You don't have to lock it back to disassemble the weapon. You are the only person I have ever seen do that on a Glock.

For all of the grief people have given you for locking the slide to disassemble, your instruction was the only way I could get mine open. I watched a few other videos first and hurt my fingers, my wrist, and my pride. So thanks for this tip.

i see that lots of people have something to say about the way you are cleaning your gun but what works for you its what works for you. same people tell you what guns too get or buy but again what works for you. good video

You might want to check out the Hickok45 video on Glock cleaning. Quite a contrast.

You just taught me how to take apart my piece and clean it. Thanks men!!!

Thank you very much for this video! I am a first time gun owner and wanted to clean it for the first time properly. This helped tremendously!!! Liked!

I remember gopher guts, our cousin taught us the song when we were very young. My mom was horrified😂

Good video for a novice like me. Followed you all the way thru with no trouble.

I just purchased this gun and this was very helpful. Thanks!

Worse cleaning job on a Glock I’ve ever seen. But, like you said over and over again, you’re not sitting there for hours until you get white q-tips. And you’re satisfied and that’s what’s important.

Thanks for making it so simple. Good communicator.

Man straight armor all the gun!!! Just like my tires nice and shiny!!

Interesting to see what the gravy in the works looks like!!

Actually, no, the best way to disassemble a Glock pistol is to simply pull the slide back about 1/8", just enough to release the pressure on the slide lock as you're pulling it down, then the slide will come right off the frame, after you've pulled the trigger of course.

Quick question, I just recently got into firearms and was wondering, is there anywhere in the gun that should NOT be oiled?

Thank you for the video brother.

Do you have to clean the glock 19 gen 4 magazines also?

I can never understand why people take an extremely dirty brush to a dirty firearm to start cleaning it. That's a head scratcher. And never ever clean through the muzzle end.

Great video. First time cleaning im g19g4.

This guy cleans his Glock just as a "Guy next door", in many different points of this video.

Liked and subscribed. I have a question when you just bought glock 19 gen 4 , do you have to clean inside first before first shoot? Or you don’t have to clean brand new gun just clean later.

Thanks for the video. Gopher guts, haven't heard that in awhile lol

Please remember, Glock pistols need very little lubrication if any.

Thank you!

great video thank you so much

Love gun Love Glock

Good job

Thank you my guy

You might want to be careful not to get any oil in the striker channel, on the striker assembly itself and also the plunger. Block recommends to keep these clean, but oil free so that they don't collect dirt which could cause a failure.

The only thing I touch with CLP is the inside of the barrel, Barely touch the edges of the lower were the slide slides. Mabie a drop right above were the serial number is. And every now in then not often I put like a drop were the trigger meets the lower like glock says to do. And then just scrub the rest with a clean dry tooth brush or cleaning prush, wipe dirt out with a gun rag and mabie a Q tip but make sure no cotton gets left in the gun. And then i clean the inside of the barrel but I wipe down everything and make sure everything is dry before I re assemble

Nice example how NOT to clean GLOCK :D

It’s SO BAD if you put too much oil on it. The debris (such as gun powder) will get stuck to the excess oil and can cause your gun to jam. You DEFINITELY SHOULD NOT follow the oiling technique this guy is doing. You should also clean the spring. You don’t really need to oil it but more so brush it to get any powder etc off of it. If you do decide to use oil on it use A LITTLE lol

i understand that read the manual it will give you best info for oiling

I love it bro

Change video name to how not to clean a glock

Don't use this method of cleaning! All that oil is going into the firing pin channel, oil attracts dirt, unburned powder and brass shavings. The debris turn to sludge that WILL slow your firing pin giving you light primer strikes (dud rounds) or it will hang up completely. You should take apart your slide every now and then for maintenance, you wouldn't believe the brass left behind. The better way to clean your slide? Baby wipes, I shit you not. Then a drop of oil on each rail and one on the slide where barrel rests. Clean the barrel first in the sink with hot tap water, dish soap and bore brush. You'll get 90% of the crap out then finish it off with clp and patches.

How not to field strip a glock 19 gen 4. Why you locking the slide?

I think you should read the user manual on cleaning and how much oil to use it says like 3 drops for entire gun is more than enough glocks are ment to run on next to no oil for real read manual you just assaulted that pore gun with oil

That also can help avoid rust

I recommend cleaning the extractor claw and the breach face as well.Both get very dirty, even after 200 rounds.Just my two cents.

Yes we use greasy grim and gopher guts up here in Sudbury - Ontario - Canada. Lol

Where did you buy that cleaning kit

He’s using reverse psychology on how to clean a Glock especially how to take the gun apart he start by locking the slide back pull down the tabs 😂

Wow that’s way more oil than I use on a Glock.

I’m convinced he’s doing everything wrong on purpose

There is no wife, no girlfriend no shared home no kids there is only glock now.

I notice that Winchester and Remington ammo are burn dirty. I have CCI Blazer Brass. I use 9mm caliber

Too much lube for a glock imo. Youre using a lot of product as well.

wrong way with brush through barrel …..it's breach out to muzzle

Way too much lube, Glocks don't require a lot

Dude got 102K views for acting a fool. Good job. Don't clean a pistol like this dude shows.

We say that in Indiana too lol

Your gun is so dirty because its soaked in a bottle of lube, the excess lube creates collection points for dirt and dust. Good video but save some lubricant for the rest of us!

Pretty cool but you know a lot of oil

The myth that too much oil on a Glock causes problems has been busted long ago.Everyone has their own way of cleaning.I say do what you feel the need to do.

What about WD-40?

Hey thanks for the video. First time owner here and it was very informative.

toooooooo muuuuuuchhhhhh oillllllllll! :(

Hahaha no way. Don’t listen to this guy. Lmfao!!!

That some good cleaning

how often should I clean? I shoot 100 rounds per week, or 5,000 rounds per year. Is once a month okay?

My glock don’t fire if it’s dirty

i can lubricate inside the cannon right? and de sprin do not need to lubricate??

Too much oil. Glock recommends the MINIMAL amount of oil. It goes in 4 tiny spots. Too much oil will cause the opposite effect in the terms that it will trap and hold MORE dirt/debris. And if using a solvent/oil mixture, really NOT a good idea to get on a polymer frame. Just saying. No it won't melt the frame, but not good neither. You wouldn't armor all your steering wheel for obvious reasons, same concept for the pistol you need to have a good grip on. Hicock or glock site itself for manufacture specific cleaning instructions. Nice video, but not accurate.

Squeaky Greasy kkk

Wow...doing to much

muy mal la limpia con mucho aceite. much oil error !! 👎

Really? I just put my Glock in the dishwasher. Works pretty good!

Horrible example, p.s. don’t shoot your eye out !

Do not follow any advice on this video. The dude doesn't know what he is doing and should not be handling firearms.