How To: CLEANLY BUILD AN FPV DRONE 2022
Рет қаралды 11,464
Күн бұрынIf you liked this tutorial, I accept donations on PayPal:
www.paypal.me/headmazta. If you DO make a donation, please include your KZfaq CHANNEL in your message :) and/or purchase from any amazon link below.
I've been sharing videos on how to do FPV tricks but now, I'm confident to share all of the techniques that I use when building an FPV quadcopter. It's important that your quad is cleanly built, all solder joints are good, wirings are properly installed and configured, etc. All of the tips that I can give to you are in this video.
PS: I've added subtitles that you can translate to your own native language. I hope this helps when reading the instructions and especially the tips.
Thank you for watching!
Special Thanks to my Patrons!!! 💜💜💜
PeculiarHumanBiped
/ @peculiarhumanbiped
Rob S. Patrick
/ @robs.patrick9691
Dominic T
Eric Perez
Matix
Tillmann Huebner
Chemtrail Pilot
Krunoslav Husak (Kruno FPV)
/ channel
Bon Jun Cuevas
/ bonjuncuevas
Radek_R
L0stB1t FPV
/ @l0stb1t
Majed Aljaber
AnugrahPrahasta (SquadDrone)
/ anugrahprahasta
Vitor Moreira
Joel Guilbault
Marty Waszak
------------------------------------
Special Thanks to Sponsors 💜💜💜
Gemfanhobby
www.gemfanhobby.com/
T-Motor
store.tmotor.com/
DQuad USA
www.dquad.net/
Gaoneng
www.gaoneng.shop/?referral_co...
SpeedyBee
www.speedybee.com/
00:00 - Components to be used
02:45 - Tools that we'll be needing
03:20 - Prepare the frame
03:39 - Installing the motors
5:14 - Wiring the ESC and motors
8:42 - Preparing and connecting the XT-60 Pigtail
12:13 - Installing a capacitor
15:31 - Soldering the camera wires to the Flight Controller
17:19 - Installing and wiring the Video Transmitter (VTX) to the Flight Controller
22:33 - Installing the Flight Controller
23:17 - Wiring the Receiver (RX)
25:19 - Wiring the Buzzer
29:04 - Mounting the RX Antenna
32:30 - Attaching the FPV Camera
34:02 - Connecting the ESC to the FC
35:36 - Mounting the VTX Antenna
36:57 - Testing for Continuity
37:31 - Binding the RX to the Transmitter/Module
38:48 - Betaflight Configuration
42:10 - BLHeli32 Configuration
42:56 - Finishing up the build
43:18 - Adding a TPU Mount for the HD Cam
43:59 - GoPro settings
45:15 - Placing the propellers
46:56 - Build Done!
47:43 - Test Flight
49:07 - Thank you, my beloved Sponsors!!!
49:20 - Thank you, my few remaining Patrons!!!
FREESTYLE QUAD
____________________________________________________________
Frame: DQuad prototype
VTX: amzn.to/3OZOZLP
FPV Camera: amzn.to/3hYHNyO
Antenna: www.speedybee.com/2pcs-speedy...
Frame: amzn.to/3mJnedo
RX: amzn.to/360cSzG
Flight Controller: store.tmotor.com/goods.php?id...
Motors: amzn.to/3JexOoq
Propellers: amzn.to/3Bsb9D7
LiPo Battery: www.gaoneng.shop/?referral_co...
HD Camera: amzn.to/3hW9BUD
RADIO GEAR
____________________________________________________________
Radio Controller: amzn.to/2RMyOWW
TX Module: amzn.to/2RRgVGs
VIDEO SYSTEM
____________________________________________________________
FPV Goggles: amzn.to/35VJLhb
VRX Module: amzn.to/3cp2l2m
Antenna 1: farvew.com/pagoda-omni/36-pag...
Antenna 2: farvew.com/home/69-triple-fee...
Long Range: www.team-blacksheep.com/produ...
WISHLIST
____________________________________________________________
FPV Goggles: amzn.to/38gQNNX
Air Unit: amzn.to/3kRCu7m
EDITING
____________________________________________________________
Computer: amzn.to/300DA7G
SOCIAL
____________________________________________________________
Instagram: / headmaztafpv
Facebook: / headmaztafpv
KZfaq: / headmazta
fpv trick tutorial
fpv how to build a drone
how to build an fpv drone
how to build an fpv quadcopter
how to build a drone
#fpvtutorial #fpv #fpvfreestyle #gopro #goprohero6 #fpv #cinematic #fpvcinematic #goprooftheday #drone #unitedbydrone #droneoftheday #teamblacksheep #dronegram #fpvlife #gemfanhobby #gemfan
@Johow 2 жыл бұрын
Love your Videos, man. My comment about your soldering: when you solder the wires into the XT60 you should definitely give it a bit more time to completely heat through and let the wire sink fully in, to make good and solid contact. It is not good to cover up everything with a couple of blobs of solder. Just give it heat, let it all melt and let the wire „swim“ into the pole. One other thing: when you tin your XT60 wires: don’t place them vertically on your workbench. The solder will flow down the wires due to gravity inside the insulation and stiffen up your wires. It may become hard to bend or put them in place later.
@DroneAcharya9 2 жыл бұрын
I was literally going to say that.. Also, its better to always use the male/female counterpart of the XT60 plugged in so that the inner pins dont move
@headmazta Жыл бұрын
Sorry, I skipped the footage because it looked so boring lol, but I'm not just covering the wire with tin. Although I'm moving the soldering iron left and right, I'm not pulling it away and still in contact with the lead so it's still heating the entire thing down to the pads. But yeah I forgot to mention it.
@Johow Жыл бұрын
@@DroneAcharya9 also a good idea. But the bigger metal surface area(created by the extra set of female/male pins) pulls away a lot of heat. I made a little jig to hold the plug while soldering.
@Mawragfpv 2 жыл бұрын
I didn't know that only the signal and ground camera wires should be twisted, I always twisted them all. I guess we never really stop learning new things in this hobby, Thank you! Got allot of useful tips and information from this that I'm going to use on future builds :D
@headmazta Жыл бұрын
Glad to give new info bro 💜
@xnoux1 2 жыл бұрын
Really clean, I didn’t see a smokestopper though, unless I missed that :) Would definitely recommend to someone new to the hobby!
@headmazta 2 жыл бұрын
Yes, absolutely. But honestly, a smoke stopper trips when you have too much current so you'll have to disconnect LEDs and VTX etc. when using it so I don't use it anymore. It's better to just triple check the diagrams and your wires, and make sure that there's not a single solder bridge between any pads.
@BigJ_FPV Жыл бұрын
Make sure to melt all of the solder on the lead at the same time. If you do it only parts at a time, then it will result in a cold solder joint, which is bad. Great build btw. Keep it up👍
@opossumfpv 2 жыл бұрын
Great video idea bro
@antoniomarroquin3649 Жыл бұрын
Awesome man , super clean the way your build Came out . Thanks for the video
@DrFrantic77 Жыл бұрын
Nice dude
@vladimircerovic 2 жыл бұрын
Fantastic high quality tutorial and I picked to many useful tips! Thank you, Headmazta!
@headmazta Жыл бұрын
Glad it was helpful!
@jinxfpv6637 2 жыл бұрын
DQUAD ALL DAY BAYBAY
@headmazta Жыл бұрын
💜💜💜
@royvic9983 2 жыл бұрын
Thank you so much for making this video, I am learning to built the FPV
@headmazta Жыл бұрын
Good luck!
@ApXFPV 2 жыл бұрын
As always, perfect video )
@hprompt166 2 жыл бұрын
Great Build video
@jeffclassics 2 жыл бұрын
Pristine parts from Tmotor, clean build indeed. I like it that all wires are cut to the exact length so they don't dangle. red wire not wrapped around is new to me and it totally makes sense to twist only the ground wire to the vtx video or tx/rx.
@headmazta Жыл бұрын
Yes bro, learned twisting signal and ground wires from another video. It's that or use a coax cable.
@AcruxFPV 2 жыл бұрын
Many thanks for sharing your build process! It can be very daunting for new FPV hobbyists. You made the procedure very straight-forward and clinical, as you do so well. 🙏❤ Those motors look very nice btw!
@headmazta Жыл бұрын
Thanks a lot!
@LeVynss 2 жыл бұрын
Quality video with a lot of efforts ! Really clean and easy to understand ! I will probably come back to this one for my first build !
@headmazta 2 жыл бұрын
Thanks so much bro!!
@gprov590 2 жыл бұрын
idol talaga to
@josefdahari 2 жыл бұрын
Superb work always brother for real. I love it !!🏆🏆🏆
@headmazta Жыл бұрын
Much appreciated my bro!!
@kelsey7k 2 жыл бұрын
No Talking Quad Build (great build vid!)
@headmazta Жыл бұрын
Ahaha yes bro. Wait how did you put that emoji?
@kelsey7k Жыл бұрын
@@headmazta lol it's called (colon)elbowcough(colon), but we all know he's dabbing. what a time to be alive hahaha
@Shauny_D 2 жыл бұрын
Nice clean build!
@headmazta Жыл бұрын
Thanks bro!1
@jofagoma 2 жыл бұрын
You forgot to update blheli, super important
@maninhodrones1972 7 ай бұрын
Me desculpa fazer esta observação mas o fio branco da camera liga no Vbat e não no CC. Parabens pela montagem, ficou muito bom.
@nardobejas1838 2 жыл бұрын
master...😁😁😁
@headmazta 2 жыл бұрын
Thanks brother!! 💜
@austinspired 2 жыл бұрын
still freestyling analog? I just moved to digital myself. we fly the same motors and stack I just run 2080kv.
@headmazta Жыл бұрын
Yeah lol. Sometimes I fly my friends' digital cinewhoops.
@DroneAcharya9 2 жыл бұрын
I would say you should use higher temps for shorter durations, rather than lower temps for longer periods.. So instead of 400, you probably should use 430 or 440 and that will give you better joints.. the trick is to be quick in and out..
@BowOneFire Жыл бұрын
most fpv people say to twist all the wires though
@Mrfuckplayer 2 жыл бұрын
man, it was very good, only one point that catches my attention is where the capacitor is. I wouldn't do that in my build. I would try to use something as a stand or solder directly to the lipo pad. Another point is the RX, it could have put a heat shrink and used a tpu support for it and the antenna. Other than that, your assembly was very good, congratulations
@headmazta Жыл бұрын
Thanks bro! It was a tight build, can't put the cap there. And the RX, i'm done putting them in heat shrinks, hard to maintain.
@Dan-he3kl Жыл бұрын
Nice. Acro trainer angle # 20 Function??
@rodriguezperalta3212 Жыл бұрын
please include prices of the parts you get in your home country. if not interested in doing that, can you tell the total price.
@tycoontrading9352 Жыл бұрын
Can you build the drone with HD unit (not analog) like DJI 03?
@eprohoda 2 жыл бұрын
Thanks.interesting . talk you laterb.uddy, 🤘
@irwane1817 2 жыл бұрын
Goodbye to FlightOne? Lol...i am also now using Betaflight
@headmazta Жыл бұрын
Nope, bought a FalcoX license for this a few days after.
@MRdeLaat 2 жыл бұрын
nice FC i have a few of those, i dont like the holes in the pads i messed up a verry good and new esc from dripping solder through that hole
@headmazta Жыл бұрын
Yeah actually
@baptiste_nonat 2 жыл бұрын
Don’t see the point of soldering onto the speedy bee vtx as it has a very useful plug that you can solder to the fc and in case you need to change vtx because you burnt the previous one, it’s a lot easier. However, great video, very neat and useful for beginners.
@headmazta 2 жыл бұрын
Thanks bro. Hmm highly unlikely to burn a VTX and it's very important to not have a loose connection after repeated crashing.
@baptiste_nonat 2 жыл бұрын
@@headmazta understandable BUT I use speedy bee vtx and I crashed a month ago in a field, my antenna unscrewed a bit from the sma connector and my vtx burnt by being 25 min in the field while I was searching for it. Then the replacement was extremely easy as y just had to unplug the pigtail and the connector and the problem was solved. Both options are good !
@erickoshinsky9374 2 жыл бұрын
nice build. I'm wondering why you didn't / don't put nuts on the top of the stack screws (after FC)? No problems with it coming off the stack from vibration or crashes? I'm also wondering why you recommend only using Raceband for VTX. Thanks
@headmazta Жыл бұрын
Oh, FlightOne recommends to mount the FC without nylon screws on top so it's been. I don't know what Befaflight devs say about that but I have replaced my firmware with FalcoX anyway. It's been the standard, especially when you're flying with your friends, it's easier to choose a channel. Allows up to 8 persons to fly at the same time.
@blackmaria929 2 жыл бұрын
What AWG size wire can use for capacitor ?
@headmazta Жыл бұрын
Same as the motor wires :)
@BigJ_FPV Жыл бұрын
5:44 - does anyone know what the purpose of covering the up at he cooling fins is? To me it seems like that would be a bad thing. I’ve very new so spry if that is a dumb question.
@headmazta Жыл бұрын
Just covering the gaps temporarily to avoid lead going into it.
@AnugrahPrahasta 2 жыл бұрын
brooo... that frame... wowww
@headmazta 2 жыл бұрын
Yes bro! Wait until the final version is out, it's gonna be awesome 💜💜💜
@AnugrahPrahasta 2 жыл бұрын
@@headmazta alrighttt
@no-wing7229 2 жыл бұрын
Paps t motor f55 pro II 32 bit Tapos Wild Willy's Special Juice 2306 Motor V2 2700kv Tapos 1000uf 50v cap.. 6s pero maganda din siyang 4s..
@LumpyFPV 2 жыл бұрын
That was fantastic, thanks for the content my dude! Also fun to see your full setup. 🤌🏻🤌🏻🔥🔥🔥🔥
@headmazta Жыл бұрын
Thanks brother! Please note that i'm using FalcoX for this build now :D
@reindeermosseater 2 жыл бұрын
simplest way to remove insulation from silicon wires - yiur nails.
@headmazta 2 жыл бұрын
It's harder to achieve the desired length of the exposed wire accurately so I choose the knife :)
@Tonynux Жыл бұрын
Why your Feed Forward Jitter Reduction is set to 12 ? This in not in the Supafly preset.
@headmazta Жыл бұрын
Maybe it's updated, not sure tho
@dvillamil01 Жыл бұрын
Wow. degree gorpro? Link TPU please!
@headmazta Жыл бұрын
www.thingiverse.com/thing:3955278, 25 deg :)
@jazpion Жыл бұрын
This frame no longer exists, which one do you recommend?
@headmazta Жыл бұрын
It's not yet out, actually. For now I would recommend the LRX
@lyzlapstory3132 Жыл бұрын
Saan na kakabili Ng mga parts Ng FPV?
@headmazta Жыл бұрын
PinoyFPV :)
@RedXFpv 2 жыл бұрын
mm yummy kwad
@headmazta 2 жыл бұрын
Thanks bro!
@marliehyrum8221 Жыл бұрын
𝓟Ř𝔬𝓂𝔬𝐒ϻ 😥
@TeamBeasty2147 2 жыл бұрын
bro make me a new drone please message me
@headmazta 2 жыл бұрын
No prob master!!
@TeamBeasty2147 2 жыл бұрын
@@headmazta bro alam mo pa number ko ?
@headmazta 2 жыл бұрын
@@TeamBeasty2147 Ay hindi bro eh, nag pm ako sa fb at ig bro. Not sure if active yun 🤔
Kentucky Ballistics
Рет қаралды 916 М.
Bacon Ninja FPV
Рет қаралды 13 М.