Niche - www.nichecoffe... Follow me on Instagram / hoonscoffeeaz As an Amazon Associate I earn from qualifying purchases.
Пікірлер: 66
@ecstaticducklin3 жыл бұрын
Thanks for this video. I had a problem calibrating my Niche and the video made by Niche didn't help solve my problem. Now I know I need to first screw the bottom bit (only) to the calibration mark and then screw the upper bit to the desired point.
@BeanieBeanTX Жыл бұрын
Finally got one, Hoon! Thank you so much for putting together this video. You’re right-the cleaning and calibrating process is very simple.
@impalist4 жыл бұрын
Thanks for this video Hoon. I wish the Niche's manufacturer had actually detailed these cleaning instructions in their manual.
@HoonsCoffee4 жыл бұрын
Glad it was helpful!
@freakastaire105 ай бұрын
This is the best cleaning guide video fro niche grinder!
@youtubewts4 жыл бұрын
Wow, a fair bit of coffee building up in there. Makes you realise it could probably do with cleaning a bit more often than every 5 months!
@HoonsCoffee4 жыл бұрын
ideally a once month. Thing is there are so easy to clean so it is not a big deal
@HughOBrien Жыл бұрын
Thanks Hoon, way better than their own cleaning guide!
@normhardy Жыл бұрын
Thanks for the great demo. It's all back and working like new, again.
@drooga812 жыл бұрын
excellent video - helped me clean my niche - very clear and well done!
@nomadsolos Жыл бұрын
Hello Hoon - thank you for this video. I am thinking of ordering a Niche Zero. I agree - it seems to be the most bang for the buck.
@cardten4 жыл бұрын
Great video thanks!!! I'm going to buy me one this Christmas!
@HoonsCoffee4 жыл бұрын
Good choice!
@johnnycarrillo11149 ай бұрын
When I took off the top the stem stayed on the bottom burr?? do you recommend using some pliers to pull out the stem?
@SerafimSmig3 жыл бұрын
Hey! Thanks for the video. Is it necessary to screw the nfc disc tightly so it doesn’t rotate freely on its own or it can rotate loosely in the final position?
@rothitamar Жыл бұрын
Is it OK to wash the disassembled parts with water and let them dry before assembly?
@alextube1099 Жыл бұрын
It can go out of calibration if you try to rotate it by the silver top. Once calibrated, I put a piece of tape on the side of the silver dome and marked it with a sharpie.
@MarcesAurelius4 жыл бұрын
definitely want to upgrade to Niche over Breville grinder
@luigiriccardi52183 жыл бұрын
Fantastic , i buy now the niche, i'm so happy. estimated shipping date merch 21. thank you Hoon.
@HoonsCoffee3 жыл бұрын
Fantastic!
@boira31b603 жыл бұрын
Thanks for the video! Very well explained! :)
@HoonsCoffee3 жыл бұрын
Glad it was helpful!
@chavitavb4 жыл бұрын
I can’t wait for mind to get here soon!
@HoonsCoffee4 жыл бұрын
Did you get white or black?
@chavitavb4 жыл бұрын
Hoon's Coffee I got the white version!
@traceyhowe21164 жыл бұрын
Did you receive it yet? How do you like it?
@Kriktang3 жыл бұрын
Thanks a lot for this video! Instructions were very clear :D (unlike the official Niche Zero videos, sigh)
@HoonsCoffee3 жыл бұрын
Glad it helped!
@brandonlord82012 жыл бұрын
Dude thanks for the video !!
@NANA-gy7yx3 жыл бұрын
I did the same calibration steps but it was still way off and chocked my Bianca like crazy. Before I was grinding my coffee on 16 for ristritto. However, after calibration even on 22 Bianca was chocking.
@MrWiseinheart3 жыл бұрын
I noticed that after cleaning mine as well, had to waste 4 portions untill I got it right.
@robb6824 жыл бұрын
Simple and good video, thx alot.
@HoonsCoffee4 жыл бұрын
Glad you liked it!
@traceyhowe21164 жыл бұрын
Hi Hoon, I really enjoy your videos, especially this one on how to clean the Niche. I actually have it on order and it's being delivered in September. Do you notice a different flavor in your shots between your built-in Breville grinder vs the Niche?
@HoonsCoffee4 жыл бұрын
Check out this video. kzfaq.info/get/bejne/jMxlqdKSu57Ufas.html
@jimhand27342 жыл бұрын
Hey Tracey, it's been a year since you should have received your Niche grinder. I ordered one about two months ago and it arrived a few days ago. The first few attempts to pull shots were really bad. I've only been making about two cappuccinos per day so I haven't had a whole lot of time to get it dialed in, but I think I'm getting a lot closer now. The two I made today were pretty good, but not what I would call great. I imagine after a year, yours must be really good. What is your experience with the Niche after a year?
@traceyhowe21162 жыл бұрын
@@jimhand2734 Hi Jim, I am still liking the Niche. It is very consistent with the grind, but have found the settings tend to creep a bit. I still find it difficult to dial in after cleaning, which I do every three months because I use dark roast beans. This is probably me just being dumb, but I love it still as much as the day I bought it. Good luck with yours and I hope we can keep in touch from time to time on your experiences with it.
@jimhand27342 жыл бұрын
@@traceyhowe2116 It keeps getting better with minor adjustments to dosing and grind size.
@sabufinisher2 жыл бұрын
@@jimhand2734 Hey Jim, it's been 6 months since youyou have received your Niche grinder. Just joking :D, btw how is your experience and do you recommend it? i'm thinking of buying one because i've been using a Rancilio Rocky grinder for 7 years it's good but has a massive retention and for 7 years she took great care of me.
@TimRogers814 жыл бұрын
Can’t wait for mine. It ships the middle of July
@HoonsCoffee4 жыл бұрын
What color did you get?
@TimRogers814 жыл бұрын
Hoon's Coffee I ordered the white one. My new expresso machine comes today🤗
@HoonsCoffee4 жыл бұрын
@@TimRogers81 Which espresso did you get?
@TimRogers814 жыл бұрын
My current machine is a Delonghi La Specialista (which is now for sale😉). My new one is the La Marzocco Leina Mini
@Valspartame_Maelstrom4 жыл бұрын
I so desperately want one of these grinders. too poor, tho!
@KitchenKnifeGuy3 жыл бұрын
Just got a Niche Zero. The light under the switch thing is always on, is that normal?
@HoonsCoffee3 жыл бұрын
yes it is. I know some people tape over there.
@VigilanteA777773 жыл бұрын
How often should the Niche be calibrated? What circumstances would require it to be re-calibrated? Thanks
@HoonsCoffee3 жыл бұрын
Not that often. Maybe once every three month.
@terrywn464 жыл бұрын
Hey Hoon. Like your vids, but you neglected to tell all that the Niche is as expensive as the complete Barista Express with built in grinder!!
@HoonsCoffee4 жыл бұрын
You have a great point!
@mikeschneider22513 жыл бұрын
There's a reason for that. It's worth it.
@kevjmu3 жыл бұрын
I just cleaned Niche grinder and I was at 15 now at 22 setting after cleaning. Is this normal? I did calibrate the grinder. Espresso results are 18grams and 35 grams out in 26 seconds.
@HoonsCoffee3 жыл бұрын
It happened to me as well.
@kevjmu3 жыл бұрын
@@HoonsCoffee Thanks for the response and for the video content it helped me clean my Niche grinder. Happy Holidays and Happy New Year!
@MrWiseinheart3 жыл бұрын
I had the same thing happen to me, wasted 4 portions until I got it right.
@julianwuttke95493 жыл бұрын
the reason of change (for me as well) is how tight you have screwed the ring into the bottom, or?
@luckylarrikin14392 жыл бұрын
Camera angle and Focus issues ~ obviously too much coffee consumption.
@chavitavb4 жыл бұрын
Hey Hoon the Niche only has one spring ?
@HoonsCoffee4 жыл бұрын
Should be 2.
@chavitavb4 жыл бұрын
@@HoonsCoffee Thanks Hoon! Turns out I vacuumed one of my springs by accident. Lol
@colinmaynard28793 жыл бұрын
@@chavitavb Niche anticipated this! There are two spare springs stored in the base. 🙂