How to clean Acer Nitro Laptop Cooling Fan | Heat Sink

No video

How to clean Acer Nitro Laptop Cooling Fan | Heat Sink | Thermal Paste

Рет қаралды 135,667

3 жыл бұрын

How to dismantle and clean Acer Nitro Gaming Laptop's cooling fan and apply new thermal paste to fix overheating and thermal throttling of processor. Also, I have shown how you can install Nvme/SATA SSD by replacing intel optane memory.
Screwdriver set: amzn.to/3DSMEwm
Thermal Paste: amzn.to/3yonZP9
ISO PROPYL ALCOHOL: amzn.to/3IDcfND
Thermal Grizzly Liquid Metal: amzn.to/3OJrS8Z
Kingston Nvme SSD: amzn.to/3cgYlkK
Check our Amazon store font for more items: www.amazon.in/shop/tekkibangla
If you LIKE this video give it a thumbs up by pressing the like button. 👍 👍 👍 Please don't forget to share with your friends. 🙋👳👨👩
Click here to subscribe to my channel: goo.gl/hckG5w
This will inspire me to make more videos for you all. 💞
আমার বাংলা চ্যানেলঃ / @tekkibangla
If you have any suggestion or question, please feel free to share it in comment section. I will try my level best to help. 😎
Facebook: / tryitstudios
Google+: plus.google.com/+TryitstudioB...

Пікірлер: 245

@centraltension8790 3 жыл бұрын

THANK YOU! You were te only one that cleaned the fans for this particular model . I was 90 degrees idle now UNDERLOAD its 50 degrees. TRULY THANK YOU!!

@tryitstd 3 жыл бұрын

Glad I could help

@Ronphyxia 3 жыл бұрын

Thanks a lot! My temperatures used to be stuck at 95°C every time, but now it's below 80°C 🙏

@sakshamgupta8059 2 жыл бұрын

use a cooling pad with 5 fans and extreme cooling, that will help more

@blastwave2k Жыл бұрын

I was resistant to doing this forever and so glad I did. I pulled a worm looking piece of dust out, and reposted the heatsink. Significantly cooler running after that

@houstonholloway5745 10 ай бұрын

@@sakshamgupta8059yeaa but you eventually need to clean the fans ever so often regardless….

@sakshamgupta8059 10 ай бұрын

@@houstonholloway5745 lol yea.. I mean I do clean the pc every month or every 2 months.. but I meant in case the guy does not know.. Also I have seen that if you keep the pc/laptop cool initially before any task(say using coolpad or somehow with external source not laptop/pc cooling) then it barely risen up to more heat.. Even I sometimes forget to precool it and face the overheating than expected. Just an opinion.. try it out

@houstonholloway5745 10 ай бұрын

@@sakshamgupta8059 oh yeaa most def. I keep a small fan blowing on it and a lot of people make the mistake of having it flat on a surface where it can’t “breathe” and causes the fans to overwork.. I have a monitor riser thingy with holes in the bottom… I’m about to hit up Amazon and look for a cooling pad riser with fans. But I mean gaming laptops are gonna get hot, it’s normal. Especially the Acer nitro 5 lol

@asmrtotakuv3687 3 жыл бұрын

I use my Acer to play pretty demanding games like Ark: Survival Evolved and Conan Exiles and I had to stop playing for a time due to heating issues. This really helped out a lot. Thank you so much.

@groberkriegproductions2356 3 жыл бұрын

same issue but mine is worser it heats even when playing a game from 2008 ooof

@makemoneyrelax 2 жыл бұрын

@@groberkriegproductions2356 lol

@jayanthmdn8946 2 жыл бұрын

I am also facing same issue with my Acer nitro 5 and stopped gaming for a quite some time now I know what to do exactly. Thank u

@cameron5626 3 жыл бұрын

Watched the video 5 times to understand it fully on what i have to do and it worked my computer is cooler now than before thanks man :D

@tryitstd 3 жыл бұрын

Glad it helped

@weatherbeat8958 3 жыл бұрын

10 / 10 thankyou so much this was a truly awesome video that has restored my ability to play high performance games. my problem was once it reached a certain temperature, it would drop in performance to reduce it's heat but now it's gold again!!

@tryitstd 3 жыл бұрын

Glad it helped!

@krystlertabinas3151 3 жыл бұрын

thank you so much, quality of video and instructions is 100% clear got the same laptop and was struggling with the heat, i was planning to go to a shop to clean it and was able to do it alone

@tryitstd 3 жыл бұрын

Glad it helped

@RatonulAdy 2 жыл бұрын

this was so helpfull thank you so much!!! i’ve cleaned my laptop, also upgraded the rams and ssd also can you do a tutorial for changing the hinges, frame and the cover of the screen? because i have so many problems with it

@dalefrancis9414 3 жыл бұрын

4 mins in and I must say this video is perfect.

@patrickflynn8384 3 жыл бұрын

Thank you, Sir, for you help. As a result of your video I have been able to restore the quiet function of my fans and also my CPU no longer approaches 100 degrees C. My next step will be to apply new thermal paste.

@tryitstd 3 жыл бұрын

Glad I could help

@BackDaws 3 жыл бұрын

thanks mate, managed to clean my fans and unclog the heat sink.

@alijahkarjala5491 Жыл бұрын

turns out my acer nitro 5 is missing a ram stick and a few other parts, thanks for this because i probably wouldn’t have known what my problem was if you didn’t post this

@rizkyrix3622 6 ай бұрын

ty for the explanation, my laptop fans been making noisy and loud noises whole time. going to clean this soon!

@dr4k0nm47 2 жыл бұрын

Thank you for making this video, it was very helpful when I needed to clean my Laptop.

@tryitstd 2 жыл бұрын

Glad it helped

@PregrosCorpFuck 2 жыл бұрын

Thank you very much brother!! It helped me so much! Sending love from Czechia

@tryitstd 2 жыл бұрын

Glad it helped!

@papapetunia4905 Жыл бұрын

Thank you helped wonders , I’ll do the thermal paste later down the road when it starts sounding like a microwave again

@dan23217 Жыл бұрын

Thanks so much dude. Video was super useful

@kevg3320 Жыл бұрын

Thanks matey. Very useful, clear and to the point. 😊

@tryitstd Жыл бұрын

Glad you liked it!

@kailhwhitebox 2 жыл бұрын

Thank you for the video. I can not play Assetto Corsa and F1 2020 due to heat issues. This video helped me a lot.

@tryitstd 2 жыл бұрын

Glad it helped

@laptopdr Жыл бұрын

For more information on laptop repairing's watch out this link : kzfaq.info/get/bejne/m999mdV3lru0qqc.html

@muhammadrizqillah8205 3 жыл бұрын

arigatou uncle ,without u my laptop can play play again bhaee, aapako dhanyavaad

@kurtrusselasombrado1092 3 жыл бұрын

After i watched your video, i think it was perfect to help me to clean and put new thermal on my same model laptop but still scared to do because this is my first time.

@tryitstd 3 жыл бұрын

Don't worry, you can do it.

@shazboi 3 жыл бұрын

Thanks a lot! this really helped!

@tryitstd 3 жыл бұрын

Glad to hear it!

@benhaidley1914 3 жыл бұрын

this video is .. thankyou. my nitro was a bit different . but removing the fans and cleaning was the same .. my computer never ran hot, but the fan noise was horrendous. was smething stuck in behind 1 of the fans, this video taught me how to fix it . thankyou mate

@tryitstd 3 жыл бұрын

Great to hear!

@TRASHGHOST666 2 жыл бұрын

Thanks for the video 10outta10 🤝💯🔥

@DaveCore33 3 жыл бұрын

Very useful video, thanks!

@tryitstd 3 жыл бұрын

Glad it was helpful!

@fahrizdaily 3 жыл бұрын

Thanks it's really helpful

@tryitstd 3 жыл бұрын

Glad it helped

@GustavoCosta-ks1mb 2 жыл бұрын

Thank you. Amazing video.

@tryitstd 2 жыл бұрын

Our pleasure!

@adityapawar4692 2 жыл бұрын

Thanks bro, really clear and easy instructions and video

@tryitstd 2 жыл бұрын

Glad you liked it!

@TekkiBangla 2 жыл бұрын

@Yandere chan If you open the heatsink then you have to reapply thermal paste, but if you clean the fan with brush in that case you don't have to use thermal paste.

@lapungyokaba67 2 жыл бұрын

tnx!

@jacksoncross8656 2 жыл бұрын

thanks mate

@shantanu_v1 11 ай бұрын

Thank you very much for this guide, could you please tell me if the process will be same for Nitro AN515-52 ? Also i have 1050 Ti Graphics card, how can i apply thermal pastes on GPU?

@tryitstd 11 ай бұрын

Similar process, but it would be better to watch dismantaling video of the exact same model.

@daedbymusic 3 жыл бұрын

Thank you, very helpful. I was cleanng my Laptop like a year ago and removed the termal paste part. I had no idea what that paste was so i just put it back on without applying new paste. Since then my Laptop gets very hot. I will buy some paste and apply it. Do you think my Laptop took irreversible damage from not getting new paste on immediatly?

@tryitstd 3 жыл бұрын

No, if CPU overheats then your system will automatically turn off. I think you were doing normal task, that is why you were able to use the laptop without thermal paste. If you put load on the CPU then your system will thermal throttle and then turn off automatically.

@sychoj6308 2 жыл бұрын

Thank you my friend

@tryitstd 2 жыл бұрын

Thank you too

@pmehta4452 Жыл бұрын

Thanks for your video.

@tryitstd Жыл бұрын

You are welcome

@abdurraheema6734 3 жыл бұрын

thank you very much sir

@tryitstd 3 жыл бұрын

Most welcome

@kartikkansal7323 3 жыл бұрын

So, how are the temperatures now, and can you also tell what screwdriver size do i need to use to open laptop?

@tryitstd 3 жыл бұрын

75 degree Celsius at maximum load. Size: PH#00 1.8 mm

@xGhost_Rider 2 жыл бұрын

Tanks a lot!

@tryitstd 2 жыл бұрын

You're welcome!

@dawoodabuswai9594 3 жыл бұрын

Thank you Bro

@tryitstd 3 жыл бұрын

Any time

@ligma6930 2 жыл бұрын

Thank you so much! I am a novice when it comes to these. Also is it really not possible to open it up without removing the hard disk and ram? Do I really have to remove both before opening it up?

@tryitstd 2 жыл бұрын

You have to remove the HDD, but you don't need to remove the RAM. But for safety I removed them too.

@Platinum199 9 ай бұрын

@@tryitstdwhat if the model I have doesn’t have hdd and is ssd

@tryitstd 9 ай бұрын

@@Platinum199 Same procedure

@thepenguinmedia Жыл бұрын

thank you

@tryitstd Жыл бұрын

You're welcome

@draganmatkovic4885 2 жыл бұрын

Hi Man can u please share thickness of pads my acer nitro have pink paste instead of pads so what ize could replace paste 1, 1.5,2mm some help would be nice.

@tryitstd 2 жыл бұрын

1.5 mm

@justarandomguy0001 3 жыл бұрын

Hello can you plz tell me which screw driver you used to open the heat sink?

@tryitstd 3 жыл бұрын

Screw driver size: PH #00, but don't buy a single screw driver. Buy a laptop opening kit as it comes with all types of heads and sizes.

@prithvikrishna7255 3 жыл бұрын

Should I follow the same steps for AN515-52 Model?

@tryitstd 3 жыл бұрын

Yes!

@usuallyclueless4477 3 жыл бұрын

In my 2019 version, you have to remove the whole heatsink to remove the fan and get to the vents. Ouch. I can't repaste right now.

@tonyabejero3438 2 жыл бұрын

Can I clean my laptop with brush the way you did while not disconnecting the heat sink from the laptop?

@tryitstd 2 жыл бұрын

You can, but some dust particle will remain inside.

@limjoowee1202 2 жыл бұрын

Nice Vid! May I know what type of screwdriver is needed?

@tryitstd 2 жыл бұрын

Star/Philips head screw. Buy a mobile/laptop opening screw set, because you need different sizes for different screws.

@divyanshujindal4584 2 жыл бұрын

Great video

@tryitstd 2 жыл бұрын

Thanks!

@sandipvijay90 2 жыл бұрын

whenever you open laptop you should remove battery connection , so it will be protected from sorting the motherboard

@ynwaynwa5629 2 жыл бұрын

what do u mean by 'sorting the motherboard'?

@elisiocastillo8553 2 жыл бұрын

@@ynwaynwa5629 probably meant *shorting*

@ynwaynwa5629 2 жыл бұрын

@@elisiocastillo8553 i see thanks

@tariq0813 2 жыл бұрын

I have the exact same laptop with optane Can you explain how you managed to get rid of optane and get installed SSD ? Did you format your laptop and installed windows and softwares in SSD?

@tryitstd 2 жыл бұрын

You don't have to format your HDD. Inside windows open intel optane software and disable your optane memory first (watch the video carefully I have shown it). Once you disable it, only then you can remove it from motherboard. Otherwise your windows won't boot. Now install m.2 nvme SSD in optane slot and then migrate your OS from HDD to SSD. SSD company will provide you a key or access to a migration software.

@tariq0813 2 жыл бұрын

@@tryitstd thank you bro for the help and guidance.

@gunjanshrestha6783 3 жыл бұрын

my helios 300 fan slow spinning but the speed is not controlled by the system and not showing any readings after the re applying thermal paste

@tryitstd 3 жыл бұрын

Install Nitro Sense software for fan speed control.

@Orions17 Жыл бұрын

Are the screws in the heat sink the same as on the fans? I can unscrew the fans but can’t seem to unscrew the heat sink

@tryitstd Жыл бұрын

Same, but slightly bigger in size. Use philips head screw.

@darrylwolfe7359 2 жыл бұрын

Why is that sometimes on other videos that around the cpu and gpu there are substance kinda like thermal paste but different color. Are they thermal paste?

@tryitstd 2 жыл бұрын

Those are thermal pads

@shawnyyyy 3 жыл бұрын

Hi! Can i clean my fans without removing the heatsink? Cuz i dont have thermal paste

@tryitstd 3 жыл бұрын

Yes, you can. Use soft brush to clean the fans.

@FidzDanto 2 ай бұрын

do you have to reapply thermal paste after opening up the fan?

@tryitstd 2 ай бұрын

Yes!

@tariq0813 3 жыл бұрын

I have the same optane model laptop so this video is gonna be very helpful for me. One more question did u ever face wifi and blutooth driver issue is yes how u solved it?

@tryitstd 3 жыл бұрын

I haven't faced any issue with wifi/Bluetooth. If you have any issue then uninstall related drivers from device manager, then download original drivers from manufacturer website (don't rely on windows update) and install them.

@sajelculture8047 2 жыл бұрын

What can be the reason for automatic shutdown randomly during normal usage(not gaming) for nitro 5? I can boot up after some time even though the keyboard blinks painfully.

@tryitstd 2 жыл бұрын

Monitor CPU temperatuer with HW Info sowftware, you can also check keyboard for short keys with Keyboarad test software.

@ttt9618 3 жыл бұрын

Sir my laptop is acer nitro 5 An42 Ryzen 5 rx560x but my fans are not like yours they are adjoined I can't take them out separately without removing heat sinks too what should i do?

@tryitstd 3 жыл бұрын

In that case you have to open the heatsink. You have to replace thermal paste and thermal pad once you open the heatsink.

@ttt9618 3 жыл бұрын

@@tryitstd okay sir

@aYt1816 2 жыл бұрын

Is it safe for me to do thiss? I feel like breaking the seal might leads to future problems with warranty (if there's any)

@tryitstd 2 жыл бұрын

This will void warranty, you shoud do this when warranty period is over or you can go to service center they will charge you nearly $20.

@DSGAuto 2 жыл бұрын

I don’t have much heating, but the fan makes a loud squealing noice when the fan speeds up and it stays loud if I’m googleing or game. Noice is squaling, squaky & grinding noice. Any idea? Maybe need new fans or full kit with new fans and thermal system?

@tryitstd 2 жыл бұрын

Just clean the fans, some times because of dust one side of the blade gets heavier and makes contact with the fan case while rotating, which makes the noise. Also, applying a little bit of grease/lubricant on the bearing might help.

@DSGAuto 2 жыл бұрын

@@tryitstd sadly didn’t work when Intested that month ago, but the PC died right after this comment actually😂😭 Fan made even louder noise and suddenly it shut down with a rude sound. Completely dead, no lights at all🤦🏻‍♂️

@tryitstd 2 жыл бұрын

@@DSGAuto OMG! Take it to service center.

@phoenixskyward9972 Жыл бұрын

I think mine might have fossils inside of it, not just dust.. Thanks !

@MrSwag-cp2gi 3 жыл бұрын

Is thermal paste is effect to performance especially while playing game?

@tryitstd 3 жыл бұрын

Yes, if thermal paste is dried out then it conducts less heat to the heat sink. And try to use a branded paste because high quality paste helps to drop more temperature than ordinary paste.

@himanshusekharsinghdeo8153 3 жыл бұрын

Sir two screws in my heat sink are stuck .what should I do, I wanted to clean and apply thermal paste ,and because of the screw I can't open it.

@tryitstd 3 жыл бұрын

You can apply one drop of oil over those screws and wait for 30 min. Then use precise screw driver to open them.

@NowYouKnow2131 2 жыл бұрын

Sir what is that white rubber like thing under the heat sink

@tryitstd 2 жыл бұрын

Thermal Pad. Pads are costly so you can replace them with paste or reuse them if they are in good condition.

@marcolujan2457 Жыл бұрын

Great video. Hey, if my Nitro 5 never had Optaine memory and I want to install a nvme SSD, do I still have to change the settings on the intel rapid storage technology software? 9:41

@tryitstd Жыл бұрын

You don't have to do anything regarding intel rapid storage technology software. Actually it won't be present in your system as your system never had an Optane memory.

@marcolujan2457 Жыл бұрын

@@tryitstd Thanks

@marcolujan2457 Жыл бұрын

@@tryitstd Btw, do you know what SATA mode do I have to choose in the bios? There's "AHCI" and "RST with optaine"

@tryitstd Жыл бұрын

@@marcolujan2457 AHCI

@brechtdelaet6495 3 жыл бұрын

Thx bro! Really hellped me out! My laptop was slightly different tho and i couldn't get my fans open as easy as you could, nevertheless I could clean it pretty good and my fans spin a lot better now.

@tryitstd 3 жыл бұрын

Glad to hear that

@thamizhamudhank6219 3 жыл бұрын

How did u open the fan in u r laptop. Bcus mine also different model acer nitro 5. And how did u clean that. Plz tell me

@brechtdelaet6495 3 жыл бұрын

@@thamizhamudhank6219 he bro i didn't, but i used my vacuum cleaner to suck out most of the dust and it runs way smoother, just make sure the fans spin.

@reaperpleigamez Жыл бұрын

Does this clean also works for Acer nitro an515 57 ?

@tryitstd Жыл бұрын

Yes!

@MultiNAME69 3 жыл бұрын

What screwdriver set are you using?

@tryitstd 3 жыл бұрын

Philips head/Star size Y#0 or 2.0 mm

@ameer6168 Жыл бұрын

Do you have to remove the ram or it's optional?

@tryitstd Жыл бұрын

Optional

@chintakjoshi 8 ай бұрын

removing optane and upgrading it to SSD have any difference?

@tryitstd 8 ай бұрын

Yes, Optane makes your HDD speed a little bit faster by storing frequently used files inside it. But Nvme SSD is 20x faster than HDD. You have to migrate your OS to the SSD to get the speed.

@davidrj494 3 жыл бұрын

Do you need to remove the harddisk?

@tryitstd 3 жыл бұрын

Yes, otherwise you won't be able to open the back panel.

@SaishPangal 3 жыл бұрын

Do i need to backup my data or anything before i disconnect the RAM and HDD?

@tryitstd 3 жыл бұрын

No, your data won't get affected because of this.

@SaishPangal 3 жыл бұрын

@@tryitstd Finally found the time to do this and i have to say the results are much better than expected. Temperatures have dropped 20°c on average. This was my first time opening a laptop and this video was perfect.

@georgeesquivias613 Жыл бұрын

question can i use tissue to wipe out old thermal paste? thank you!

@tryitstd Жыл бұрын

Yes, you can. Just make sure you do not leave any residue of paper. I would suggest cotton cloths.

@georgeesquivias613 Жыл бұрын

@@tryitstd can old t-shirt be used as well?

@ynwaynwa5629 2 жыл бұрын

what did u say at 8:25: "thermal paste are non conductive so if you put a lil bit extra..." and then what..i cant decipher the words..

@tryitstd 2 жыл бұрын

.... don't worry it won't be a problem.

@furyon9816 2 жыл бұрын

Hey there, I have a question: On my Laptop there is a cable holding the plate. I cant open it 100%. How do you remove it? I haven't seen it in your video (i have the exact same type of laptop) Greetings!

@tryitstd 2 жыл бұрын

I am not sure what plate are you talking about. Look for cable end and use pry tool to remove it from the motherboard.

@krishnalakhi1996 3 жыл бұрын

I have the same laptop ...... A few days ago sparks and weird noises came out of the vents behind..... should I replace the fans?

@tryitstd 3 жыл бұрын

Clean the fans and then check whether it runs properly without any noise. If it does not then you should replace them.

@krishnalakhi1996 3 жыл бұрын

@@tryitstd Can you tell from where I can buy this whole unit ( 2 dual fans and heat sink) in India

@tryitstd 3 жыл бұрын

@@krishnalakhi1996 you will get the fans in Amazon but for heat sink you have to contact service center. By the way heat sink doesn't get damaged easily, so I think replacing the fans would solve your problem.

@krishnalakhi1996 3 жыл бұрын

@@tryitstd Okay thanks for the reply ... Can you please also link the amazon url where I could buy the fans

@tathagatarya1599 3 жыл бұрын

Can you open the cover of the fan too?

@tryitstd 3 жыл бұрын

No, there are no screw to open the fan cover.

@khaledbenhmida9784 9 ай бұрын

I have removed the black plastic bettwen the fans and the thermal Is that ok or not ??

@tryitstd 9 ай бұрын

The black plastic acts as thermal insulator, you should use it, else the morther board will absorb heat from the heatsinks. You can buy new thermal tape if required.

@feenixxx889 Жыл бұрын

What is the thickness of thermal pads

@tryitstd Жыл бұрын

1 mm

@vincesy8417 2 жыл бұрын

Are the CPU and GPU fans the same? Please respond.

@tryitstd 2 жыл бұрын

No, gpu fan has more RPM.

@arjunss1545 2 жыл бұрын

Which size screwdriver do we need for the fan module screws?

@tryitstd 2 жыл бұрын

PH #00 diameter 1.8 mm, but for laptop opening and cleaning you should buy a complete set instead of a specific size screw. All screws are not of same size and shape.

@arjunss1545 2 жыл бұрын

@@tryitstd thanks a lot ....I ordered a kit online but none of the screwhead would open that screw....now I'm about to order another one and I don't wanna go wrong this time 😅. ....I'm replacing my CPU fan.

@arjunss1545 2 жыл бұрын

@@tryitstd bro please help ....I was changing the fan on my laptop and while I was closing the heatsink my screwdriver fell on the motherboard and some sparks came out .....after closing my laptop isn't turning onn ....the charging light shows charging when I press power button the blue power light comes onn for a few seconds then goes away ..... No action on screen or keyboard ..... 😭😭😭 Pls help is my laptop trash now

@tryitstd 2 жыл бұрын

@@arjunss1545 You should have disconnect the battery first. If the spark doesn't damage any chip then removing the CMOS battery may help. After removing the CMOS battery wait for a minute and then connect it again. Then try to turn on the pc. If the PC does not start then you should contact service centre.

@arjunss1545 2 жыл бұрын

I had the battery unplugged it was after the plugging screwdriver knocked off my hand 😭😭 just as I was closing the laptop lid

@OkSear 2 жыл бұрын

0:26 how you take out the harddisk

@tryitstd 2 жыл бұрын

unscrew it and then disconnect the SATA cable, the cable may be tight so use a screw or pry tool to loosen it.

@zestogaming8570 2 жыл бұрын

im scared to open the fan..can i just clean the fans only without taking it out?

@tryitstd 2 жыл бұрын

You don't have to open the entire heatsink, but you need to unscrew the fans. Then flip them over and clean them with a brush or compressed air. @4:00

@zestogaming8570 2 жыл бұрын

@@tryitstd how about that white cable that you pull from the connection?

@tryitstd 2 жыл бұрын

@@zestogaming8570 you have to open it too otherwise fans won't flip.

@yousefsabsabi8049 2 жыл бұрын

i'll ask my brother to help me cuz im a kid and im scared if it doesnt work anymore, but thanks a lot

@geromegarcia3922 2 жыл бұрын

after cleaning my usb port doesnt work? but it gives power tho

@tryitstd 2 жыл бұрын

Gently clean the Motherboard with soft brush and make sure all connections are ok.

@cooldown6959 3 жыл бұрын

Bro . may acer nitro 5 display is flickering i safe mode it already still the same i guess my gpu is the problem how to fix ?

@tryitstd 3 жыл бұрын

I think thermal paste got misplaced. Open the heatsink again and then reapply thermal paste. After applying thermal grease place the heatsink gently and try to align it perfectly while placing it. Do not wiggle it for aligning with the screw holes or pull it back to check. Also if your thermal pads (soft foam tapes on the heatsink) get dirty while cleaning you should change them too.

@freshxrefresh486 Жыл бұрын

did u fix it?

@shsh-rf7mi 2 жыл бұрын

I cannot remove my hard disk completely there is a tape kinda thing connecting it to the inside ? Please tell me what to do

@tryitstd 2 жыл бұрын

watch from this time stamp: kzfaq.info/get/bejne/oLhigLJ_3dPWmJc.html take out the HDD connector with the help of a pry tool or screw driver.

@amitborade3949 2 жыл бұрын

Can you please tell full model number of this laptop

@tryitstd 2 жыл бұрын

AN515-52-593F

@dew-me7266 10 ай бұрын

I’m always the unlucky one that gets one screw that is mega mega tight sigh

@vinayvashisth8083 3 жыл бұрын

I am unable to unscrew the screws above heatsink... Please help

@tryitstd 3 жыл бұрын

Why, they are easy to unscrew. Use star head screw of size PH#00. And don't buy a single screw, it is always better to get a laptop/mobile opening kit. Because all the screws are not of similar size.

@vinayvashisth8083 3 жыл бұрын

@@tryitstd thank You so much Dude for your reply I bought a screwdriver set and done the job But I noticed when I tried opening it with other screwdrivers before buying a proper size PH#00 I have damaged the screws Are they available in shops?

@tryitstd 3 жыл бұрын

@@vinayvashisth8083 You may find them in hardware stores, but I am not sure. And take a sample with you for reference while buying.

@vinayvashisth8083 3 жыл бұрын

@@tryitstd thank you so much🙏🏻👍

@rajerozero6978 2 жыл бұрын

@@vinayvashisth8083 which screwdriver set did you buy? I'm facing the same problem now.

@Feronom 3 жыл бұрын

Why did u take out the ram?

@Feronom 2 жыл бұрын

@@laptopdr that's not the answer, theres karma when you waste peoples time like this. Because time cannot be taken back

@TwistedKrizZ33 3 жыл бұрын

is it safe to do this by myself

@tryitstd 3 жыл бұрын

Yes, it is safe. Just do it carefully.

@pokemooon140 Жыл бұрын

If i just open clean ..and not use TM30 Gel ...hve any problem?

@tryitstd Жыл бұрын

If you open the copper heat sink then you have to apply fresh thermal paste, but if you clean with compressed air/blower without opening then thermal paste is not necessary.

@pokemooon140 Жыл бұрын

@@tryitstd i clean everthing no apply thermal gel...like u say ill do it again but my laptop is making a lot of noise does it mean i hve to order a new fan ? or will be fine after applying the gel ?

@pokemooon140 Жыл бұрын

and i haven't restarted my laptop yet, oky i m going to ...let me tell u after that

@tryitstd Жыл бұрын

@@pokemooon140 It is because temperature is high and fans are spinning at full speed, apply thermal paste. Cheap paste is also available in market.

@pokemooon140 Жыл бұрын

@@tryitstd oky thnks! ..still laptop works fine..without any changes lool

@Badranltd Жыл бұрын

Bro do you play Guitar?? No d00khead I obviously open laptops Thanks bro

@AssToucher 7 ай бұрын

One of the screws just completely refuses to come out, no cleaning for me I guess 😑

@tryitstd 7 ай бұрын

Apply a little bit of rust remover spray and try after half an hour.

@pratikmishra4807 3 жыл бұрын

Hi, my laptop is not detection my graphics card... And the fan is running in full throttle.. Please can you help me solve it.. Model: Acer Aspire VX15

@tryitstd 3 жыл бұрын

Install latest driver for graphics card and nvdia experience center software. If it is a hardware related problem then it would be better to consult with service center.

@pratikmishra4807 3 жыл бұрын

Ok, thank you @@tryitstd

@laptopdr 2 жыл бұрын

For more information watch out this link : kzfaq.info/get/bejne/jKp6aNiTprHPYGw.html

@Morgancj Жыл бұрын

Yo I think I fucked up when I took mine off and that first thing you took off the shiny silver thing is separated now

@exkvizitna 3 жыл бұрын

My screen stopped working, anyone can help me? I try to start laptop, i can hear fan spining but just see blackscreen

@exkvizitna 3 жыл бұрын

Sorry, find solution. I just reopened it, unplug battery, and fans and plug it back. Worked. Thank u so much for video.

@bombud1 Жыл бұрын

step 1, replace an515 with an517-52. temps from 34 at idle to 70 or so gaming on ultra.

@skyz9845 3 жыл бұрын

7:00 can i use rubbing alchohol or does it have to be “isopropyl alchohol”?

@tryitstd 3 жыл бұрын

It depends on the concentration of alcohol, you can use any type of alcohol but it should have 90% alcohol content. Because diluted alcohol won't evaporate. Or you can use petrol.

@brianp6682 2 жыл бұрын

id probably cover in the intake vent on the bottom with a PC computer air filter / polyuethane foam filter and seal the edges with duct tape to prevent dust getting in it.