұрын
I just checked my Honda parts system and they give me the same part number for the 500 and the 520
@chuckycheese381 3 жыл бұрын
What is the part number for the oil filter? And what weight oil did you use? 3 litres? Or 3 quarts?
@Sparkjumper59 3 жыл бұрын
3 liters seemed like a lot to me also. I asked if he was sure on the 3 liters and replying yes ? I’m still a little skeptical. I guess one could go to Honda.com and find out
@Maxsmotoshop 3 жыл бұрын
You’re too funny I hope you are aware that one quart equals 946 mL and 1 L equals 1000 mL 👍👍
@timothysteingass3450 3 ай бұрын
Is there a spring behind the oil filter?
@Maxsmotoshop 3 ай бұрын
Yes
@jimelmore9728 3 жыл бұрын
That oil filter location sucks.
@Maxsmotoshop 3 жыл бұрын
👍
@brianw6093 3 жыл бұрын
Where are all the videos of people's first ride ?
@Maxsmotoshop 3 жыл бұрын
Thank you for your comment very much appreciated at this current time I mostly focusing on the mechanical and Unboxing side of things but the channel is young and I’m sure I will go in that direction in the future
@duanehamdorf2228 3 жыл бұрын
I just order one, im gonna have to take it to a shop to change oil ? Wtf my pos polaris was a easy to do . I'm 64 and beat up, it take me a day to do it . 😠
@hrcnick11 3 жыл бұрын
You need a young apprentice!
@nathanduckeorth806 3 жыл бұрын
Wow gotta take all them screws an plugs off just to get to the oil filter! Looks like a real pain in the ASS! Like working on a new car!
@Maxsmotoshop 3 жыл бұрын
Yeah 10 plastic push plugs and three screws can be a little much for some people👍
@nathanduckeorth806 3 жыл бұрын
@@Maxsmotoshop I have a 16 420 rancher that ain't much better that's why it goes to the dealer for service👍👍👍
@rogerthomas169 Жыл бұрын
@@nathanduckeorth806 what do they charge you?
@gr5ubtn 3 жыл бұрын
Way to much work for a oil change.
@Maxsmotoshop 3 жыл бұрын
The shop is always here to help👍 do me a big favor and hit that subscribe button
@travisricks3436 2 жыл бұрын
Such a shitty design to access the oil filter! HONDA ENGINEERS SHOULD HAVE KNOWN BETTER!!!
@Maxsmotoshop 2 жыл бұрын
Takes me about three minutes to take the plastic panel off it’s not so bad👍
@kevinmaniel8648 11 ай бұрын
Most complicated oil change. Have to remove ecm. Wtf.
@Maxsmotoshop 11 ай бұрын
You mean those three little plastic clips completely exposed once seat is removed
@kevinmaniel8648 11 ай бұрын
@MaxsMotoShop 10 no. remove seat. 10 push pins. 3 screws. And 3 bolts for oil filter cover. And a little Oring.
@kevinmaniel8648 11 ай бұрын
Not complicated. Just over engendered. There is a rubber tampon under the drivers side. Why not have on both sides. Put ecm somewhere else.
@ellobo1326 Жыл бұрын
I love Honda ATV and UTV and own numerous ones. But to have to do so much disassembly and disconnections to change an oil filter is an absolutely horrendous design. My 2009 Yamaha grizzly had a small auto type screw on filter that was easy to get to. C’mon Honda……. you can do better !
@Maxsmotoshop Жыл бұрын
So the 10 plastic plugs and three Phillips screws are too much for you Wednesday takes about three minutes. No big deal.
@ellobo1326 Жыл бұрын
@@Maxsmotoshop The lid with 3 screws and a spring that has to be lined up perfectly in a spot an average male hand hardly fits is a poor design in anyones book. I’ve done it many times and sorry, but your rebuttal won’t change my opinion that it’s way more of a pain in the ass than needs be. Already appears that many other comments have the same sentiments.
@Maxsmotoshop Жыл бұрын
@@ellobo1326 I don’t need to convince you. I have service almost every machine out there and Honda is always one of the easiest and best machines to work on. If you have a problem working on it then maybe that’s just you because it’s definitely not the Honda.
@ellobo1326 Жыл бұрын
@@Maxsmotoshop Were we talking about every facet of Honda maintenance ? NO, simply the design of the oil filter. Seems like you MUST get in the last word and have your opinion prevail. Narcissist ???
@rogerthomas169 Жыл бұрын
@@ellobo1326 the guy's trying to help you and give his honest opinion and start name calling? Seems you had to get the last word.
@stevenkling9825 22 күн бұрын
What size of socket for the filter bolts?
@Maxsmotoshop 22 күн бұрын
They are 8 mill bolts
TK Powersports
Рет қаралды 10 М.
The BN Family
Рет қаралды 19 МЛН
ТВ3 - сериалы и шоу
Рет қаралды 2,4 МЛН
TK Powersports
Рет қаралды 14 М.
HondaPro Kevin
Рет қаралды 41 М.
Garage 54
Рет қаралды 4,2 МЛН