The simple comment you made of air in the heads not allowing ink to flow was what made the difference for me! Thanks!

From all the videos I saw about cleaning the printer you are the one who explain the process the best. Thank you.

Yep! That did it. Fixed a printer that had been in the attic for 5 yrs. Went from poor to perfect in 10 minutes. Recommended. Saved me a fortune on a new printer.

BRILLIANT video. So clear and concise. The explanation anticipated a little glitch I had. The process worked perfectly. I went from no black printing at all to normal printing in 15 minutes. Many thanks 🙏

Brother Customer Service is the best!! They helped me clean my printer. It was printing red where green should be and green where red should be. She walked me through what she called a "Deep Clean" by pressing buttons on the display. Thank you, Brother!!

Excellent video! Went from nothing printing at all to a beautiful full color page!!!

Success. Had to unplug the printer during printing to get the print head in the middle and accessible on the MFC-J4510DW. Followed all the other directions and this worked great. Thank you.

Thank you, this has worked for me! :-) I bought the cleaning kit through your website that which directed me to amazon. My A3 brother J6520DW is back working. Good clear video even though my printer is a different model.

Excellent tutorial! Thank you!

Absolute Perfection on Describing in Good Detail on how to Clean the Brother Printer: I have seen other Viral's where there was stupid Music Drowning what was said I Have not yet got Round to it But am hoping I'll be able to do the Job:You Make it look easy

Thank you for that. Very clear instructions well given

Hi: your video was very helpful. I got my Brother printhead working again. Thanks for uploading this.

Just purchased the Printhead Hospital solution online and it got my printer working PERFECTLY WELL!! The black ink wasn't even printing anything and its restored it completely! I can't believe how well its worked and how much money I can save on not getting stuff printed at Staples now. Thank you so much for the video too it really helped. It is much easier to do than you think :) Awesome product thank you!

Excellent video. Thank you.

Thank you so much for this great video and I just cleaned my printer and I got it unclogged and I will not be using right away so I did not load it with cartridges just yet.

excelent tip to clean it , i hope it helps me with a mfc-240c printer i had . regards from mexico

Super presentation thanks…

$10 Shipping to Canada. Not worth the cost but a great video none the less. Cheers.

When injecting the alcohol, the syringe was very hard to press and withdraw. I worked it this way numerous times. Still bad printing. Finally, I more forcefully injected the alcohol and then heard a "POP." I thought the black ink line had detached somewhere or the print head was now unclogged I could then easily inject and withdraw the alcohol. And, i could hear air being forced out of the print head. And then, after several cleaning cycles, by the machine, my black print is outstanding! I determined that the "POP" I heard was a valve or clog that was opened up.

My dealer told be that they can only replace the head and it will cost about halve the price of a new MFC. I'm so ordering this right now!

Superb thanku

its amazing how we have the technology to fit a computer in our pockets but cant build a reliable printer

i have a question ,or two ,I have a mfc-j6520dw printer and only the black seems to be clogged have cleaned out before but after a couple pages it for reasons unknown clogs again, also what is the purpose of the small and large sponges inside the printer, the small one is hard and around the print head area and there is a larger container with large sponges in them it does have a clear line connected

my printer doesn't have those buttons for cleaning.... it's an MFC-J47100W. No streaks when I print, but the color is so faint! I did your test strips, everything was too light, only the blue was close to the true color, At least your video made some sense to me. I'm old and technology challenged. Most videos start explaining assuming we know more than many of us do.... it's another language to many of us older folks. Thanks!

I have a mfc 295cn....had it for several years and don't remember a cleaning kit coming with it....what's in that bottle?

any suggestions for getting the tubing onto the printer heads? I'm having no luck.

I have brother mfc 6520 dw printer, I did the same cleaning at home but when I turn it on and try to print or make a copies i get a blank paper no ink no colors vergen paper. What to do else

I'm unable to remove the cartridge on DCP T-500W which has a different cartridge model than the one demoed in the video. Could you pls help with link to accessing the ink tube for DCP T500W? Too bad i bought the cleaning kit before reading some of the related questions/comments here. Your video title should either explicitly call out that you don't support T series or give a demo link to cleaning T series printer

Great

Hi my Black ink is leaking on the edges of the paper and leaves marks on the page do you know what could be causing this

Where is the page you can download that tests all the colours to see if there is any missing lines? Thank you :)

The title says "How to Clean Brother MFC and DCP printers"... which I was hoping meant cleaning it throughout including the feeder. Mine is feeding incorrectly, so I'm still looking for how to clean those rollers etc.

I followed all the directions and was able to inject the cleaner but it flushes right back out again. Doesn't go to the paint head. Nothing on the paper towel. What can I do?

I could not get the print head to move to the middle by pressing the red button, how can I do this my model is mfc-5860cn

When I feed my Brother MFC-6490CW from the feeder at the top I get a black line down the side of the scan or copy page This does not happen if I lift the top and place the page on the window inside the printer

My printer have improvements but some nozzles not work, what to do?

Hi , can i use ethanol as a cleaner solution?

My print heads are no longer clogged and the test pattern shows no missing blocks, but now everything is too light overall. Could there be fluid in the lines diluting the ink? What can I do about this?

How do you clean the roller heads?

I have a dcp-t700w. It has an ink Tank, is there a way to do this on that set up?

I cleaned as instructed. Still have 2/3 full of black ink, but still will not print black. Anyone have something similar?

Hi, I did this instruction but now my printer don't take ink, I did more than 10 cleaning but it didn't help :(

hey sir, my clear strip that u mention at 3:17 of the video, my printer has ink on it and i cant remove it... and it cause my printer to cant init error 50 code always.... how to solve that?

Sir my printer is telling paper jam. But there is no paper. MFC-465 CN. Please help me.

So what if a color or in my case black(not a color😉) still won't print after cleaning?.... the printhead is cleared... fluid goes through fine.... colors are fine just black won't print... seems like it may put a little black(super faint grey shade) on the print quality test but that's it....

I've had this problem because I dont print every week...that's why my laser printers never give me this problem.

My copies come out green, should I clean the print head

The print head doesn't come out after I hold the red Cancel button for 3 seconds on my Brother MCF-230C.

This worked - Thank you!!!

Why is my brother mfc 240c Printer saying paper jam An there no paper jam ?

Help! The print head wont come out after holding the stop button i have a MFC-235C.

How do I remove the colour cartridges from a T500W. Please help

I do this approach and it work , couple days and returns doesn't work ☹️ what can i do to it??

Pls dear Printhead Hospital We neeed your help here, can you make a video (tuto) on how to clean or change Brother DCP J4110 Absorber box????

my printer keep saying my magenta ink need to change even though i change it twice, what do i do, i need to print my work

i am not able to open my brother dcp t300 printer ink tank out please help me.

How to get rid of the message “unable to print 51”

I have unable to print 4F error mine is J100

This only pertains to INKJET printers and to the MFC Laser printers. The title should be corrected.

this video is to selll a colourless liquid you can probably make yourself out of distilled water SO HOW DO YOU CEALN THE WASTE DUMPED???????????????? COLOUR TANK INSIDE THE PRINTER OR DO YOU JUST THROW IT AWAY FFSAKE??????????????????

Hindi me batete to aacha hota

The heading needs to be "how to clean print heads of BROTHER MFC AND DCP......"

Too bad the double echo in the room. Difficult to hear instructions

This is not concise. Spends too much time on what it could be THEN gives instructions without telling you how to get to where you need to be.

Thank you very much, now the color blue is working again :-)