How to choose a car amplifier

How to choose a car amplifier | Crutchfield

Рет қаралды 326,290

Күн бұрын

Car amplifiers do a lot more than just make your music play loud - they make all music sound better. But with so many to choose from, which one is right for your car?
Car amplifiers at Crutchfield: www.crutchfield.com/i-rYTVc2I...
Jump to section:
0:00 Intro
0:40 Amps that integrate with your factory radio
1:14 Replacing a factory amp
2:01 How many channels do I need?
3:27 How much power do I need?
4:32 Matching an amp with your speakers
5:11 How to pick out a mono amplifier
6:47 How to match your amp and sub
8:29 What features and controls do I need?
9:20 Outro
A lot of people think of loudness when they think of amplifiers, but that's just one benefit. An amplifier will make your music sound cleaner and more defined even at lower volumes.
Amplifiers can really bring the best qualities of aftermarket speakers forward. Aftermarket speakers, unlike factory speakers, are designed to handle more power, play cleaner, and reveal more detail than factory speakers, which are designed mainly to a certain (low) price point.
Subwoofers need an amp to move enough air to play the low frequencies. Some subs have the amp built in, called powered subwoofers, while your component subs use a separate amplifier.
So which type do you need? 2-channel? 4-channel? 5 or 6 channel? More channels? How much power? Are there certain features you want or need? Our expert walks you through it in this video.
Crutchfield, America's trusted electronics specialist since 1974, has award-winning customer service, free lifetime tech support, and free shipping on most orders. Shop for all your audio and video needs at Crutchfield.com and sign up for the catalog and email newsletter at www.crutchfield.com
See more home and car electronics videos on our channel: / crutchfieldtv

Пікірлер: 787

@smellymala3103 Жыл бұрын

Your cousin walks into your room, he’s done with his first car amp. He throws it on your desk and says, there you go loser. It’s all scratched up, you don’t even have a car, you are 14. You have selected your first amplifier.

@Madkalibyr 3 жыл бұрын

So helpful, thank you! I’ve just purchased 4 speakers,an amp and a sub from you guys. I really appreciate that you offer so much educational material and guidance. You’re a lot more than a store and it’s been a huge help. I’ve never done anything like this so the info is definitely needed

@kasperoon 3 жыл бұрын

This presentation is so precise! I’ve learned so much fm it ‼️ Thanks dude !

@thetruth5672 3 жыл бұрын

Respected sir, you explained every little detail about car audio in less than 7 minutes. Thank you soooooooo much. This video was really helpful

@enermaxstephens1051 Жыл бұрын

This is great, I love these tutorials. I'll keep watching them as long as yall keep making them! Let's see one on everything you sell! Crutchfield is the best

@crutchfield Жыл бұрын

Thanks! 🙂

@creightonjohnson8598 3 жыл бұрын

This information is extremely helpful. I've always appreciated Crutchfield and how much effort you guys put into making sure the customer makes an informed decision.

@oldsmobileaurora7418 3 жыл бұрын

U work for Crutchfield don't cha lol? 🤣😆

@hadbl12 2 жыл бұрын

I’ve read your magazines since the 80s. They were so informative then, this video is no different. Good job

@oldsmobileaurora7418 3 жыл бұрын

I did eenie meenie miney mo and it sounds good to me!

@sidneynangai6879 2 жыл бұрын

🤣🤣🤣

@nawfy6657 2 жыл бұрын

Haha bout to do that too

@adibee88 2 жыл бұрын

Crutchfield-The Audio World's Tree of KNOWLEDGE! This is priceless information, thank you for always sharing! 😉🤙🏽

@iamtaijie 3 жыл бұрын

This video was absolutely helpful! This cleared up everything for me and I know it did for others.. Thank you!

@zbuffered 3 жыл бұрын

Really impressive video, this guy's speaking voice is great and there was clearly a script and production involved. I learned a lot that I might have tuned out for if the presenter and the information wasn't so clear and concise.

@christianmojica1635 3 жыл бұрын

I’ve been a car/boat audio enthusiast/amateur installer since the early 2000s, Crutchfeild has always been an invaluable resource for me

@crutchfield 3 жыл бұрын

Thank you! We sure do appreciate you!

@gregarizmendez5275 2 жыл бұрын

Great video. Very informative. I was thinking of just adding a single 12" or 2 -10" sub box. Nothing huge. So many options nowadays. When I was teenager we used home speakers in our trunks and Pawn Shop amplifiers. 😂

@vachana143j 11 ай бұрын

Man! The 12” is huge already for a car. I guess it’s gonna be sounding great!

@stanleygrant2871 2 жыл бұрын

Thanks for this information this is the most informative video on this subject ,just excellent

@homie-gtv322 3 жыл бұрын

I like those 2 white KRK Rokit speakers in the background. I used to have the black ones back when I had a mini home “music studio” in my closet. LOL. It was a walk in closet, so, yeah.

@adayinthelifeofastagehand 3 жыл бұрын

This Was Very Well Done!!

@bwood6337 3 жыл бұрын

CrutchField makes great stuff!

@nickrose8733 3 жыл бұрын

Thanks. That was great. I appreciated that your power recommendation for amps was conservative as many people think they need 1000W amps. Also, amps should be at or below the speaker ratings. So many people think that you need amps rated higher than the continuous RMS rating of the speakers.

@Xx_xxx_xX185 2 жыл бұрын

Thats not true you actually want to have more rms power from the amp than the speakers because then you dont need to push the amp that hard to get the power needed but if you have amp with lower rms power you are more likely to push it too hard and break your amp or speakers

@josequilez5449 2 жыл бұрын

Nick your gonna blow amps by overworking them to push your speakers. These guys sell audio equipment. That's why they give the limited explanation they do. So you can buy more from them with the feeling that it's spent well instead of actually teaching you the truth.

@javikg7629 2 жыл бұрын

@@josequilez5449 im wanting to buy 4 Sylvester’s rated at 130 rms with two extra tweeters , so should I get a 4 channel 140rms 4 ohm each channel or a 75 rms 4ohm 4 channels

@edwardcartwright8658 3 жыл бұрын

I love the way this was but together very Educational

@blooskyy7 3 жыл бұрын

Perfectly explained, thank you

@ggz55 3 жыл бұрын

Amazing explanation! Much appreciated for it!

@rexlysailas4215 2 жыл бұрын

Clearly detailed buddy. Really appreciate it 👍😇👌

@Hometheaterguy1 2 жыл бұрын

J.R., great video, as always. Maybe make a video on anplifier types: A-Class, type AB, type D, pros and cons. Happy New Year. 🥳🍻

@crutchfield 2 жыл бұрын

Thanks! Great idea. HNY!

@54738299 2 жыл бұрын

This was very helpful. Thanking you.

@bryanCLXT 3 жыл бұрын

I have that alpine s-a60m i love it so much I wanted a second one to bridge and really get things shaking loose!!!! its pushing 1 10 and 1 12 no problem.

@Mad21X 3 жыл бұрын

I learned so much in 10 mins, thx

@anthonycastillo3909 2 жыл бұрын

Awesome info. Thanks, Crutchfield!

@crutchfield 2 жыл бұрын

You're welcome!

@Bacnow 2 жыл бұрын

Crutchfield is my favorite audio source!

@crutchfield 2 жыл бұрын

Awwww thanks! We try to do out best!

@paulhannon9788 3 ай бұрын

Very helpful and well presented. Thanks

@crutchfield 3 ай бұрын

Thanks! It's great to hear that you found it helpful! 🙂

@noorazmi2329 3 жыл бұрын

choose based on your financial capability. other than that, look at your car specifications like electrical system power (you might want to add additional battery and after that can consider power capacitors), so your audio system doesn't short your car electrical capacity even at max volume. you also better use 3x more powerful amp than your speaker RMS because most amplifier will start to produce more than 1% THD after more than 1/3 of total amp power. this is to ensure you can maintain your low distortion listening experience and not to be worried about harsher sound and even clipping your amplifier, as long as you set the small volume knob at 1/3. keep calibrate the amp according to the head unit spec so you can be sure it doesn't go more than the power threshold you've set. if the overall volume is too low, you can always compromise your sq for bigger sound but at higher THD anytime. but make sure the speaker RMS is matching if not more so to be on the safe side.

@kern1110 3 жыл бұрын

the info is great. Tnx. I learnt alot!

@3rdJose 3 жыл бұрын

it's really tmi... need to be more concise

@jalliboy 2 жыл бұрын

go for the bigest you can afford! it is always good the have extra power in case you should decide to go for some thing big ! carstereo is a fun thing.. once you get into it, you just want more. when you feel that hard bass, you just feels so many emotions at the same time :D

@brettleisy356 3 жыл бұрын

Question: I recently picked up a SD 1200.4 thinking it was a 4 ohm version but found out it was the 2 ohm version. this DRASTICALLY changes the power per channel at each ohm variance. the speakers I want to push are 100 RMS but 250 PEAK. I can do 138 per channel running them each on their own channel (running 4 speakers all the same make/model)... one place tells me to run bridged and parallel. but if they exchange my amp for the 4 ohm version I would have 198 per channel at 4 ohm. I get others saying the current amp wont be enough, and yet others saying the current one will be to much in the video it talks about speakers having "Max RMS" and I get the 75-100% thing. but with the RMS having one rating and then my "peak" being a very different number... which rating do I use? and what wiring method would be best. I can exchange straight across for the other amp. should I get the other amp or stay with what I have and wire it in a specific way?

@emmanueljoseph506 Жыл бұрын

A genius in the making

@lukem9707 3 жыл бұрын

Back in 1991 I tried a car audio system in one of specialty shops. It was a Soundstream amp and speakers with Alpine head unit. Best sound ever. I never liked Kenwood amps, they sounded flat. Rockford Fosgate Punch 150 was great. What's equivalent today? What speakers/amps have full, rich sound?

@thatsdeep7058 2 ай бұрын

I love this guy!

@jules1ist 3 жыл бұрын

Very well done:)

@Geosbudy 4 ай бұрын

Man, fot a DIY person, you've just made me rethink a lot 😮

@crutchfield 4 ай бұрын

Sounds like the video is helping you? Is there anything else we can do to help you with choosing the right amp?

@jessef7546 3 жыл бұрын

Well explained. Thank you 🙏

@juancortina5379 Жыл бұрын

Tks for it ,this video is very nice

@crutchfield Жыл бұрын

We are glad it helped! Let us know when we can help again

@r.arodriquez4392 2 жыл бұрын

Thanks for the info!👍🙏😬

@crutchfield 2 жыл бұрын

You're welcome! Glad we could help

@BigPoppa529 3 жыл бұрын

Thanks dude!!!

@fazliekinabalu7012 3 жыл бұрын

Hi bro. Thank you so much for your kind explanation and details this is very useful information for myself (newbie in audio) Seek your kind advise and muchly appreciate it. What is your recommendation i am just install infinity Ref6530cx - 90rms component (front) Ref6532ex - 55rms (centre seat) Ref6532ex - 55rms (rear row) Which amplifier that match for this speaker and how much p.amp channel that you will suggest. Thank you so much for your kind. Subscribers from Malaysia,Borneo.

@sureshsujay7504 3 жыл бұрын

Hii, A great information on speakers and amplifier. I have already bought Infinity kappa 60 csx component speakers 6.5" for front doors. And no subwoofer planned. I need a perfect amplifier for that may be 2 channel. My speaker specs are Infinity Kappa 60CSX 6.5" 2-Way Component Speaker System (300 W 100 RMS). Kindly suggest best amplifier for it. thanks in advance.

@offroadracer268 3 жыл бұрын

I want to power my aftermarket door speakers,tweeters and super tweeters in my truck.The speakers is 35 rms.The Super tweeters is 200W max power,And the tweeters is 350w maximum music power.What size amp should i get with the right channel and rms..Hope you can understand my poor English

@varunsharma8443 3 жыл бұрын

I am looking for a class D amplifier to support 1 pair or coaxial, 1 pair component with 1 pair tweeter and a 8 inch powered blaupunkt gtb200a sub. Kindly help me with a suitable amplifier. Also as the sub is amplified already, does it still need to be routed via sub ?. Not sure if u can, however; i would appreciate if the amplifier is available for purchase in India.

@Boyleheights13 2 жыл бұрын

THANK YOU SIR

@crutchfield 2 жыл бұрын

You're welcome!

@hifiman4562 2 жыл бұрын

I can vouch for the Sony xm-gs4, 4 channel amp. Amazing sound.

@crutchfield 2 жыл бұрын

Awesome!

@michaelkalbarczyk593 Жыл бұрын

Thanks

@crutchfield Жыл бұрын

You're welcome! If you need help choosing or anything further, please let us know.

@24sadboy 3 жыл бұрын

Your video was really informative. Thanks for sharing your knowledge. If you can help me out with some advice that would be great. I have got rockford fosgate P16 6" infront doors. P16 2 way in the rear doors all connected to a factory stereo with a 5 channel amp in Mitsubishi Outlander. Amp R2750X5 that is 750 watt rms. and the sub is a sealed enclosure of 200 rms rockford 12". Am not at all satisfied with the quality of the system and don't want to get it done from the same place again. I am lacking bass and the clerity of sound. Also I do not have much room for sub becuase its behind the third row. But I want Some serious bass to shake the car with clarity in speakers. WHat should I be upgrading? and what specs should I look for while upgrading?

@crutchfield 3 жыл бұрын

If you can change to a ported subwoofer box setup, that will help. Also, find one that presents a 2 ohm load to that amp to get all the power it can give for a subwoofer. The clarity of the other speakers may be able to be increased depending on what was used to help get the audio from the stock system to the new amp. I recommend contacting an advisor to discuss these specifics and ideal changes to get a personal recommendation on gear to help with your goals. Here's how to reach us for that help: www.crutchfield.com/I-rYTVc227/support/ContactUs.aspx

@gubbilo1 3 жыл бұрын

Trying to find a amp to power 4 kicker cs 6.5 door speakers any recommendations have a aftermarket dasaita android head unit with rca connection in back

@crutchfield 3 жыл бұрын

Typically, that series speaker can handle 75-100 watts RMS with their current model, the 46CSC654 handling up to 100 watts RMS and working well with this amp: www.crutchfield.com/I-rYTVc227/p_109STAD4M/item.html

@garyaaron8425 2 жыл бұрын

Thanks for these videos. I spent time with one of your customer service guys and he was very helpful. I have no issues with the speaker install...just concerned about the amp install. Any advice?

@crutchfield 2 жыл бұрын

You're welcome, Gary. Do you need help choosing an amp or help with your installation?

@jonathanfhtv8814 9 ай бұрын

Thanks you!

@crutchfield 9 ай бұрын

You're welcome! 🙂

@moodeymarks2950 3 жыл бұрын

great content !! i still on the stock speakers in my car but i was thinking of getting new speakers for better sound im woundering which amp would be perfect for my bmw f20 116i, 4 speakers 1 subwoofer. best regards

@crutchfield 3 жыл бұрын

Hi! We will be happy to help you out with finding the best upgrades for your vehicle! Please chat with us online or by phone! We will need to gather some additional information from you regarding your personal taste in music, and desired sound quality. We will also need to match the recommended speakers to an amplifier to ensure compatibility. www.crutchfield.com/I-rYTVc164/contact

@matthewbeckett1311 2 жыл бұрын

Great resource, thank you. Have just started researching replacing factory head unit and maybe speakers, and this (with head unit and speaker primers) have answered a lot of questions. Would love to give back by purchasing through Crutchfield - do you have an affiliate (or a suggestion on a) car stereo retailer in Western Australia? Thanks again for the content.

@crutchfield 2 жыл бұрын

We do not have any leads for you in Western Australia. Wish we had different news for you there. If you move to the U.S. or Canada, we can help again!

@ronaldgalvizo3504 3 жыл бұрын

I'd like to install a perfect bigsound for my yamaha nmax 2020.. So would you mind to tell me which amplifier can drive my *2 midrange 5" 100w @ 4-8ohm and mono amplifier for my subwoofer 8" 250w @ 4ohm dvc or a 1 tiny amplifier that can drive to all of my mid and sub.. Hope that you would recommend a tiny amp but powerful enough.. Watching from manila. Have a great day God bless you sir Stay safe

@dee1323 3 жыл бұрын

Would I need to get a higher channel amplifier if I’m using component speakers rather than ‘all in one’ type speakers?

@crutchfield 3 жыл бұрын

Hi Damon! The answer to that question would depend on the speakers you were planning to use. Using an amplifier to power component speakers is not always necessary, but it is the most ideal solution. An outboard amp will be able to power your speakers with greater efficiency, and improve your sound quality of your upgraded speakers. We will be happy to go over any speakers you may be interested in, and provide you with more detailed advice based on your particular application. www.crutchfield.com/I-rYTVc164/contact

@deehagler6865 2 жыл бұрын

thank you for the informative video. I would like your recommendation for my car audio upgrade. I have a 2019 kia stinger GT with stock audio system, I would like to add a sub and amplifier. I am looking for something that will give me a nice thump but nothing too crazy but also nothing that will make me want to go back and upgrade within a month because of lack of bass. . what are your recommendations ???

@crutchfield 2 жыл бұрын

More bass is more fun! Our advisors can help you find the best options for your Kia. Please reach out at your convenience: www.crutchfield.com/I-rYTVc921/support/ContactUs.aspx

@jasminenixon9191 3 жыл бұрын

Hey there. I like your videos. I'm currently trying to find the best kit or set up for my husband's Honda accord. He's on deployment now and I wanted to gift him with some really nice amps and speakers. He loves bass when he listens to his music. He had plans on putting 4 12' in his trunk. What could you recommend for this vehicle?

@crutchfield 3 жыл бұрын

We can help build a system with new gear, subs, and all the wiring to complete the install too. There are more details that we need to know to help and I recommend contacting an advisor to discuss it all and get a personal recommendation on a system. Here's how to reach us for this help: www.crutchfield.com/I-rYTVc227/support/ContactUs.aspx

@devinwork91 3 жыл бұрын

What would you recommend for a complete setup with subwoofers and all in a single cab truck

@crutchfield 3 жыл бұрын

We have lots of gear to fit various pickups that all can sound different in the end. I recommend contacting an advisor to discuss your pickup for the spacing as well as goals for the sound to get a personal recommendation on a setup that will fit yours and sound good to you. Here's how to reach us for this help: www.crutchfield.com/I-rYTVc227/support/ContactUs.aspx

@kngperbs2991 3 жыл бұрын

Hi Crutchfield. A few questions for you: 1) I currently have one X-12 V.2 D4 - Sundown Audio 12" 1500W RMS DVC 4-Ohm X V.2 Series Subwoofer in a custom ported enclosure tuned to 32 Hz. What monoblock amplifier do I need to provide sufficient quality power? 2) I eventually plan on adding a second Sundown Audio subwoofer for a total of two subwoofers, but that won't be for about 7-8 months from now. What monoblock amp do you recommend to power the 2 subwoofers previously mentioned?

@crutchfield 3 жыл бұрын

Based on those specifications, we only offer one amp that can power two: www.crutchfield.com/I-rYTVc227/p_57525001CP/item.html The single sub setup can be powered with an amp that gives it 70% of the top RMS power. That's the minimum we recommend for good performance. This means 1075 watts RMS is the minimum making this amp able to sufficiently power one sub: www.crutchfield.com/I-rYTVc227/p_301HCP1DK/item.html

@MarcusWilmore 3 жыл бұрын

Hey JR, I want to do a component set in the front, two-ways in the rear door, and a sub. I only have 3 preamp outputs in my radio. If I'm running front, mids, and sub with the preamps outputs, how do I hook up the tweeters with an amp? How many channels would I need?

@crutchfield 3 жыл бұрын

If you go with a component set for the front, the separate woofer and tweeter are actually both part of the same front channel. You would be all set if you have 3 preamp outputs.

@alexisbacilio6999 3 жыл бұрын

What door speakers and double din touch screen stereo and amp would you recommend to get if I have a 12" audio pipe bd3 ??

@crutchfield 3 жыл бұрын

Hi Alexis! For immediate service, and a personalized recommendation on a new stereo and speakers, please chat with us online or by phone! We will need to gather some additional info about your vehicle, and what types of features you may be looking for in a stereo and speaker upgrades! www.crutchfield.com/I-rFBKc164/contact

@raniquebrown6518 3 жыл бұрын

Hi. I recently subscribe. Your videos are informative. I have a factory radio, but the factory speakers are no good. I intend to replace and use only the two front door speakers, along with two subwoofers. I dont want a very big system. Maybe 6" speaker for doors and two 8 or 10" for subwoofers. My question is, what amplifier etc do I need to set up this system? I strong await your response

@crutchfield 3 жыл бұрын

3, 4, and 5, channel amps can all be used to power a system like the one you are designing. Also, two separate amps can be used (2 channel and a mono amp) if there isn't a good matching amp in the 3-5 channel models. What speakers and subs are you going to use?

@randomrequirements9066 3 жыл бұрын

Hi, great video - If i get two speakers and two tweeters for my fiet doblo (2 in front), will i have to get a 4 channel amp or just 2?

@crutchfield 3 жыл бұрын

This will depend on the speakers and the amp. You could either way! For more in depth help, I'd advise getting in touch with one of our advisors! bit.ly/2KP1zS3

@noahosborne2574 3 жыл бұрын

Hey I’m planning on getting two 12 inch 500 watt max subs so what amp should I get the RMS power handling is 250 on each one though

@crutchfield 3 жыл бұрын

We're happy to help! Can you provide us with the exact model of your subs? We'll need some specific info so we can determine which amp will work best! Also, will you be connecting the amp to an aftermarket or factory radio?

@philipallen4230 3 жыл бұрын

Great video, really helpful. I'm planning a car audio build and I'm looking at an Alpine 5 channel amp to power four 40 watt 4ohm speakers and two 200watt 2ohm DVC subwoofers. The amp has 4 channels with 40watts at 4 ohms and 1 channel with 300watts at 2ohms. If I run the subs in parallel/serial the impedance will match the amp's 2ohms but the amp would only be supplying 75% of the subs required 400 watts. I was told by a local shop that underpowering the subs like this will damage the subs and overheat the amp. However, in this video, you said, "you should strive to be within 75% to 100% of the subwoofer power". Do you think this setup would be OK? I realise what I'm looking at would be at the lower limit but I'm not looking for a loud system, just better quality. Thanks in advance.

@crutchfield 3 жыл бұрын

this would work just fine! The problems can arise if you A) turn your gains up ( Gain is not a volume knob) and B) run your amp at full blast for a long time. this can stress out the amp over time. Now, 75% of the RMS power should be ok for your subs, any lower and you could risk there being a loss of control of the cones which can lead to flexing, distortion, and stress on both the cones and the coils.

@kevinhinds2108 3 жыл бұрын

Awesome video but I have a couple questions. I bought component front speakers because I had tweeters up front and rear non componet speakers for my 2020 tacoma. I want to add a sub later after I add an amp. Would I need a 7 channels to drive them all? Also the rear speakers are 100 watts RMS and the fronts are 150, should I just go with 100 W RMS? Honestly if you could suggest an amp that will fit under my driver seat that would be awesome too. Thank you for the awesome video.

@crutchfield 3 жыл бұрын

Hi Kevin! For your amp addition, you would need to use either a 5 channel amp to power all of your speakers, and a sub. Or you could also use a 4 channel amplifier and a mono block amp for your subwoofer addition. Please chat with us online or by phone for product recommendations! www.crutchfield.com/I-rYTVc164/contact

@mayiofferyousomealternativ7205 3 жыл бұрын

would it matter if you used a cheap head unit radio for bluetooth and volume adjust if all speakers are powered by a like 5 channel amp?

@crutchfield 3 жыл бұрын

All the gear that is being tied together by a 5 channel amp plays a role in choosing the best amp to power it. We have advisors that can help give recommendations on amps to use. Here's how to reach them for this help: www.crutchfield.com/I-rYTVc227/support/ContactUs.aspx

@ALDEHAAN 3 жыл бұрын

Do I need an amp if my aftermarket headunit has 4 x 55W of power for speakers that have an RMS power of 80W?

@crutchfield 3 жыл бұрын

An amplifier is always beneficial, but not always necessary. Depending on if your head unit is supplying 55 watts RMS, or if that is a peak power rating, would help us be more precise with our information. It would also help to know how sensitive your speakers are. Feel free to connect with us online or by phone, for assistance in real time. www.crutchfield.com/I-rYTVc164/contact

@Vayves 2 жыл бұрын

Hi! I replaced the all stock Boston speakers in my 2011 Chrysler 200s Convertible for kicker CS series speakers, because the previous owner abused the stock system and it sounded like it was on its last leg. And now, they play quite a bit lower on volume, I assume because they are 4ohm vs 2ohm, and the door speakers play only bass, as in the tweeters and mid-range aren't active at all, because the stock system used the door speakers as subs pretty much. And my question is, how do I choose an amp for these speakers? Because most of the amps are for example x4 channels at 90watts, while in my car the dash speakers are 35w RMS, the door speakers are 150w RMS, and the rear seat speakers are 100w rms, and I have no idea what amp to choose with this setup. Any tips would be greatly appreciated!

@crutchfield 2 жыл бұрын

More power is a big plus for the Kicker CS line. To use an amp for everything, your best bet is to move to beefier dash speakers as well. Our advisors can help you choose both. Please reach out to them here: www.crutchfield.com/I-rYTVc921/support/ContactUs.aspx

@LuisMartinez-vr7un 3 жыл бұрын

Hello i have a question.....I have a 2014 Chevy Cruze . I am replacing all 4 doors speakers with (kicker-6 3/4 with 240 watts peak) and i'am trying to install 2 6x9 Rockford fosgate 3-way Coaxel single (4 OHM) 130 watts peak (65W RMS) on the rear deck...mind you the vehicle when i bought it didn't come with rear speakers or(wiring) and no holes were made on the panel only on the main base of the vehicle.So i'am trying to figure what type of amp should i get to support these speakers along in the future if i wanted to add a sub also. Thank you in advance for any help.

@crutchfield 3 жыл бұрын

It sounds like you're going to be running a total of 6 speakers. Do you know what model Kicker and Rockford Fosgate speakers those are? We want to match the speakers to the amp based on the rms power and not the peak power. Also are you using your stock radio or an aftermarket radio with this set up?

@shakenbake2k479 3 жыл бұрын

Are watts equivalent to decibel values? If they are how many decibels would a 50 watt speaker with a 50 watt amplifier produce? Just wondering because I wouldn't want really quiet speakers.

@crutchfield 3 жыл бұрын

Watts are not equivalent to decibels and there is a lot that comes into figuring out the loudest a system can play including the sensitivity of the speaker. Typically, that measurement is the decibel level give with 1 watt played and and standing 1 meter away. Each time that power is doubled (i.1. 1 x 2 = 2 watts, 2 x 2 = 4 watts, etc...), the maximum decibels go up by 3.

@bene__mtb 3 жыл бұрын

Hey, i ordered two 240w speakers for the rear and two 270w speakers for the front, what am should i look for

@crutchfield 3 жыл бұрын

Typically, when speakers will be installed that have two close, but still different RMS watt ratings, it is best to find a 4 channel amp that matches the lower RMS watt rating between the two speakers. We can make a recommendation for you. Which two models did you get?

@spite_beeekilled3643 3 жыл бұрын

i have a 2016 chevy cruz and this is my first time abt to get a subwoofer / amplifer for my car but i need your advice as to how many watz / power do i need for this small compacted car. The factory radio is terrible when i play my own music so i need to boost it up with a sub.

@crutchfield 3 жыл бұрын

One of our advisors would love to help you! pdf.crutchfieldonline.com/I-rFBKc174/ImageBank/v20201106164700/Manuals/022/022RXV6ABL.PDF

@PSIRockinOmega 2 жыл бұрын

If you can bridge that Kenwood amp to use 2 front speakers and a sub, how does that work if the sub needs to have significantly more wattage to keep up with the front speakers?

@crutchfield 2 жыл бұрын

Hi there! We recommend pairing the amplifier wattage output to about 70-100% of the speaker/sub RMS power handling. Some amps, when bridged, can satisfy the speakers as well as the sub, but if you have a sub that needs more power, then a separate mono amp may be in order.

@sunfigt Жыл бұрын

Great video. I have a little different sce ario where my speakers are 2 ohm 75Wrms and the Head Unit is 25W per channel at 4 ohm. Is this putting at risk my head unit? If that is the case can I use a 4 ohm 600 amp to cover the need for power?? Thank you so much for your time!

@crutchfield Жыл бұрын

Most head units are not able to support 2 ohm speakers. If the head unit can support 2 ohms, the owner's manual will list it. If your head unit is one that cannot support 2 ohms, that is likely to put the head unit at risk. We need to check the amp's watts RMS per channel at 2 ohms. The amp should output no more than 75 watts RMS at 2 ohms. If it does not exceed the 75 watts RMS at 2 ohms, then it will work with the speakers

@idr7834 3 жыл бұрын

If the subwoofer installed already has a “Class D Amplifier” built into it like the Kenwood KSC-PSW8, can I install a separate amplifier just to power the 4 speakers, without connecting it to the subwoofer at all?

@crutchfield 3 жыл бұрын

Yes you can amplify the speakers separately from a powered subwoofer!

@giovannigarcia3520 3 жыл бұрын

I have 2001 c320 Mercedes with Bose speakers. Can help enumerate some amplifiers that match with this car,

@crutchfield 3 жыл бұрын

We do not have any amps that can work in place of the Bose amp with the stock radio and Bose speakers. Our amps will need a new radio and new speakers installed to work in your Mercedes. If you want to pursue this, I recommend contacting an advisor to discuss any gear you have now along with goals for the sound to get a personal recommendation on a system including an amp that will work. Here's how to reach us for this help: www.crutchfield.com/I-rYTVc227/support/ContactUs.aspx

@kalval9231 2 жыл бұрын

Hey pretty new to the whole concept but just wondering how I would go about a build with a GT Bass Pro 12 and a Memphis 12” build they both have separate boxes and only one woofer in each I only have the amp for the Memphis is it possible to add my JBL to my system or will I have to add an additional jbl system into the mix? Finally any tips for replacing car electrical components and parts to safely do all this?

@crutchfield 2 жыл бұрын

So, depending on the model of that memphis and its specs, you MATY be able to use a single amp to power both subs, but it is more likely you will need a second amp. One of our advisors would love to help take a look and recommend what you would need! They can be reached here www.crutchfield.com/I-rYALc174/support/ContactUs.aspx

@ZeGermanHam 2 жыл бұрын

Question: I have an aftermarket head unit with 180 watts RMS (45 watts x 4 speakers 4Ω) and I am considering adding an amplifier to power the Alpine RS69.2 6x9" speakers in the rear of my classic car which have 100 watts RMS (300 watts peak power). For this setup, should I be looking at 2-channel amps with 100 watts RMS x 2?

@crutchfield 2 жыл бұрын

100x2 RMS at 4-ohms will be ideal.

@jakehall2666 3 жыл бұрын

I'm looking to replace the 4 door speakers in my f250 and put in a custom sub box with 4 or 6 6.5inch subs. What do I need as far as an amplifier to run that? (Links would be greatly appreciated)

@crutchfield 3 жыл бұрын

One of our advisors would love to help you pick out the right gear! bit.ly/2KP1zS3

@walter8779 3 жыл бұрын

i want to port my truck enclosure with 10 inch subs how wide does the port have to be anybody know

@crutchfield 3 жыл бұрын

Hi Walter! Each subwoofer has different dimensions that are required for both sealed and ported enclosures. Those dimensions are also specific of as to what diameter and length your port will need to be. You should be able to find the dimension requirements for your particular subwoofer, listed within the owners manual of the subwoofer.

@19yenko57 3 жыл бұрын

So what kind of amp is needed to power one set of two ohm front speakers and a pair of 4 ohm rear door speakers at the same time? Does it just have to be 2 ohm stable so to speak? Or do you have to use two different amps?

@crutchfield 3 жыл бұрын

There are amps that can do this. One of our advisors would love to help you explore the options! bit.ly/2KP1zS3

@denzelcarty4986 2 жыл бұрын

What amplifier would you recommend to power the pioneer ts z65ch component and the coaxial speakers. They have a rms of 110watts and peak power of 330 watts. Can I please get assistance with this. I also have a pioneer 2660nex head unit currently installed.

@crutchfield 2 жыл бұрын

Hi Denzel, great choice on the speakers! The Pioneer GM-DX874 is a perfect amp match here: www.crutchfield.com/I-rYALc921/p_130GMDX874/Pioneer-GM-DX874.html?tp=35782

@aamirshakil 3 жыл бұрын

I have a 4ohm 300watt rms sub , i am confused if i should go with a class-d mono amp that has 500w capacity at 4 ohm, a class-ab amp with 200watt rms at 4ohm or any general 4 or 2 channel amp in the bridge mode.

@crutchfield 3 жыл бұрын

If your sub handles 300 watts rms at 4 ohms you don't want to exceed the 300 watts rms whether it's a class D or class AB. Class AB design offers power efficiency and good sound. Class D design has the highest efficiency but isn't quite as high-fidelity.

@loganharrington5848 3 жыл бұрын

Thanks for the video but could I power 4 door speakers and 2 tweeters with a 4 channel amp?

@crutchfield 3 жыл бұрын

It is possible that this can work and will depend on the gear being used. Do you already have the speakers, tweeters, and/or amp? If you do, what are the brands and models of the gear you have now?

@AlexanderXtcSlayin 2 жыл бұрын

asking for help: I have an suv that I just installed 4 jbl speakers on each door. There's also tweeters on the front doors. the jbl's say 165 peak and 55 rms. What's the ideal amp I should get for this system? as of right now I don't plan on adding a sub as I mostly listen to rock music but i know a 5 channel would leave the door open for that.

@crutchfield 2 жыл бұрын

Nice choice on the speakers! The JBL Stage A6004 will power them well here: www.crutchfield.com/I-rYALc921/p_109STA604M/JBL-Stage-A6004.html?tp=35782

@mannypineda4310 3 жыл бұрын

Say I wanted to connect 4 tweeters and 4 mids, each tweeter has 200 RMS 4 ohms and each mid has 250 RMS 4 ohms also, would a 1800 RMS class AB 4 channel amp with 2 ohm minimum work?

@crutchfield 3 жыл бұрын

Hi Manny, It would be best that you get in touch with an Advisor to go over specs, and model information on the speakers and amplifier you are referencing, to ensure we supply you with proper information. www.crutchfield.com/I-rYTVc164/contact

@keyseantaylor6876 2 жыл бұрын

Hey I really hope you see this ice currently got 2 150w 4omb audio pipe ts-cvr6 woofer speakers and an old 360w sub woofer speaker that I had from an old stereo. Now what I want to do is combine them and hook them up to my pc but I'm not sure what to look for in my amplifier

@crutchfield 2 жыл бұрын

We will be happy to help and have a few questions so we can make sure you get an amp that will work. What is the brand/model of the older subwoofer? We need to know some of its specifications to endure a proper power match to the amp. Also, does your computer have the ability to output only bass audio through any of its ports? If it does, what type of port will that bass be output on?

@mohitpisavadia 3 жыл бұрын

i have 2nos 150W front tweeters and 2nos 250w of rear speakers using with my stock mp3 player with output of 50wX4. which type of amplifier should i use? how many watts?

@crutchfield 3 жыл бұрын

More specifications are needed on your drivers to be able to give a recommendation on an amp to power them. Do you have the watts RMS, the ohms, and the sensitivity of them? If not, we might be able to find that information if you have the brand and model of them

@woodrowhancock 2 жыл бұрын

Wonderfully detailed video! Are there any amps today similar to the Phoenix Gold ZX 500 v.2 performance?

@crutchfield 2 жыл бұрын

We didn't carry that model to have its information handy and cannot find the detailed specifications online. If you have them, we recommend contacting an advisor here it discuss them and check for comparable models. Here's how to reach us for this help: www.crutchfield.com/I-rYTVc227/support/ContactUs.aspx

@woodrowhancock 2 жыл бұрын

@@crutchfield thank you!

@MrCoolvash 3 жыл бұрын

Hi...i bought 2 pairs of jbl gto609c component speakers and looking for an 4 channel amplifier which would be perfect fit for them, can you suggest any amplifiers which would be perfect fit for them. please recommend jbl amplifiers too. confusing thing is these speakers are 3 ohms so can i use 4 ohmn amplifier?

@crutchfield 3 жыл бұрын

It is best to make sure the amp can support a 2 ohm load as that means it will work with 3 ohm speakers like those JBL models. There are a lot of amps that can be used to power these speakers including the JBL brand. Here's the ones that will work very well with those speakers: www.crutchfield.com/I-rYTVc227/g_347050/4-channel-Amps.html?tp=35782#&nvpair=FFRMS_Power@@Channel|[rank2]%2061%20-%2080%20watts&nvpair=YCMinimum_Impedance_Unbridged|2

@vapeking8882 2 жыл бұрын

I'm after sound quality but I'm pressed for room and right now have a kicker 4ch class ab amp with mids an highs on in front an its a crew cab with no rear speakers yet and I'm ready to add them and am thinking of moving from the kicker 4ch class A/B to the kicker key 4ch class d and sell the (2) kicker A/B amps and buy 3 of the kicker key amps (2) key200.4 4ch class D amps and a key500.1 mono class D amp. and so finely would ya notice any difference in sound quality from the kicker class A/B to the newer kicker class D amps ??? I know they say the class d has come a long way from what I read but there was no clear answer if the new kickers sound good enough to pass for a class A/B amp??. thanks

@crutchfield 2 жыл бұрын

Just so they are a good match for your speaker specs, the Kicker Key amps offer excellent power and performance, especially for the compact size.

@MrPowerfulcreations 3 жыл бұрын

HI, i have a 600w 12" RMS subwoofer @1ohms. can i power the sub with a 400w RMS @ 1ohm class D amp. is this enough to power the subwoofer? i am using it with factory radio for extra bass. thanks

@crutchfield 3 жыл бұрын

What are the actual make and models of the amp and sub?

@OnomaEponumo Жыл бұрын

What is the best amplifier to get to power my TRF LWT693 (80w rms) speakers and KENWOOD KSC-W1200B(300w rms) subwoofer from the Pioneer MVH-S420BT radio?? I’m lost

@crutchfield Жыл бұрын

We'll be glad to recommend an amp for power. How many of the speakers do you have? How many subs?

@yeromenegron5882 2 жыл бұрын

I want to add 2 10” subs that are rated at 350W RMS each. 700 rms total. Didn’t want to have to upgrade to a bigger alternator or battery if need be. What would you recommend I get? Also, it is going in a Toyota Tundra Crewmax so space is somewhat limited. I haven’t changed the stock head unit.

@crutchfield 2 жыл бұрын

Thanks for the comment! You should be just fine running 700 watts RMS on that battery without any need for upgrades. What year is your truck? Do you have your eye on any particular amp/subs yet?? Also, to make everything work with the factory head unit you'll need one of these: www.crutchfield.com/I-rYALc384/p_161LC2IPRO/AudioControl-LC2i-PRO.html

@sonny9277 3 жыл бұрын

I have a 2019 frontier crew cab with a 10 inch sub what amp do i need also i was wanting the possibility to be able to upgrade stock speakers at some point in the future is this possible with one amp

@freedblowfish3705 2 ай бұрын

Take the watts rms and the resitance of the subs voice coil if dvc it can be wired double and half total resistance of a single voice coil, find an amp with the matching rms power at specified resistance, try match peak of sub to peak power of amp to not overly mismatch, (rms is the importantbpower here though) and low thd and high s/n (snr) because s/n is signal to noise ratio a!d thd is totao harmonic distortion, then wire them propperly :) make sure the amp physically fits where you want to install it

@dionne681 3 жыл бұрын

I want to power some Ground Zero speakers on my Harley and there is no RMS. The power handling listed is 100-250watts. Should I pair an amp @100 watts or is 150/175/200 watt per channel sufficient?

@crutchfield 3 жыл бұрын

We are not familiar with Ground Zero speakers to know them. Setting that aside and looking at the format of the information, it typically refers to RMS watts with a minimum of 100 per channel and no more than 250 per channel. Technically, any of the amps you describe can work with the speakers but its always recommended to avoid the bare minimum when possible so the speakers can become more lively.

@vagish9664 3 жыл бұрын

I have (jbl stadium gto 930) with 110w RMS And 330 peak per pair, and they support 96 db sensitivity with 2 ohm. Please suggest me a best amp plz................. 🙏🙏🙏🙏🙏🙏

@crutchfield 3 жыл бұрын

Are you only planning to power a total of 4 JBL Stadium GTO 930's? And will you be hooking up this amp to an aftermarket or factory radio?

@kylebeach2316 2 жыл бұрын

I'm new to subwoofer set ups and I have JL audio speakers in the doors and just got a factory subwoofer for my car. Its a chevy hhr and I don't know if I need a four channel amp with a mono amp for the sub or not?

@crutchfield 2 жыл бұрын

For most vehicle setups, you can go with a 5-channel amp that provides 4 channels for the speakers and a 5th channel for the sub. You also have the option of using a separate 4-channel amp and a mono amp for the sub. That may change depending on the number of speakers you need to power, but this is typical for many setups. Sometimes the choice comes down to personal preference and price, and sometimes the wattage match is easier with one or the other. We can help narrow the options! What is the year on that HHR? What JL Audio speakers are you using, and do you have any information on that subwoofer?