HOW TO COAT CORNER BEAD (hawk and trowel)

  Рет қаралды 2,010,660

Vancouver Carpenter

Vancouver Carpenter

5 жыл бұрын

This video is full of tips on how to get nice full cornerbeads with a hawk and trowel.
Instagram @vancouver_carpenter
Tools I use often:
DISCLAIMER: As an Amazon Associate I make a small commission from purchases through these links. Thank you for the support!!!!
Drywall knives:
2" amzn.to/2LwX8ty
4" amzn.to/32OHlw3
6" amzn.to/2LwP1x5
10" amzn.to/2QbLbOp (This one will rust if you leave it wet but feels nice to use)
10" amzn.to/3056fcU (This one is stainless. Stiffer, more expensive but won't rust)
Mud Pan with Grip!! (This is the BOMB! You will thank me!)
amzn.to/31tQauH
Tin Snips GOOD QUALITY!! amzn.to/2LzlOBv
Drywall Tape Holder!! amzn.to/32Udhzd
Paint Mixer for mud!! amzn.to/303fX0q
Full size mixer!! amzn.to/2LYrMLe
Mixing Drill (just in case)!! amzn.to/2O2oQ2P
Hawk and Trowels
13 inch hawk:
amzn.to/2ZWZXw2
13 inch trowels:
amzn.to/30aJPTB
amzn.to/2ZWH39d
amzn.to/2ZSY5Fj
12 inch trowels:
amzn.to/2Q5fGW4
amzn.to/2ZYKXxu
14 inch trowels:
amzn.to/34JeydR
amzn.to/34CdmsJ
Auto tools
If you don't want to think, here is the whole kit (Columbia is great quality too!) amzn.to/2UwPUae
Mud tubes and applicator:
amzn.to/2Xt65XR (different but works great, I have this one too)
amzn.to/2DBs1sz
amzn.to/2Vdy8x7
Flushers
amzn.to/2Dqa0x8
amzn.to/2GyDBGy
amzn.to/2Ix1Reo
Handle adjustable
amzn.to/2XuGP3x
amzn.to/2Xy5ILU
or fixed handle amzn.to/2DrNt2O
Corner roller (head only, you may need another handle)
amzn.to/2XpuJZo (cheaper)
amzn.to/2XpuNZ8 (better quality)

Пікірлер: 726
@jessewilliams5562
@jessewilliams5562 2 жыл бұрын
I took on mudding our entire home, (after all new drywall), and I had zero experience in anything renovation. Your excellent videos has not only made it possible for me to do the job myself; I am already only leaving mistakes that would take the close eye of a pro to completely dime me out on. Thank you very much!!!
@Tigerratcat
@Tigerratcat Жыл бұрын
It’s so much harder than it looks. Especially hand tool control
@maxmotors9497
@maxmotors9497 Жыл бұрын
@@Tigerratcattakes years to master the feel of any hand tooling. DIYers can get close but only experience brings that kind of finesse.
@rufiorufioo
@rufiorufioo 3 ай бұрын
@@Tigerratcat Yeah it's more difficult that it looks for sure but I do a little better because I'm a concrete finisher. The trowel experience is a great thing for mudding!
@nailbanger2
@nailbanger2 26 күн бұрын
Jesse Williams, you're giving us a hint about your age with that dime comment. IF there were still pay phones, they would probably be a buck now. LOL
@vadalippman9455
@vadalippman9455 4 жыл бұрын
You’re real time “mistakes” are my favorite; not only do you demonstrate what to do when unexpected things happen, you handle these situations with such grace and fully explain why it happened and how easy it is to fix it.
@bradbrown9722
@bradbrown9722 4 жыл бұрын
He makes this look so easy! I’ve finished drywall many times. It’s definitely an art to “cut” the inside and outside corners in properly. Anyone can slop It on ( but make the sanding a total nightmare). This guy is very good.
@systemshock869
@systemshock869 5 жыл бұрын
Never thought I would be sitting by myself in the dark geeking out on drywall videos. I can do repairs alright but drywall is one skill that I have never been able to do on a professional, new-construction level. Watching these has put me lightyears ahead of where I was. Thanks man!
@canuckfan1745
@canuckfan1745 5 жыл бұрын
Thats exactly what im doing right now lol
@jessewilliams5562
@jessewilliams5562 2 жыл бұрын
I think it’s like auto body work. The guys who do it everyday just have that feel. Can’t read or watch about it. Just gotta do it
@dino0228
@dino0228 Жыл бұрын
I love it when the demonstrator shows why something should not be done in an incorrect way. Seeing the result leaves quite an impact!
@MrMander87
@MrMander87 5 жыл бұрын
As a painter, I really appreciate a 'flat' corner versus them being done concave or convex. Great workmanship!
@dwightschrute706
@dwightschrute706 2 жыл бұрын
Thank you so much for taking the time explaining the full process . I recently bought an old home , and after trying desperately to find someone to do the drywall with no success I ended up doing it myself . Watching your videos have helped me tremendously 🙏
@kjaubrey4816
@kjaubrey4816 3 жыл бұрын
I have been finishing drywall since I was a kid. I do not specialize in drywall, but when doing plumbing, electrical and remodels, drywall is always a necessity. Even with all my experience, I still learn tricks from your videos.
@andrewkennard2301
@andrewkennard2301 5 жыл бұрын
Awesome videos! Im an amateur that dry walled my entire house and have applied mud to most of it. Your videos have helped me greatly! Thank you and nicely done!
@eroc1684
@eroc1684 4 жыл бұрын
Crazy, did residential drywall for 10 years. All track homes, first time I’ve ever seen these types of tools being used to run metal. Great job on your demonstration....
@baozhongmeng824
@baozhongmeng824 4 жыл бұрын
It stands out that this young Vancouver carpenter is a perfectionist. Great skills, highest standard with his work. Way to go, young man!
@chrisj197438
@chrisj197438 5 жыл бұрын
When I started finishing I learned from some old timers and got really good with a hawk and trowel. I still have my trowel one of the guys gave me when he retired. If you are good with it you can do it a lot faster than a pan and knife and with better results.
@laughingkars889
@laughingkars889 4 жыл бұрын
A double butted trowel would probably help to get a better finish & always go plain steel, not stainless as it keeps a sharper edge. Less sanding down after.
@user-bg4ob1db4j
@user-bg4ob1db4j 4 жыл бұрын
I’m glad I found this instructor before I start taping. I’ve never ever done this in my life. So it’s really helpful.
@rosswiddison6699
@rosswiddison6699 5 жыл бұрын
I have been trying to learn how to good drywall, who would have thought I would find the best teacher was a bloody carpenter. Thanks mate, you are an artist and natural teacher. Learning about paper corner beads has been an eye opener. Thanks mate, from Oz
@TaxPayingContributor
@TaxPayingContributor 5 жыл бұрын
Binge watching these knowledge filled videos! Lots of tips and clean work!
@danielfox3276
@danielfox3276 5 жыл бұрын
I think its really cool that you take the time to show people how to approach a difficult job to those who dont know plastering,clear step by step instructions,well done my friend.
@diggler306
@diggler306 5 жыл бұрын
I appreciate your honest approach to doing these videos! You make that technique of lifting off without messing the corner (near the end of the video) look easier than it is! Nice work. Looking forward to more videos.
@robertfrey3607
@robertfrey3607 4 жыл бұрын
I always use Durabond on my corners for the first pass, especially with full metal bead. It takes the beating that door openings always seem to get. Great job.
@kaloncar
@kaloncar 4 жыл бұрын
Thanks for the Durabond tip.
@ritcheymt
@ritcheymt 4 жыл бұрын
What a great video. I really appreciate the details on feathering the horizontal joint that is perpendicular to the vertical corner. Really useful technique!
@TheMrDimitri
@TheMrDimitri 4 жыл бұрын
Got a hitchhiker here! That’s hilarious! You’re an excellent instructor! I wish I would’ve watched this video before I started taping the corner bead at my house!
@zayneali3148
@zayneali3148 4 жыл бұрын
I laughed out loud at work lol
@OldJoe212
@OldJoe212 5 жыл бұрын
2 fer 1... Cornerbead with a bonus taping. Thanks for sharing your knowledge.
@j-net7395
@j-net7395 3 жыл бұрын
I relied solely on your videos for our massive kitchen remodel in 2020, and I’ve found myself referring back to even more of your content this year while finishing our ENTIRE basement. I cannot tell you how grateful I am for all of the amazing content you have put out there. THANK YOU!!!
@williamferguson7234
@williamferguson7234 3 жыл бұрын
This guy is a joke. He is a "short cut" artist.
@brendanmulhall
@brendanmulhall 4 жыл бұрын
I always load both sides at the same time in case I do have any globs that spill over onto the other side (and I usually do!) That way I'm making both final passes at the same time and can clean up my mess. I never knew about the arc tho! Thanks for another great video man!
@alwaysrockn2009
@alwaysrockn2009 3 жыл бұрын
Dang dude, you’re a total pro. You make everything look fun and easy. Rock on!
@ATXTube
@ATXTube 5 жыл бұрын
Bro, even your "mistakes" are educational. Thank you for all you do my man 👍
@Cheez1979
@Cheez1979 4 жыл бұрын
ATXTube he’s badass
@edcrnj
@edcrnj 4 жыл бұрын
That's what I was thinking 🔥🔥🔥
@garychandler4296
@garychandler4296 3 жыл бұрын
Without which it would not be as instructional! Eggzellent!
@johnamodeo4565
@johnamodeo4565 4 жыл бұрын
Thank you so much for your kind showcase on how to do this. Following your lead, I'm about to do this for the very first time as a do-it-yourself amateur. Thanks again.
@mirogak
@mirogak 5 жыл бұрын
Very helpful. And you are a master sir. I always struggled with this part of drywalling for small diy jobs around the house. . No more. Hopefully.
@kaloncar
@kaloncar 4 жыл бұрын
You just helped me a great deal! I am attempting to repair old corner bead that is not properly filled and I love the look of using the trowel. I look forward to more of you carpentry videos but need the dry wall help the most now. Perfect timing for me. Thank you!!
@kaloncar
@kaloncar 4 жыл бұрын
I agree fully.
@drawsawyer5881
@drawsawyer5881 4 жыл бұрын
I watch this and think I will head to my basement and it will go just as smooth. I walk to my basement, look around, and ask myself who I am kidding! You make it look so easy man! Thanks for the videos
@AtEboli
@AtEboli 3 жыл бұрын
Thank you for sharing your knowledge. Watching your videos are very therapeutic, in the way that finding solutions to problems that have long vexed you can be. As a 30 year painter who at times does drywall repair, I've learned so much from your videos that I wished I had known 25 years ago. Well, better late than never! Keep up the great work.
@zyeadothman2781
@zyeadothman2781 2 жыл бұрын
kzfaq.info/get/bejne/nbuHdpB0r77UdZ8.html
@aussielids2828
@aussielids2828 4 жыл бұрын
Thanks for the videos Ben, they have been so helpful and inspiring. I've learnt so much, Great work!
@mxfern854
@mxfern854 5 жыл бұрын
very much appreciated your videos; great visual quality, good voice and the right speed of teaching. I have learned a lot watching your videos.
@orlandomartinez9119
@orlandomartinez9119 2 жыл бұрын
I wanna go to Canada like a drywaller and it could be posible because of you. Now i'm asking a job in my country to practice before it happen. Thank you so much for sharing your knowledge.
@robert615-HB
@robert615-HB 4 жыл бұрын
Finally see a drywaller thinking about the trim man shoot need more fellas like u.
@chrisbowring4298
@chrisbowring4298 4 жыл бұрын
Thank you Sir for the education and the opportunity to watch the smooth execution of a genuine professional. 👍
@daytripperhd
@daytripperhd 2 жыл бұрын
So much more difficult than you make it look. You sir are an artist.
@SeemsFutileNow
@SeemsFutileNow 4 жыл бұрын
My career as a Painter hasn't paid off the past decade, but I always do it right. I applaud you for taping after the fact. That's what makes Master's of their Skill
@reddawgrup1779
@reddawgrup1779 5 жыл бұрын
Conscience got the best of you 😲..... Say it ain't so... Lol. Great stuff to hear!!!! And now I don't feel so lonely. So many ppl say... "oh that's good enough" or when they know better but yet leave it. My conscience kicks my butt everytime and I just can't leave it. So it was refreshing to hear!! 👍👍👍👍 Also wish more tapers would consider the carpenter.. I've been a carpenter for 35 years and things are to the point nowadays where I have to clean 3 out of 4 inside corners when running base and hanging doors has become a nightmare also due to the taper cleaning his trowel off in the door opening or running the horizontal tape long and folding over into the door opening. Ughhhhhhhh next thing you know that half inch you have to shim a door plumb is now an 1/8" or less. Or they let the drywall hang into the door rough opening. Good grief. But alas... Your a carpenter too so you know about what things can hassle the carpenter thus you don't do it to those extents.. Lol. Nice video and I'm subscribed. Thanks for the upload. Again... 👍👍
@johnkruton9708
@johnkruton9708 3 жыл бұрын
Being the remodeler du jour, I yell at myself in the mirror about the “a-hole drywaller” as the trim installer guy, You should see the shouting matches between the designer and the contractor!! Keep up the great work. I’ve been able to use your tips albeit taking hours to get something down that you do in 1 second.
@teh60
@teh60 5 жыл бұрын
Your videos are always interesting. Nice job Ben.
@dkaloupis75
@dkaloupis75 4 жыл бұрын
The best detailed explanations ever been made....congratulations!
@samanthamccormick7865
@samanthamccormick7865 2 жыл бұрын
I'm currently finishing a small room in our house with lots of weird jut outs and outside corners. I would love to see another video on finishing a corner bead, especially seeing more of the texture that you're happy with. I find it extremely hard to get a perfectly smooth finish on the first coat. The more I try to finesse it, the more I mess it up. What is fixable once dry (can be scraped off or filled with second or third coats), and what do you want to fix while it's wet. Thanks
@tylergalaska5135
@tylergalaska5135 10 ай бұрын
Thanks for showing your fix and your conscience getting the best of you. Showing simple mistakes like this helps us learn more instead of editing it to make you look perfect. Much appreciated!
@papitlin135
@papitlin135 2 жыл бұрын
It is good when you see a professional doing an excellent job and not pretending to be what you are not. Great video down to the point.
@eyedrcarlson
@eyedrcarlson 5 жыл бұрын
@4:30 As proficient(fast/quick etc) as you are, I didn't think you could let the joint go as is (with no tape). Bravo!
@Nightman2152
@Nightman2152 5 жыл бұрын
That was a sweet move where you used the front of the trowel upside down to scoop the booger off the bead. I usually let those dry and knock them off later. Once I get a corner looking good I don't have the balls to touch it until it's dry.
@timc8913
@timc8913 5 жыл бұрын
Very nice. Thanks for sharing. I'm just your average homeowner and did some closet work last weekend with a corner. Wish I had seen your video and tips before hand as it would have made my job a lot easier!
@g2restore963
@g2restore963 4 жыл бұрын
Damn!!! A true pro!!!!! I’m Doing this right now and nowhere near as good!!! Lol thanks for the tip!!! Awesome!!!
@K6TJO
@K6TJO 5 жыл бұрын
Perfect introduction! Short and to the point!
@andresjc502
@andresjc502 4 жыл бұрын
I do this job , this guy really knows what he’s doing so learn from him people 🔥
@kevinwebb1224
@kevinwebb1224 4 жыл бұрын
Oooooo ok lol mo ok o pop o Koo oplomooookooo
@petebeat1510
@petebeat1510 3 жыл бұрын
Make up and plastering are too different things mate
@MadsWorld34
@MadsWorld34 3 жыл бұрын
i myself am glad you making so many drywall videos. i am doing my first sheetrock ever. and i watched a lot of videos and i started in my bathroom because most of it will be covered anyway and it looked BAD. i tried to fix it and it came out worse. then i found your videos and you go into details of what you do and why you do it this or that way. and now my house is coming along great. even that one bath room is looking good. so THANKS for your videos
@JM-md7qf
@JM-md7qf 5 жыл бұрын
All your videos are so informative! Great instructions and very thorough!
@kevinsolon4981
@kevinsolon4981 3 жыл бұрын
You are the best! Thank you for your educational videos. I'm just a guy renovating my house in preparation to sell it, and your videos have made me truly enjoy the challenge of achieving your type of results - I'm very pleased with my improvement, thanks to you. I just skimmed my first ceiling using the trowel and hawk (as opposed to 12 in blade and massive sanding, just shoot me) and WOW what a difference your example has made! By they way, you're handsome and articulate and you should consider acting. You'd be a great Bond.
@ianmackenzie686
@ianmackenzie686 3 жыл бұрын
Excellent education. Though I loathe doing drywall, your videos make this jobs more bearable for me. Thanks!
@joreldeleon8848
@joreldeleon8848 5 жыл бұрын
You sir are a spectacular teacher. Thanks for your help!
@alleyecn699
@alleyecn699 2 жыл бұрын
Awesome content bro like the short and to the point videos, no music no filler just what we need to get it done thanks!
@simplyluxuryimports
@simplyluxuryimports 4 жыл бұрын
Great videos. I like when you show what happens when it's done wrong and how correct it which is what is diy guys are dealing with
@jeffthewhiff
@jeffthewhiff 5 жыл бұрын
Very interesting video on applying mud to a corner bead, Ben. You make it look so easy!
@michaelvivirito1224
@michaelvivirito1224 2 жыл бұрын
Thank you sir! My hand skills have increased greatly with you tutorials. You are a great teacher.
@JustRay627
@JustRay627 5 жыл бұрын
I can watch these all day, you make it look so easy!
@richardcale9892
@richardcale9892 4 жыл бұрын
Superb vid - you’re my go to for all drywalling advice.
@patrickodonnell9770
@patrickodonnell9770 5 жыл бұрын
I like to use a 50/50 mud primer mix on painted walls first with a roller.stops the mud sliding around and reduces fisheyes a bit(also dish liquid in the mud helps) and i put a couple handfuls of confill in the mud when loading corners reduces shrinking and is stronger.just a couple little things i do. Really like your videos you know your stuff man.From an Irishman working in the bow valley and calgary.
@FreeFrogWatching
@FreeFrogWatching 3 жыл бұрын
you're really into details and did a wonderful job. Thank you for the video
@JanetJenkins
@JanetJenkins 3 жыл бұрын
You are a rock star, you helped me fix my powder room. Now I find watching you relaxing! haha
@johngnipper1454
@johngnipper1454 5 жыл бұрын
The best carpentry videos out there, i remodeled my house using your techniques, came out great.. Thanks
@mistysedillo8954
@mistysedillo8954 5 жыл бұрын
I'm going to tackle corners tomorrow, so glad I watched!
@heymanmotorsports49
@heymanmotorsports49 3 жыл бұрын
Thanks SO much Really got in over my head in my bathroom remodel. I have Referenced a lot of your videos and have helped me save the day and even become to enjoy it quite a bit
@robd4914
@robd4914 2 жыл бұрын
I'm pretty much addicted to your videos. So GOOD. Thanks for keeping it so simple and efficient.
@leestar7156
@leestar7156 5 жыл бұрын
Natural teacher, great videos and keep grinding.
@tj.rodriguez1400
@tj.rodriguez1400 2 жыл бұрын
I LOVE THE WAY YOU ACTUALLY SHOW, WHAT HAPPENS WHEN YOU DO IT THE WRONG WAY ! AND THEN YOU MAKE IT LOOK SO MUCH EASIER ! I LIKE ALL YOUR VIDEOS , AND ALL THE FUNNY PARTS, A LOT ! YOU TEACH AND SHOW, RIGHT FROM WRONG ! AND WITH SOME JOKE'SALSO ! HAHAHA !! I LOVE IT BUDDY ! THANK YOU FOR SHARRING THESE WEEL DONE VIDEOS , STEP BY STEP ! I'VE SEEN SOME OTHER PEOPLE VIDEOS, BUT YOUR'S ARE 110% WAYYYY, MUCH BETTER ! SO KEEP ON TEAHING US YOUR EXPERTICE ON HOW TO DO DRYWALL WALL THE RIGHT WAY ! THANK YOU !
@clarksimmerman5968
@clarksimmerman5968 4 жыл бұрын
You have a way of explaining that is easy to understand. Thanks!
@edwardlewis5967
@edwardlewis5967 5 жыл бұрын
Thank You so much !!! Great to see a Craftsman at work
@schussler07
@schussler07 5 жыл бұрын
I would love to see an episode doing a inside corner joint repair where it meets a horizontal tape joint and feathering out the point where you have a joint of new corner tape meeting old corner tape and a horizontal joint all at the same point. I’ve done it successfully in 3 coats but I had to feather it out close 24” to get it hidden. Love your videos and you do great work!
@GrendelJapan
@GrendelJapan 5 жыл бұрын
Great video,as usual! I'd love to see a video covering what the mud should look like on the wall after each pass, what sorts of things you scrape vs sand, and the types of imperfections that can pop up and how to deal with them. I'm not sure how easy mud texture is to get in video, but this is really a question i struggle with a lot. How smooth should everything be, what's okay to leave for scraping (you've mention "lift offs" in several videos,including this one), and that sort of thing. Many thanks and happy New Year!
@MichaelHall-rf3pl
@MichaelHall-rf3pl Жыл бұрын
Thanks for the video. I’m only learning about drywall and picking up pretty well on a flat wall but corners I’m having trouble with. I think I see what I need to do now
@adkbuck
@adkbuck 4 жыл бұрын
Thanks Ben, you saved me! Thanks for the detail you put in these valuable videos!
@jriddles1977
@jriddles1977 3 жыл бұрын
Im so glad I subscribe before I started skimcoating and work on a few corners. DIY renovation...
@squeekhobby4571
@squeekhobby4571 4 жыл бұрын
Best drywal videos! When you do, drywall work seems so simpler
@OBXN
@OBXN 5 жыл бұрын
Very nice video. I didn't really know how much skill with the trowel/knife this kind of work requires. Except, of course, my limited experience when I have had to repair a damaged spot has taught me to stop trying to make that one last pass for perfection because half the time that pass just screws the surface up again.
@richardwhitehead4684
@richardwhitehead4684 6 ай бұрын
When it comes to drywall videos, there’s this guy, and then everyone else. The man is really good at explaining
@edcrnj
@edcrnj 4 жыл бұрын
Bruh, just dropping some love. You're awesome, thanks for the video
@boomcity4942
@boomcity4942 Жыл бұрын
I saw a mark on the wall, but realized I needed to clean my I-pad screen. I appreciate all of your videos and training. Thank you!
@barryellis6663
@barryellis6663 5 жыл бұрын
Don't apologize for the drywall videos we all need the help in all areas of construction. You sure helped me out because I'm doing a DIY on my house. Needs a lot of work on the inside. So I will take all the advice I can get. Great videos keep them coming.
@leomardo2285
@leomardo2285 2 жыл бұрын
Love your easy explanation and low key without all the non-sense philosophical Zen comments that other tubers seems to make. Great work and good job.
@trooper11c
@trooper11c 5 жыл бұрын
You said we are going to do a more, "complicated corner bead" and my mind exploded.
@thomaskinsman8662
@thomaskinsman8662 Жыл бұрын
BRAVO! That is a great demo! You really do not know how something works until you know how it fails. Great job showing the issues!
@brucecaramante1778
@brucecaramante1778 2 жыл бұрын
I am going to add an interior wall to my basement and your teaching is fantastic. Thank you.
@carolea4290
@carolea4290 3 жыл бұрын
Very much appreciate you sharing your videos!! I’ve watched lots in preparation to do my basement. Thanks!! 👌
@jimt7851
@jimt7851 3 жыл бұрын
Thanks very much Master VC, one of the most educational, easy to follow and informative sites on KZfaq. Keep the great work up!!
@ryanhartkopf2442
@ryanhartkopf2442 8 ай бұрын
I've watched a ton of your skate videos, so it was a fun surprise to run across you in a random drywall tutorial. I appreciate the tips! Keep doing what you're doing, apparently it's working!
@johntrahan1371
@johntrahan1371 3 жыл бұрын
Thank you for all of your great videos You get to the point and demonstrate well
@mattving61
@mattving61 4 жыл бұрын
My edges have some spacing issues, can I throw some tape / compound over steel edging to cover these prior to doing this?
@mattdavis822
@mattdavis822 5 жыл бұрын
You just saved my day or I should say career thank you gr8 video as always.
@nathannahrgang820
@nathannahrgang820 Жыл бұрын
I laughed at "Now I can sleep at night"😅 I'm the exact same way with my work, has to be done right...I couldn't leave it not taped before 1st bead fill either! Love your videos man, you have great skill and are an excellent teacher, thank you for all the time you put into this, amazing job. Thank you
@TheCanadianparty
@TheCanadianparty Жыл бұрын
Super thankful these videos exist...
@rosentallcoaching
@rosentallcoaching 5 жыл бұрын
Wow, it looks so much easier when you do it!
@duncanpaisley5290
@duncanpaisley5290 4 жыл бұрын
I'm doing a small remodel and I have to add a corner bead where the new wall meets the old textured wall, which is about 5" wide. (It's a corner) How should I do that? Do I need to send all the paint and texturing of the old wall/corner?
@jwardcomo
@jwardcomo 5 жыл бұрын
After a complete gut and redo of 5 rooms in my house, this is a must view before you start your project. Wish I did.....
@dharshandharshan6131
@dharshandharshan6131 4 жыл бұрын
Sa.
@MakeWithMike
@MakeWithMike 5 ай бұрын
I habe an entire 150 sheets to hand alone ,you've been a blessing brother very much fit sharing your skills,
@fernandoguzman3867
@fernandoguzman3867 4 жыл бұрын
Good technique. Have those tools and didn’t know they can also be used for tapping. Thanks for the info
@KACQmsLIEP
@KACQmsLIEP 5 жыл бұрын
Another good tutorial. Looking forward to your carpentry videos.
HOW TO TAPE 45 DEGREE CORNERS
14:26
Vancouver Carpenter
Рет қаралды 278 М.
Taping Drywall for Beginners Day 1
27:47
Vancouver Carpenter
Рет қаралды 676 М.
Best Toilet Gadgets and #Hacks you must try!!💩💩
00:49
Poly Holy Yow
Рет қаралды 21 МЛН
Sigma girl and soap bubbles by Secret Vlog
00:37
Secret Vlog
Рет қаралды 14 МЛН
Why Is He Unhappy…?
00:26
Alan Chikin Chow
Рет қаралды 54 МЛН
What it feels like cleaning up after a toddler.
00:40
Daniel LaBelle
Рет қаралды 86 МЛН
Vinyl Corner Bead vs Steel and Paper Bead!!!
19:03
Vancouver Carpenter
Рет қаралды 131 М.
You'll never sand JOINT COMPOUND again!!!
7:07
seejanedrill
Рет қаралды 547 М.
How to coat corner bead
4:06
Drywall Shorty
Рет қаралды 13 М.
How to PreFill BEFORE Taping & Mudding. Very Important
14:22
That Kilted Guy DIY Home Improvement
Рет қаралды 828 М.
How to use a Hawk & Trowel Plastering (DRYWALL)
14:57
Maxkil
Рет қаралды 1,6 МЛН
Corner Bead Pros & Cons with THE DrywallShorty
16:43
Matt Risinger
Рет қаралды 78 М.
Top 3 Beginner Mistakes on Inside Corners!!
5:46
Vancouver Carpenter
Рет қаралды 2 МЛН
Trim Caulking Secrets That Will Change The Way You Caulk!
8:38
The Funny Carpenter
Рет қаралды 2 МЛН
How to Mud Drywall THE WRONG WAY!!!!
10:29
Vancouver Carpenter
Рет қаралды 2,2 МЛН
Best Toilet Gadgets and #Hacks you must try!!💩💩
00:49
Poly Holy Yow
Рет қаралды 21 МЛН