THANK YOU SO MUCH!!!! It worked! My scooter was running rough, dying at idle, not starting forever, waving revs, hesitant on accelerating. New oil, spark plug, filters, valves adjusted did not remove the problem. Then I watched this vid, cleaned the injector (it actually had some fine sand in it) with a brake cleaner and OMG started at a touch!! It has never started that easy!!! I’m so happy 😀 and grateful!!! Made my day!!
@cankose1939 Жыл бұрын
Do you know why the gasoline keeps coming from the tubes once you release it from the injector? I’m trying to work this out but can’t stop the gas coming
@ray83282 жыл бұрын
I don’t have a Vespa but I enjoy Robot’s how to videos, they’re very informative. Thanks for sharing your knowledge and skills with us.
@arthurpendragon72242 жыл бұрын
Where would we be without Robot.
@Matahalii Жыл бұрын
Thanks Robot! I like your videos a lot! Especially the repair tutorials, but never really needed them. This one got me out of trouble, having bought my Vespa Sprint 125 and sitting 160km (like 100mlíles) away from the dealer, which is closed over the hollidays until 01-09-23. I am from Germany, but my little Diva is from Italy, like all of them.
@leeclift46662 жыл бұрын
Had a problem with my girlfriends 2009 gts 300. Returning home from Isle of Wight rally this year. The injector worked intermittently manage to get it sorted using a cable tie round the connector and injector body. Made it home ok replaced the injector.
@abrecki1817 күн бұрын
I have to say that this helps me so much. Greetings from Germany :-)
@fanofoldfans92389 ай бұрын
Excellent tips on cleaning the fuel injector. I know what I'm doing tomorrow.
@deserttec6533 Жыл бұрын
Thanks Robot for sharing, i didn’t understand what’s going on in my vespa until I checked out your video. It’s clear that the injector is dirty and needs to be clean. I will be back with results after the injector cleanup
@stevetaylor86982 жыл бұрын
I love Vespas, for a short while I owned one, a Millenium T5. Alas, I am six foot two and I never really fitted on it very well. I still wish I had kept it though, even as a centre piece for my living room - it looked gorgeous. It will be worth a fair amount now I imagine.
@JakeM2182 жыл бұрын
The modern Vespas are a lot larger than the more vintage ones. Try a test ride on even a primavera or a sprint and you’d be surprised!
@jimmycav3692 жыл бұрын
Great video. Iv done this before direct to a battery, but not with a bulb in series, great idea!
@zeez90532 жыл бұрын
The bulb didn’t light up anyway
@dhonkscooters3980 Жыл бұрын
Thanks from Melbourne Australia Robot, you're a legend!
@brandieraney6705 Жыл бұрын
Very useful and easy-to-follow instructional video. I appreciate it!
@SoulDaddy332 жыл бұрын
Thanks for the nice vid! Wasn't real clear how you had the lightbulb hooked up to the power but I'll look another time.
@mirotolic88602 жыл бұрын
Thank's to you my Gilera Nexus is on the road again! Problem was hard engine start.
@VespaMotorsport2 жыл бұрын
Great to hear!
@johntrane4161 Жыл бұрын
Robot, you'e a life saver. Love all your amazing videos.
@allskoolguru Жыл бұрын
man, this guy is a genius
@chewhockchai11852 жыл бұрын
nice step to clean up the injector .
@VespaMotorsport2 жыл бұрын
You bet
@andrewdaviston3986 Жыл бұрын
Bless you so much for helping us out we love you and our Vespa’s
@billadmond94502 жыл бұрын
@Vespa Motorsport Love you, this tutorial applies to any motorbike or scooter and so it does for my Beverly 350!
@DaisyNMolly2 жыл бұрын
Always great tutorials
@garygildner10362 жыл бұрын
Thanks Robot - all your videos are excellent! Very gracious of you to record these to aid us DIY'ers and in my case, no where close to a Vespa dealer! I have a 2014 GTV300 that sat for many months as had some medical challenges. Now it operates fine EXCEPT it will not idle and stalls out. It will start right back up with no problem, but sure is a disappointment when it stalls. I have run a jug of SeaFoam thru it and that did not help. Since it runs fine at partial and higher throttle, could the fuel injector be the culprit?
@Matahalii Жыл бұрын
From what I have heard, this unstable idling can be the result of faulty recognition if the throttle-pickup I know there are procedures to re-programm the idle-position of it or test a faulty sensor, but I can't remember. Maybe Robot can make a tutorial... ;-)
@billrimmer55962 жыл бұрын
Great suggestions as usual. Robot is the man.
@roywalls55952 жыл бұрын
Thanks for the video! Mr Robot 💯
@VespaMotorsport2 жыл бұрын
My pleasure!
@override392 жыл бұрын
thank you very much
@VespaMotorsport2 жыл бұрын
You are welcome
@tonyd3266 Жыл бұрын
Sometimes I pulse the electric connector and just use a necked down red tube directly into the injector inlet to clean off the pintle that moves back and forth. Interesting that the injector will stay open. I like the compressed air trick - on some cars the injectors wont stay open like that - vespa made it easier to clean out. Thank you Robot for making this. Your name is being mentioned in Vahala. ALSO - is there a tiny mesh-metal filter on TOP of the injector? If so its really smart to replace it (can use a flea-market dental pick to pierce it and pop it out AFTER you have the new one in hand - ive found marine shops are cheap to clean injectors and they have all orings and mesh filters in stock and some even have ultrasonic cleaner methods to boot - if you dont want to risk a house fire. I always do the cleaning in the side yard after a friend had a minor garage fire working on FI and burnt up his cars harness.
@melasurej2 жыл бұрын
... again learned something ... thank you for that...
@endlessmilesrider67568 ай бұрын
Just what I needed to see as my 2015 Primavera has same issue. The fuel pump was replaced and the scooter ran for a while then started choking and died out.
@user-oi4mx5bs1r2 жыл бұрын
Can you come up with a video on how to clean the engine bay for the gts, primavera and sprint models.
@JoeDplummer_ Жыл бұрын
Great video, as Always!!! Thanks! Robot
@AlesMP2 жыл бұрын
Hello thanks for the video what the piaggio mp3 500 has the same injector cleaning procedure.
@gsinsd73172 жыл бұрын
Nice, I was just wondering about this very topic. My 300gts just hit 18k and probably a good idea to get this done. Thanks Robot.
@ENTK872 жыл бұрын
I'm at 76000kms (a bit more than 47k miles) Never had any issues, daily driven :)
@aliyurdakul12 жыл бұрын
The problem is some ppl doesnt ride for months in the winter ....a few years ago i had some issiue with my injector the dealer placed a new injector ...yestersay after 3 months not riding same problem as 4 years ago i did what robot say.even my old injector 4 years ago i tested it now run now fine and this costed me almost nothing i got carb turbo clean at home im very happy now my gts 2013 supersport runs perfect now.thx alot greeting from belgium.
@scottygdaman2 жыл бұрын
Think I'll try a small cut down plastic cup to collect fuel instead of rags. As far as a battery goes could you use a new 9volt or a low current 12v d.c. brick?
@peterhobbs76092 жыл бұрын
Excellent thanks Robot
@VespaMotorsport2 жыл бұрын
You bet!
@bekzodraxmatov1907 Жыл бұрын
Thanks for a video!
@Cataldus3d Жыл бұрын
Thanks for the video! Great as always. Please do you think the same will apply to a Piaggio Liberty 125 2018 i-get?
@chi3fsgarage654 Жыл бұрын
Hello robot. My piaggio start very hard when is raining. But just when is raining. I installed a new battery but still the same.
@davidvader1481 Жыл бұрын
Thanks
@RASKTO Жыл бұрын
Hi, been looking videos, to keep up on old ET4 and many thanks, they are been very helpful!! And as an pre bigger vespa training cause family keep pressing that "we need" bigger vespa to commute.... BUT realised that you never use preventive anticorrosion/ electricity additive spray on connectors!! and been learning that it is good practise on bikes/ cars, helps good connection and life on connector.... so any reason for not to use???
@muriel104Күн бұрын
Why the bulb?
@bfometaldetecter77082 жыл бұрын
Thanks Robot !
@CiroFalconit-fq9xy8 ай бұрын
Hello sir can I ask a little question about vespa. LX150 the problem when the scooter get start after 20 minutes the engine got stop Fi lx150 vespa where. Did I start to check my scooter can you help me for the basic troubleshoot
@cagdasklc7406 Жыл бұрын
Do we still need to prime the fuel line even if we know that the fuel pump is working properly? My Vespa runs and drives but the idle is rough - it sat for a few months. Hopefully cleaning the injectors will solve the issue!
@vernondanielson33162 жыл бұрын
Robot - your videos are great. I have a 2012 VESPA GTV 300 - I rode it 20 miles a week ago then I started it yesterday to move it around in my garage and everything was normal. I shut it off and tried to start it about 20 minutes later and it would fire up for about one second then stall. If I tried it right away it would simply turn over without firing. If I let it sit, it will fire and run for about one second. Any ideas?
@josepramoncodinagarcia-and816215 күн бұрын
What do you think about using fuel injector cleaner?
@febyaditya38842 жыл бұрын
Can you make tutorial to clean throtle body vespa3v ?
@veomaveoma6290 Жыл бұрын
Dealim S2 125ccm direkt einspitz, startet problemlos und läuft wunderbar im stand, beim gas gebwn geht sofort aus... Hilfe
@hondamonkeyboy2 жыл бұрын
Very instructive but for me best left to the Experts.
@Skuxxoffroad2 жыл бұрын
@Vespa Motorsport I suspected this to be my issue. That first clip you pulled off from the fuel line to the injector... do you know where to get a new clip? The white piece inside was broken into three pieces - looks like it should only be two. Only part I can find is from Vespa and includes the whole line
@jamesconner3437 Жыл бұрын
A long time subscriber and loving your vids. Only one decent shop in my region, ad 3 month lead time..:(( Thanks ! Would this removal method be necessary for a scooter that was cutting out , like a couple of sputters and then suddenly a dead stop ?, My Primavera 150 with 8500 miles has started this, worse after it gets warm , not even hot. And then won't take off for a while, just stumbles. For our general information here, Do you consider injector additive worth trying, or go directly to this removal and cleaning ?
@paingphyo8765 Жыл бұрын
Thanks 👍
@DrCh0ngo Жыл бұрын
I want to do this because my gtv300 has been sitting for 7 yrs. But that risk of a fireball is scary. Can we take the fuel injector out and let it evaporate for a few hours before cleaning it? And can we just clean it without connecting it to a bulb and battery?
@AlesMP2 жыл бұрын
hello i have a piaggio mp3 500 and i have a problem when it's cold when i add gas it dies when it's heated but it works normally what could be wrong? thanks for the reply
@LovelyCoralReef-nx9lj6 ай бұрын
Can I clean without the battery wiring stuff?
@bokimarinko87624 ай бұрын
no u cant
@gara84032 жыл бұрын
HELLO How much does an engine cost for Piaggio Vespa PX 150 ???
@therealist7777 Жыл бұрын
Couldn't you just use a 9 volt battery to activate it for cleaning after removing it, instead of using a light to reduce the voltage going to the injector? I've used 9 volt batteries when testing solenoids on my car. I would think that would work, and that the injector could handle 9 volts.
@Yahoo8862 жыл бұрын
Thank you so much for that video Robot…very helpful…..Whats the best way to store a fuel injected Vespa for 3 months…should you just take the fuel injector out and clean and clear it of fuel…then reinstall when you come back?
@roywalls55952 жыл бұрын
I have a 2007 Piaggio mp3 250 IE it have 3,080 miles on it only problem I have on it engine light comes on and back fire when going down the road! I changes out the spark plug wire and spark plug because it had old champion spark plug and looks like never been change since 2007 by the dealer its was tested bike when I purchased it used! Mr. Robot
@Bartusbartusbartusbartusbartus2 жыл бұрын
god bless injection
@zeez90532 жыл бұрын
Can you consider uping your game .You could of given us close ups of what your talking about . Great info by the way