How To Choose And Use Hardline

Рет қаралды 90,182

5 жыл бұрын

With all the choices and differences in tubing materials today, choosing the correct hardline can seem daunting. Each material has its own pros and cons so you’ll need to consider the specific application or vehicle system that you plan to use it on, before making a purchase. Earl’s carries a wide selection of tubing in a variety of materials and sizes for use in most any automotive system. Follow along while I break down these tubing designs and give you a better idea of their benefits.
Subscribe now to make sure you don't miss any of our new products!
kzfaq.info_...
HOLLEY ON SOCIAL:
Facebook - / holleyperformance
Twitter - / holley_news
Instagram - / holleyperformance
Website - www.holley.com
Product Videos - • Product Videos
PURCHASE: www.holley.com/brands/earls/p...

Пікірлер: 48

@jonnymonza9509 4 жыл бұрын

what ever happened to good competent apple pie teachers like this? easy to listen to. good information. and concise.

@nissanpacific9793 5 жыл бұрын

You guys have awesome informative info. Thanks for this.

@Rossithailand 4 жыл бұрын

Great video at last someone has compared line materials and flaring tools 🛠

@jeffreycoppensjr4728 3 жыл бұрын

That was a ton of great information! Thank you!

@jasonthibodeaux8063 3 жыл бұрын

EXCELLENT video. Thank you!

@MrAuzzie82 5 жыл бұрын

I love this video. I spent HOURS compiling a spreadsheet months back with all the information contained here. I know it was glossed over here, but I would love to see a video about single flare vs double flare vs bubble flare. How to identify 37 degree from 45 degree by sight. What is reusable between tube sleeves/45 degree double flares/ compression fittings. Can I mix and match a 37 degree aluminum fitting and a 37 degree steel fitting. Corrosion inside the lines (ethanol, methanol, oil, water ect). When to use crimped lines vs when to use homemade lines. Again thanks for the amazing information. I wish this video had been out sooner.

@HolleyPerformance 5 жыл бұрын

Thanks for the feed-back, I will try to put together a video to answer your great questions in the near future! Thx J

@masoncampos7043 4 жыл бұрын

@@HolleyPerformance what hardline would be best for E85? Or could you use them all?

@erics3101 3 жыл бұрын

@@masoncampos7043 my question too Mason, did you ever find out?

@takuacheperformance4740 3 жыл бұрын

Great video!!!!

@robertmccully2792 4 жыл бұрын

best video that covers all types of lines.

@jevgenijudin829 3 жыл бұрын

Thank you!

@bigbothoee8617 3 жыл бұрын

Thanks 👍

@ItsJustaMeNow 2 жыл бұрын

Is there a downside to using Easy-Form Tubing as fuel lines? I feel like it's a bit too good to be true, but it would be a Godsend for replacing the fuel lines on a C3 corvette.

@RyanNelly 3 жыл бұрын

What type of metal fitting could and should (with concerns of corrosion or electrolysis) be used to hardline to an aluminum radiator?

@jeremyhanna3852 2 жыл бұрын

I need to run hose/tube on hotrod from the engine driven air compressor to the air dyer this line will get quite warm 200 degrees and need to run about 6 feet and support 120 psi what would you suggest I'm think earls steel line needs to be 1/2 or 5/8

@robertclymer6948 2 жыл бұрын

Need some feedback please. Can the hard line from tank be replaced with neoprene hose from tank to carb? My hard line vibrates from elect pump and is so loud. Thanks much.

@90myaz Жыл бұрын

Hi earl's.. Which is most suitable for my oil coolant sistem, my coolant also had pressure and temperature reaching 120c - 140c

@piotrstasik1015 9 ай бұрын

1:33 2:22 what is the name of this small device that lies above the yellow one on the table, I can't find it anywhere on the Internet.

@Kiret123 Жыл бұрын

why do you not recommend using aluminium line for brake system?

@NateDogg7282 5 жыл бұрын

Are there any problems with using the copper/nickel tubing with E85 fuel?

@HolleyPerformance 5 жыл бұрын

No sir, our easy form line is well suited for use with E85, ethanol, alcohol, and race fuels. thx J

@BasedBidoof 2 жыл бұрын

time to ponder my decision to buy NPT fittings before learning about AN fittings...

@robertclymer6948 2 жыл бұрын

You will like AN fittings. AN = Army Navy. So a -6 is 6/16" or 3/8" -8 is 8/16" or 1/2" and so on.

@BasedBidoof 2 жыл бұрын

@@robertclymer6948 I ended up hurting my wallet up front for the AN fittings. They look so much cooler too, aside from being better

@jamesgiguere6620 4 жыл бұрын

Here is a question: Does the height of the fuel line you run, in relation to the tank and fuel pump, mater? To save hassle I'd like to run my new lines over the inner fender to the mechanical fuel pump in my 73 Torino. This rout will bring them over the height of the fuel pump. and back down to it. Does that even matter? Please help.

@josephkryszczak 3 жыл бұрын

no it doesn't matter. mechanical pumps are suction/puller type pumps. they are designed to pull fuel from a long fuel line. electric pumps need to be gravity fed because they are pusher type pumps.

@noksu_krx1933 3 жыл бұрын

Which lines do you guys recommend for running e85? Please i don't w as not to use ptfe rubber.

@chipcurrey653 3 жыл бұрын

This is debated all over the internet but the general conclusion...especially if fuel will sit at all...is that stainless is the only hard line to use with E85 or methanol. Lots of discussions on yellowbullet about this if you search.

@davidcalkins8087 3 жыл бұрын

For a stainless steel line when should I add the 37 degree flair and when should use the a ferrel and the hard line adapter

@robertclymer6948 2 жыл бұрын

Hi David, YT channel Klowny1969 has a great video showing all of this. Tools needed fittings etc. Check it out.

@detacheddad3396 3 жыл бұрын

What about Winnebago P30

@constructdestruct360 4 жыл бұрын

What the tool being used at 2:23 to make that bubble? Part #?

@HolleyPerformance 4 жыл бұрын

That's an EZ Beader. We have them available for many sizes of tube. www.holley.com/products/plumbing_an_fittings_and_hose/plumbing_tools/beaders/

@tthams73 2 жыл бұрын

Nickel copper is NOT as strong as steel!! It has a similar burst rating. But the tensile strength isn’t even close to that of steel!

@jakeofiach5044 4 жыл бұрын

Is there any reason to not use normal hardware copper pipe?

@appliancedude63 4 жыл бұрын

It's not the same as nicopp.

@talangue 4 жыл бұрын

It will corrode. Ever peel a penny off the floor of a pool?

@BrandonBurns1985 5 жыл бұрын

Any of this good for efi?

@HolleyPerformance 5 жыл бұрын

Yes, all of this should be fine for EFI use. I would not recommend using the radius bead method with a rubber hose for EFI pressures. Thx J

@460capri 4 жыл бұрын

but max diameter is 1/2 for the aluminum fuel line if you made a 5/8 / 10an line I would gladly change over but sadly you dont

@garyhowe88 3 жыл бұрын

Plenty of other companies offer it.

@460capri 3 жыл бұрын

@@garyhowe88 name them

@garyhowe88 3 жыл бұрын

@@460capri last reply got deleted... 👀 google '5/8 aluminium hardline' and you'll get all your answers

@adisaklueangsrichai8844 29 күн бұрын

Hi brother

@tthams73 2 жыл бұрын

Zinc won’t last and doesn’t belong anywhere on an automobile.

@hemifiedsixtyfour2813 Жыл бұрын

Holley/Sentinel Capital Partners, owns to much of the aftermarket performance companys. Their not the only group that has done this. There is not much competion anymore and its not good. Everything is price fixed and the consumer is the one taking it in the ass. Start buying from independent companys if you can, before they get bought out. Can you say monopoly market.