How to clean up your soldering iron tip? (The conclusive solution)

No video

How to clean up your soldering iron tip? (The conclusive solution)

Рет қаралды 126,536

Joy of Electronics

Күн бұрын

Пікірлер: 54

@joyofelectronics9782 Жыл бұрын

Dust remover is a highly corrosive compound so, don’t forget to use hand gloves during the process.

@user-gs6ib8ec3i Жыл бұрын

Я не знаю понимаешь ли ты что я пишу, но погружать паяльник категорически запрещено. Та химия что ты используешь окислит всё внутри

@joyofelectronics9782 Жыл бұрын

@@user-gs6ib8ec3i l did understand you but you are mistaken. If you dry it very well there won’t be any problem at all. You can watch the full version of the video on my channel. Also please look at my last video you will see that l used the soldering iron effectively. Thanks for your comment.

@ClaudioFontachannel Жыл бұрын

You don't have to use abrasive things because the tip is coated with a protective layer for increasing the endurance of the tip

@basspoett 9 ай бұрын

Getting a new tip is less expensive than this ..😂

@619Vital Жыл бұрын

Bro that steel pad is going to ruin your tips... Get a brass one, don't even need anything else just fill something with a bunch of it and jam the iron in there while it's hot, Comes out brand new every time and it doesn't scratch the tips

@joyofelectronics9782 Жыл бұрын

Thanks for your advice my fella. Of course it’s a way. But l am pretty sure that there are many people have a steel one, so l wanted to show them a way of cleaning👍

@619Vital Жыл бұрын

@@joyofelectronics9782 Yep, Just saying with some brass pads instead of steel, you can keep your tips for a life time, I find they're easier to clean if you put some fresh solder on it before you jam it in the brass as well, Comes out looking brand new, And after the pads get full of solder you can just take them out and shake the solder loose with your hands and just keep reusing it :)

@joyofelectronics9782 Жыл бұрын

@@619Vital many thanks to your contribution and illuminating, our friends who are going to read your comment probably utilize it. I really appreciate 👍

@MichaelRogersJesusrules 8 ай бұрын

after a year my tips startwed to fail.used brass cleaning thing,nw tips,anyhoww,re tinning is essentizal.or just buy new tips.sadly portable tips ts100 n seq60 arnt as cheep.cheers mate,ill be staying away from forming bad habbits especiially on the broke as F! @@619Vital

@aroundtheglobe9739 Жыл бұрын

Really good solution. Thanks

@joyofelectronics9782 Жыл бұрын

Thanks

@muppetpaster 10 ай бұрын

Seriously? HAHAHA kidding, right? You'll wreck your tip....Ok it works for 5 minutes ....hahaha

@thedancingpipestuffer 8 ай бұрын

Yea... never do this, especially not the steel sponge. Just use the brass sponge and tip tinner/cleaner regularly to always keep it in great shape. If it's gotten as bad this one, either use the same method i mentioned but work it a minute or two till it gets better, or use a sal ammoniac block, which will work even if it's worse than the one in the video. But never use anything that might scratch your tip, it might seem fine, while it's actually slowly eating away the inside of your tip and eventually can't get enough heat to the tip.

@keithgaming452 Ай бұрын

Just used sandpaper to clean soldering iron, am i cooked??!

@user-zc4mm8ik5f Күн бұрын

Pretty much

@user-gs6ib8ec3i Жыл бұрын

🤣🤣🤣🤣 никогда так не делайте

@joyofelectronics9782 Жыл бұрын

No, you can do. I have done and now l am using it very effectively

@changboh 10 ай бұрын

Rust Remover, NOT Dust Remover - This guy does not understand difference between DUST and RUST!!!!@@joyofelectronics9782

@muppetpaster 10 ай бұрын

Most stupid tip EVER.......Using abbrasive stuff to WRECK your tip....Moght work with a nail for a tip like this but not your expensive pro-tip....

@LearnEnglishWithMe34 Жыл бұрын

Excellent 👍 this is the best way l’ve ever seen 🙏

@joyofelectronics9782 Жыл бұрын

Thanks

@mkkrishan6750 Ай бұрын

You can buy a ceramic bit than this...

@kazi_shifan_872 9 ай бұрын

Mine got blast 😢

@changboh 10 ай бұрын

Rust Remover, NOT Dust Remover - This guy does not understand difference between DUST and RUST!!!!

@joyofelectronics9782 10 ай бұрын

😂 you are right. But l know the difference between dust and rust.

@FindStrelok 9 ай бұрын

Ah, I was like, “the hell is dust remover?”

@manuelcardenas5080 Жыл бұрын

Como se llama el líquido

@ahmettay2382 9 ай бұрын

aga napıyon coili daldırdı adam asite KDJDKDKXKDKF

@xConundrumx Жыл бұрын

It works, you probably have to buy a new iron after this and that will come with a clean tip.

@joyofelectronics9782 Жыл бұрын

I used that for a long time after that☺️👍

@LordAnubis0909 Жыл бұрын

So no sand papper only sanding wire😂😂😂😂😂

@joyofelectronics9782 Жыл бұрын

Not exactly. The actual material is dust remover 😉

@surekhameena9449 4 ай бұрын

Nale liquid can damage this

@Shivprasradpatel 7 ай бұрын

Danger 👿

@hayriyeolze3986 Жыл бұрын

👍

@RaokashifRaokashif-gw5rv 4 ай бұрын

Fakes Kuch dar bad phir black ho Jata ha ma na try Kiya ha

@bakebook 11 ай бұрын

I don't understannnddďdddddddddd, my iron oxidizes IMMEDIATELY when it's heated up

@joyofelectronics9782 11 ай бұрын

It’s not oxidizing. Keep use it.

@bakebook 11 ай бұрын

@@joyofelectronics9782 I'm trying so hard :( run it on the sand paper for an houurrrr, looks shinny then turns basically black when the iron gets heat... only thing that's kinda worked is wrapping solder around the head and letting it soak in that way.

@sorgenteinstabile 11 ай бұрын

@@bakebook because you should't absolutely sand a soldering tip, god, you removed the nickel coating long ago, that poor bastard will never work properly anymore

@bakebook 11 ай бұрын

@@sorgenteinstabile aight it's a 50 cent Chinese head, that bastard should of never had a chance to begin with 😝 I've came to the conclusion that I should just tin up new heads as much as I can and don't mess with it after

@muppetpaster 10 ай бұрын

Wet it with solder BEFORE putting away! NEVER put away "clean"

@JeffRenko 2 ай бұрын

Brokie just buy a new soldering station

@shelbyseelbach9568 Жыл бұрын

You're using an abrasive steel pad, how is that any different. Just heat it up, hit it in some sandpaper and re-tin. This is just a waste of time. My method takes about two minutes and most of that is waiting for the iron to heat up. LMFAO.

@Zdarovaallo Жыл бұрын

🤡🤡🤡🤡🤡🤡🤡🤡

@SOCOM3 Жыл бұрын

Sand paper is going to ruin it cuz there is a protective layer in the solder

@shelbyseelbach9568 Жыл бұрын

@@SOCOM3 LMFAO.

@thedancingpipestuffer 8 ай бұрын

@@shelbyseelbach9568you're a moron. Tips are made out of copper because of its high heat conductivity, but flux is corrosive and will eat away the copper pretty quickly, which is why soldering tips are never just copper, they have several layers of plating to protect it from the corroding. Iron, nickel, chrome. Copper also oxidizes ALOT faster, which makes it harder to work with. If you damage the tip plating you'll often get the copper core slowly corroding away on the inside while the tip looks the same but just won't get enough heat to melt the solder, because the tip is literally hollow