How to change Valve Cover on Toyota 1998 Corolla
Рет қаралды 5,044
3 жыл бұрынDIY & how to change your valve cover gasket also with PCV valve for 1998 - 2003 toyota corolla.
tools you needed
1/4 ratchet
10mm - 14mm socket for 1/4 or 3/8 size
flat screwdriver
picks & hook
channel-lock pliers
angle pliers
WD40 spray
brake cleaner spray
@jimdonaldson107 2 жыл бұрын
Great video. So helpful. Thank you for taking the time to explain everything and for the great camera work. My son and I just changed the valve cover on his corolla. Couldn't have done it without your help!!
@orquizagarage2795 2 жыл бұрын
Your welcome I'm glad my video help you guys finish the valve cover gasket to your son's car
@clusa3721 Жыл бұрын
Thank you for your video and all the tips ( keeping the spark plugs in place, etc) to succeed in that gasket replacement without causing any damage.
@orquizagarage2795 Жыл бұрын
your welcome, also thank you for subscribing and watching my viewing i am trying to grow my channel so i can post more tips and video content.
@clusa3721 Жыл бұрын
After watching other videos I give you more kudos for the covering up of the engine after cleaning up all the perimeter to avoid dropping anything inside the engine. You are really using the common sense that other mechanics fail to use, my friend.
@orquizagarage2795 Жыл бұрын
Thank you sir, I really appreciate your positive feed back. I always do my best to be detailed as much as possible for my viewers so they don't experience hard times by working on their car. Please keep watching and engaging into my channel I'm trying to grow it. Thanks again
@amajeed6662 6 ай бұрын
Great video to save my lots of bucks ! Thank you !
@orquizagarage2795 6 ай бұрын
You’re welcome, I’m glad my video helps you and save you some money too. Also if you’re considering to subscribe to my channel it will help me a lot too. And you’ll get connected with my latest videos
@sixxtoes6 4 ай бұрын
Very nice video, lots of good tips !! Well done !
@orquizagarage2795 4 ай бұрын
your welcome, i'm glad my video help you and you like it too.
@edruth4170 Жыл бұрын
Very good video. You're very organized, methodical and explanatory. Will do my soon with your instructions. Thank you for this video, i would recommend to anyone 👌forgot to asked, do you have video on doing rear brakes in 1998 Corolla?
@orquizagarage2795 Жыл бұрын
thank you for you're support and watching my video, also I'm glad my video help you a lot. on your other question I already did my work on rear drum brakes - however i did not film it, soon i come across with same year corolla i will sure film it to make sure to help out other people. also if you haven't subscribe to my channel yet please kindly click the subscribe to get updated with latest videos.
@edruth4170 Жыл бұрын
Will do, and thanks.
@orquizagarage2795 Жыл бұрын
@@edruth4170 your welcome, I will post more video ASAP.
@martinmoffitt4702 2 жыл бұрын
NO COMMENTS?? COME ON I guess no one is "in a rush" Nice job thank you and be well!
@orquizagarage2795 2 жыл бұрын
Like and subscribe to help grow my channel
@MariaGonzalez-ei1pv 2 жыл бұрын
Great video...well explain, thank you
@orquizagarage2795 2 жыл бұрын
your welcome, dont forget to like and subscribe
@nomadyesmad4875 2 жыл бұрын
You're a good man.
@orquizagarage2795 2 жыл бұрын
thank you, dont forget to like and subscribe!
@Alex_Rodrigez Жыл бұрын
Good job thank you for share 👍
@orquizagarage2795 Жыл бұрын
your welcome, dont forget to like and subscribe!
@fishmanroly7450 2 жыл бұрын
Great video THX papa
@orquizagarage2795 2 жыл бұрын
your welcome brother, dont forget to like and subcribe
@megadeathspike1 5 ай бұрын
Very helpful. Thank you very much kind sir!
@orquizagarage2795 5 ай бұрын
your welcome brother, i'm glad my video help you with your car. and if i can ask you to click the subscribe button it will help me to grow my channel. thank you
@ryszardjacekrusniak7993 Жыл бұрын
Very helpful. Thank you.
@orquizagarage2795 Жыл бұрын
Your welcome, also if you haven't subscribed to my channel, just hit the subscribed button to get updated with my latest videos. Thank you for supporting my channel
@johnadams8025 Ай бұрын
Thank you so much!😅
@orquizagarage2795 Ай бұрын
you're welcome brother I'm glad my video help you and you like it too thank you
@Ci-D3 Жыл бұрын
Thank you!!!
@orquizagarage2795 Жыл бұрын
Please don't forget to subscribe for new video
@nomadyesmad4875 Жыл бұрын
I had worn out seals that caused oil to get in the wells. I tried to soak up what I could, but can't avoid some going down in the chamber once the plugs are removed. I'm getting different opinions about how to get it out and possible damage if you don't. Is o.k. to pull a fuse, cover the hole and blow it out by slightly turning the engine as my neighbor did to 2 of them? How do I get it out of the other 2? Which way is safe?
@orquizagarage2795 Жыл бұрын
It's ok if the oil gets into the spark plug wells, it will get burn out when you start the car again.
@fishmanroly7450 2 жыл бұрын
I noticed you only used a little bit of the copper sealant on each corner is that all that's necessary or should I just do the whole perimeter
@orquizagarage2795 2 жыл бұрын
those are the weak point, thats why i put gasket maker to make sure there's no leak. you can use any color or type of gasket maker
@medini2 Жыл бұрын
can you provide a link to the torque wrench you are using?
@orquizagarage2795 Жыл бұрын
www.homedepot.com/s/1%2F4%20torque%20wrench?NCNI-5 - husky brand www.amazon.com/TEKTON-24320-4-Inch-Torque-2-26-22-6/dp/B00C5ZL2EG -tekton brand www.harborfreight.com/14-in-drive-20-200-in-lb-click-torque-wrench-63881.html -harbor freight brand
@austinwilliams3992 4 ай бұрын
Remeber. Torque wrenchs need to go back to 0 or they will lose their spring tension losing their calibration
@orquizagarage2795 4 ай бұрын
yes yes i've learned that thank you so much for reminder, i always put it back to zero with my 1/4 & 3/8 torque wrench and not my 1/2 torque wrench
@renechavez3789 Жыл бұрын
Did u mean 70 inch lbs
@orquizagarage2795 Жыл бұрын
Yes, this bolts don't need to much its small bolts
@Emmysofly 4 ай бұрын
How much should such a job cost me ?
@orquizagarage2795 4 ай бұрын
hey brother, it only should cost you around $100 + for parts if you buy all the parts, and free labor if you do it....... if you let the shop do it around $300 rough estimate
@Emmysofly 4 ай бұрын
@@orquizagarage2795 okay thank you so much for the fast response
@orquizagarage2795 4 ай бұрын
@@Emmysofly your welcome brother. Thanks for support
@Emmysofly 4 ай бұрын
@@orquizagarage2795 can you drop the link for the blue valve cover gasket 2002 Toyota Corolla ce can’t find it anywhere
@orquizagarage2795 4 ай бұрын
you can find it at orielly auto parts or autozone brand name are fel-pro color blue or red now or go to rock auto .com@@Emmysofly
BundysGarage
Рет қаралды 36 М.
Orquiza Garage
Рет қаралды 490
Orquiza Garage
Рет қаралды 27