How to change wc to commode
Commode Twilt Fitingdo and finish the old w c The use of wc is very rare in today's era The kimod's markit has a lot of variety as weston commode
Changing a WC (water closet) to a commode typically involves replacing the traditional toilet with a more comfortable or specialized seat, often for accessibility or convenience reasons. Here are the general steps you would follow:
1. **Choose the Right Commode**:
- Determine the type of commode you need (e.g., standard, raised, with arms, portable).
- Ensure it fits the dimensions and plumbing setup of your current WC.
2. **Gather Tools and Materials**:
- Wrench set
- Screwdriver
- Putty knife
- Towels or sponge (for cleanup)
- New wax ring (for sealing the base)
- Plumber's tape
3. **Turn Off the Water Supply**:
- Locate the shut-off valve behind the toilet and turn it clockwise to close.
- Flush the toilet to drain the water from the tank and bowl.
- Use a sponge or towel to remove any remaining water.
4. **Disconnect the Existing Toilet**:
- Disconnect the water supply line from the bottom of the toilet tank.
- Remove the caps covering the bolts at the base of the toilet.
- Use a wrench to unscrew the nuts and bolts securing the toilet to the floor.
- Carefully lift the toilet off the floor bolts and set it aside.
5. **Prepare the Area**:
- Scrape off the old wax ring from the flange on the floor using a putty knife.
- Clean the flange and surrounding area thoroughly.
6. **Install the New Commode**:
- Place a new wax ring onto the flange.
- Align the new commode over the flange, ensuring the bolts pass through the holes in the base.
- Press down firmly to seat the commode onto the wax ring, ensuring a watertight seal.
7. **Secure the Commode**:
- Tighten the nuts onto the bolts at the base of the commode, being careful not to overtighten and crack the porcelain.
- Attach the caps over the bolts.
8. **Reconnect the Water Supply**:
- Reconnect the water supply line to the bottom of the commode tank.
- Turn the shut-off valve counterclockwise to restore water flow.
- Check for leaks and ensure the commode fills and flushes properly.
9. **Test and Adjust**:
- Flush the commode several times to check for stability and proper operation.
- Make any necessary adjustments to ensure a snug fit and no leaks.
If you encounter any difficulties or feel unsure about any step, it's advisable to consult a professional plumber to ensure the job is done correctly and safely.
#howtochangeatoilet #howto #howtoreplaceatoilet #howtoinstallatoilet #howtoremoveatoilet #howtochangetoilet #howtoinstall
#cmodtoiletfitting
#cmodtoiletcleaning
#commodetoiletseatfitting
#westerntoiletseatcoverfitting
#westerntoiletseatfittingtamil
old video