How to: Changing the fork seals on my 2005 ZX10R
Рет қаралды 6,097
Жыл бұрынUNIVERSAL MOTORCYCLE FORK SPRING COMPRESSOR TOOL KIT WORKS WITH MOST UPSIDE DOWN SREETBIKE FORKS MADE FROM AIRCRAFT GRADE 6061 ALUMINUM a.co/d/8zwNXP5
Orange Cycle Parts 5 in 1 Damper... www.amazon.com/dp/B0725DKNRD?...
Like, comment and subscribe
@dhatbwoy696 Жыл бұрын
Great video dude, my 08 zx10r just started pouring on the right side, I'll use your video as a guide to try do it myself.
@bikelifecurt5482 Жыл бұрын
Thanks man for watching, goodluck💪🏾 simple process once you follow the steps
@jessefpv9217 Жыл бұрын
Hey bud. The protruding 14mm is measured from the top of the preload adjuster nut to the top of the fork cap nut. Not the triple.
@bikelifecurt5482 Жыл бұрын
Oh man, sold the bike new owner ripped the front end off he only wheelies it like a really fast pogo stick
@kylekons3672 Жыл бұрын
How do you know what height to put the nut that’s internal
@bikelifecurt5482 Жыл бұрын
I just went based off of the manual, you can find the pdf online for the complete manual for free
@fischerfenner6577 Жыл бұрын
Where can I buy that front stand
@bikelifecurt5482 Жыл бұрын
I got mine of motosport.com
@blckhulk 9 ай бұрын
What is the blue tool you used in the video
@bikelifecurt5482 9 ай бұрын
Damper rod bleed tool by motion pro, search that on amazon and it will come right up
@blckhulk 9 ай бұрын
@@bikelifecurt5482 ok and is it a universal tool or bike specific
@bikelifecurt5482 9 ай бұрын
@@blckhulk universal it has two ends for two different thread types
@antmarc3461 Жыл бұрын
So I’m watching this and I’m thinking I could do this. If a guy and flip-flops in his garage could do this I totally can. Lol I finally realized I am not taking on that job. That is way too much. So how much do you think it would cost to replace fork seals at a shop?
@bikelifecurt5482 Жыл бұрын
I was quoted at $600 by my local motorcycle shop
@paulgracey1ify Ай бұрын
@@bikelifecurt5482Holy shit.... 600 dollars. I live in Belfast Northern Ireland and I just recently had my fork seals done and it cost me £140 sterling which is 177.41 in dollars. Brilliant video I enjoyed watching it whilst eating my lunch 😁 Definitely not something I'd tackle myself.
@paulgracey1ify Ай бұрын
@@bikelifecurt5482oh I forgot to mention mine is a 2008 ZX10R
@reeseperrone5166 Жыл бұрын
Looks like you stripped everything out on that bike
@bikelifecurt5482 Жыл бұрын
😂sorta kinda
@masterofdisaster7427 6 күн бұрын
How are your forks holding up, because you put the oil seal in the wrong way. The coil of the seal has to face inwards. And you have to measure the oil height from the top of the inner black tube, Not the outer gold tube. Also pump the damper rod up and down until no more air is in the rod. and then measure the oil height. I hope my comment is of some use to you.
@bikelifecurt5482 6 күн бұрын
@@masterofdisaster7427 i crashed the bike going 126mph…. Just kidding sold the bike to someone who teared the whole thing apart (forks also) and is racing it.
@masterofdisaster7427 6 күн бұрын
@@bikelifecurt5482 Well, everything will fine than. the zx10 is a fine machine,
ISSEI / いっせい
Рет қаралды 82 МЛН
Jason Derulo
Рет қаралды 62 МЛН
Obsession Engineering
Рет қаралды 13 М.
ISSEI / いっせい
Рет қаралды 82 МЛН