Thank you I was stuck for months on the last part 😅
@BMMEC20095 ай бұрын
Great video. The brushes have soft foam tubes inside them. I took my brushes completely apart by sliding the center rail of each brush out completely. It's a bit hard but they come out. Soaking the brushes in water just traps moisture inside the foam. I have a self emptying charging station and if any water gets into it it will destroy the motor. So once they are completely apart you can let the pieces dry for a few hours and it goes back together and works fine.
@getfitzel171610 ай бұрын
Thank you for your help. Simple and to the point.
@poodleheidi2 жыл бұрын
Terrific video! Easy to follow and exactly what I needed! Thank you.
@timyassa43432 жыл бұрын
Wasn't able to unscrew the side brush. Screw was on there tight! Appreciate the video!!
@icanfixit66502 жыл бұрын
The first screw spin is the hardest try to hold one of the side brush arms and then open the screw and try to do it with flat screw that have the same size of the screw it will be easier
@timhoward75562 жыл бұрын
I recently had to repair one of these. I noticed that the wrap-around front bumper section was full of compacted muck, which was enough to affect the operation of the sensors. Result was the robot hitting furniture hard. The bumper is removed by a number of small screws on the bottom.
@icanfixit66502 жыл бұрын
Thanks for letting us know !!
@amyarahill482929 күн бұрын
Thank you! Great video!
@scottsmith43153 жыл бұрын
Well done. Thank you. I was doing everything except washing the rollers with soapy water. Great tip! Have a great day!
@icanfixit66503 жыл бұрын
I'm very glad to hear, now just keep persisting with thos cleaning methods and your IRobot wont stuck at all. Thanks for watching
@AlmycuАй бұрын
Great! Thanks
@mathewhunt81 Жыл бұрын
another great video! thanks !
@aurelius60003 жыл бұрын
Thank you. If I do half what you did I will have improved as a result of watching.
@icanfixit66503 жыл бұрын
Great to hear thanks for watching!
@ernieforcella79303 жыл бұрын
Great demonstration
@icanfixit66503 жыл бұрын
Thank you for watching
@yb8030 Жыл бұрын
Tnk ❤
@michaelamador83482 жыл бұрын
Excellent Video!
@AH-bm4ts3 жыл бұрын
I just bought from Sam's club on sale $199.98
@fredestair73602 жыл бұрын
I wish I didn’t see your comment cause I just bought it from Sam’s the other day for more $.
@devezencuando9866M.Amuedo2 жыл бұрын
Muy didáctico,súper bien explicado.Gracias
@LunaSimtea2 жыл бұрын
AWESOME VIDEO!! THANKS SO MUCH!!!
@madlenshammas6481Ай бұрын
I got a used I robot from a friend.. I downloaded the i robot app. I just want to ask if it does draw a map of the rooms? Like the roborock vacuum ? Or it doesn't support this option ? How would i know the areas that it cleaned ? Also wn I press the home button , it doesn't go back home .. wts the problem ?
@TechforSenior3 жыл бұрын
Great video... Thanks
@icanfixit66503 жыл бұрын
Thank you for watching
@aurelius60003 жыл бұрын
Would be easier to follow without the music.
@devezencuando9866M.Amuedo2 жыл бұрын
Muy bien explicado.Gracias
@evelynlopez33532 жыл бұрын
I cannot get the 2nd roller in! It doesn’t fit. It’s too long. But it can’t be, right?! I’m pushing the one end, trying to get the other end to simply settle in its place & latch it closes. I didn’t lose any spring, -_-
@geoffreybraden32393 жыл бұрын
Great video. Well done
@icanfixit66503 жыл бұрын
Thank you i'm glad you enjoyed it
@june819173 жыл бұрын
fabulous!!!!thank you!
@icanfixit66503 жыл бұрын
Thank you for watching the video
@MariaCarvalho-bd3pn3 ай бұрын
Pode sêr traduzido em Português? 4:56 4:59
@Consuelo7282 жыл бұрын
I can’t seem to reinstall the second brush. Is there supposed to be a gray plastic cap on the end on the right side. It’s like it’s too long to go back in.
@icanfixit66502 жыл бұрын
yes each one of the main brushes need to have a gray plastic try to make sure this plastic fit till the end and make sure you putting the brush at the right side it wont fit in both sides
@alikoxxx3 жыл бұрын
thanks!
@icanfixit66503 жыл бұрын
Thank you for watching !
@cata16553 жыл бұрын
Thank-you! Very thorough video!
@icanfixit66503 жыл бұрын
Thank you for watching !
@barbarasymonds50472 жыл бұрын
Thanks very helpful!
@fredestair73602 жыл бұрын
How often to you need to replace the filters? Great video ty!
@icanfixit66502 жыл бұрын
Hey bobbi slavin first thanks for watching the video. the Irobot manufacturer recommend to replace to a new filter every 2 months. I have 2 dogs with a lot of fur so I replace the filter every month.
@fredestair73602 жыл бұрын
@@icanfixit6650 thanks for the quick reply. No dogs here, lol. So once a month sounds ok.
@irakmarin49112 жыл бұрын
The filter material allows you to clean it with compressed air, you don't need to replace it as soon.. maybe every 5-6 months.
@fredestair73602 жыл бұрын
@@irakmarin4911 ty
@carolslack70812 жыл бұрын
Where do I set the timer for when I want it to run.
@luzroman71782 жыл бұрын
My Roomba makes alot of noise when its cleaning.
@icanfixit66502 жыл бұрын
Hey thanks for watching make sure you don't have something stuck on your main brush rollers its the number 1 reason for noises around the Irobot.
@icanfixit66503 жыл бұрын
👇 SUBSCRIBE TO ICanFixIt KZfaq CHANNEL NOW 👇 kzfaq.info/love/QAzt1IuH5cTjAXWA04hV3g