No video
How to Choose a Finish Nailer | This Old House: Live
Рет қаралды 139,162
Күн бұрынWith four nail gauge sizes to choose from, one size does not fit all carpentry and woodworking applications. Need to know how to pick the right finish nailer? Watch as This Old House Pro2Pro editor Chris Ermides showcases the differences between the types of finish nailers as part of This Old House: Live-[bit.ly/2WYiIgp] an initiative providing daily programming and opportunities to connect with our experts during these challenging times.
#ThisOldHouse #AskTOH
SUBSCRIBE to This Old House: bit.ly/Subscrib...
When it comes to installing trim around windows, doors, baseboards, crown molding, assembling cabinet parts or installing stair treads and risers, as you can see, one nail gun does not fit all. Each of these nailers covers a range of applications. In some cases there’s overlap, but more often than not-you’re not going to get the results you want by using one when the other is the better option.
The difference between them is the gauge nail that they shoot. The most common and readily available types are 15 gauge, 16 gauge, 18 gauge, and 23 gauge. The higher the number, the thinner the nail and the smaller the hole.
So, do you need them all, and which one should you choose if you can only buy one?
15-gauge nailer recommendations:
Metabo [amzn.to/2yL5qKP]
Senco [amzn.to/2Xc7Rzj]
16-gauge nailer recommendation:
Porter Cable [amzn.to/36EZiQP]
18-gauge brad nailer recommendation:
Milwaukee [amzn.to/36ENxKa]
23-gauge pin nailer recommendation:
Metabo [amzn.to/2XKvVrZ]
For more information on costs and details go to thisoldhouse.com [bit.ly/2ZRM7KO]
About This Old House: Live
In these challenging times with so many people at home seeking ways to pass the time productively, This Old House is launching “This Old House: Live”-daily programing and opportunities to connect with our experts.
Follow This Old House and Ask This Old House:
Facebook: bit.ly/ThisOldH...
Twitter: bit.ly/ThisOldH...
bit.ly/AskTOHTw...
Pinterest: bit.ly/ThisOldH...
Instagram: bit.ly/ThisOldH...
Tumblr: bit.ly/ThisOldH...
Keywords:
This Old House, Ask This Old House, DIY, Home Improvement, DIY Ideas, Renovation, Renovation Ideas, How To Fix, How To Install, How To Build
How to Choose a Finish Nailer | This Old House: Live
/ thisoldhouse
@prerecordedresponse9884 3 жыл бұрын
My left ear learned a lot of information. My right ear got some good music vibes.
@toobaddjm 2 жыл бұрын
😆
@maximusmagni1 2 жыл бұрын
Thank you! I often listen to KZfaq with just my right ear bud so I can also listen to what my kids are doing and I thought something was wrong.
@elpatrongaming1147 Жыл бұрын
I thought it was only me 😂😂
@daboogieman69 Жыл бұрын
🤣🤣🤣 same!
@MightyPorcupine Жыл бұрын
Appreciate "to the point" style. No need to skip minutes ahead to get the info you need. Great explainer.
@henryreyes1597 2 жыл бұрын
Finally I understood about gauges uses and differences. Thanks you!!!! For the information🙋♂️
@AlBeebe 4 жыл бұрын
I've been a huge fan of TOH since the 80s watching it with my dad "over the air".... fast forward to 2020 and this is the content i want to see in 2020. Still love everything else you're doing, but THIS resonates with me as i'm tackling some new projects in my house.
@tempesttube 4 жыл бұрын
The audio is awful. Why is the speech audio so muffled and only on the left side?
@wooddawg4868 4 ай бұрын
All of my nail and staple guns are air-operated because I like the continued power air provides. I have one 16 gauge 18 volt nailer by Ryobi and it's all I need. The air 15 gauge is my go-to for me because it's between the 18 Guage and the framing nailer.
@pomarem 3 жыл бұрын
Thanks great review, helped me in my decision making going for the Milwaukee cheers
@donlanteigne8629 7 ай бұрын
When explaining the nail sizes for the 16G I swear I hear you say that the nails range from "three and a quarter" to two and a half inches, I'm guessing you meant one and a quarter?
@theHAL9000 9 ай бұрын
Terrific comprehensive overview!
@Jiggajsmooth89 Жыл бұрын
This guy is either the oldest looking young guy, or the youngest looking old guy I’ve seen….regardless, this is the best video explaining the difference between these nail guns!
@scottslotterbeck3796 Жыл бұрын
Thanks. Gotta buy lots of stuff. This is not a cheap hobby.
@jayeoliver9259 2 ай бұрын
Excellent information
@maxwang2537 3 жыл бұрын
This vid is very very clear and helpful. One more subscriber.
@kairu.kun.z 3 жыл бұрын
Why is audio on left side only?
@tg2631 Жыл бұрын
What length is each nail, ex 5/8? I didn't understand the numbers that were written. This is very helpful regarding gauge! (Hard of hearing) But this video is exactly what I've been looking for!
@willmperez 3 жыл бұрын
Great video, great explanations. 👏👏👏👊🏼👊🏼
@clemmcguinness1087 4 жыл бұрын
Great information thx
@TRUONGSPORT Жыл бұрын
very well made
@MrBabujani1 3 жыл бұрын
Very helpful thanks. 👍👍
@johnayang7163 Ай бұрын
How much
@lavidanormalderay3296 3 жыл бұрын
Yes indeed it helped.
@andrewblack5396 2 жыл бұрын
Thank you!
@JasonLeVega 2 жыл бұрын
great video, thanks!
@EdwardT9 4 жыл бұрын
Music in stereo, voice on the left only. Otherwise, good content. I think I need an 18 gage gun for bead board on a cottage ceiling, and air to be light. Thanks!
@scundoorsup5342 Жыл бұрын
What will the glasses ??
@MrBabujani1 3 жыл бұрын
Thanks .👍
@NB-su9gz 4 жыл бұрын
Guys I'd make that Live logo go away or have it smaller. It's a distraction. Thanks.
@SOONER7290 Жыл бұрын
16 gauge will hold baseboards? I want to replace all by baseboards around the house, but confused on which nail gun to purchase
@REVerbtalk Жыл бұрын
Heck an 18 gauge will. I used them on the baseboards I work on. No you don't have to pepper the hell out of them either,
@SOONER7290 Жыл бұрын
@@REVerbtalk Thank You. What type of nail gun?
@donlanteigne8629 7 ай бұрын
The 16 G will definitely hold it, the 18 G can as well, just shoot the nail in at a slight angle.
@jorgegracia2656 Жыл бұрын
So 16 & 23 a good starting point ?
@scottslotterbeck3796 Жыл бұрын
18 gauge less likely to split wood near the end. Or pre-drill. 23 gauge is too tiny except for thin molding, etc.
@felipea1844 3 жыл бұрын
What type of nailer and nail gauge do I need for wood bed frames, and its wood drawers?
@scottslotterbeck3796 Жыл бұрын
Probably 18 gauge based on my experience.
@rockys7726 4 жыл бұрын
For a professional organization such as TOH this audio is just unacceptable.
@scissorhands6653 3 жыл бұрын
😂
@kuletsolis1871 3 жыл бұрын
sir i have a question.is it ok?
@ryank5281 4 жыл бұрын
my right ear hated this video
@greggc8088 3 жыл бұрын
I have an adapter for my 9MM pistol that drives the 18 gauge fairly well.
@the_jonathan_o 4 жыл бұрын
Am I the only one that hears out of the left side of my headphones?
@qoway 4 жыл бұрын
if you put your headphones on backwards, you can have audio out of the right side.
@OmarGarcia-bi7jq 4 жыл бұрын
Quay Maloney haha 😂 morning
@xxvenegasxx-_rng4749 3 жыл бұрын
@@qoway very scientific
@1sttigertiger426 4 жыл бұрын
Where is Tommy Silva?
@scottslotterbeck3796 Жыл бұрын
Earning the big bucks.
@crmcbrideww 4 жыл бұрын
You're not fooling anyone under those big glasses and hat. We know you aren't Tommy.
@arthurroberts491 4 жыл бұрын
Pretty good except for that guy banging on the drum.
@thejollyfrog640 3 жыл бұрын
At 2:01 he says "3 1/4 to 2 1/2 inches long"
@jaromejacksan6934 3 жыл бұрын
Woodglut has very good designs and plans.
@RicardoJunqueira 4 жыл бұрын
WHO IS THIS?!
@scottslotterbeck3796 Жыл бұрын
The Bat Man
@jamesmcintyre3456 3 жыл бұрын
Lose the background sound it just destroys the production
@v3nomhulk Ай бұрын
Audio on this video is trash
@Billster1955 3 жыл бұрын
Terrible video. Music is to loud and the mans voice is to soft.
@johnayang7163 Ай бұрын
How much
Insider Carpentry - Spencer Lewis
Рет қаралды 136 М.
Anika's DIY Life
Рет қаралды 174 М.
Insider Carpentry - Spencer Lewis
Рет қаралды 50 М.
This Old House
Рет қаралды 44 М.