No video
How to Code a new Battery with BimmerCode in under 5 Minutes
Рет қаралды 64,811
Күн бұрынHow to Code a new Battery with BimmerCode in under 5 Minutes | Effortless Battery Coding Mastering BimmerCode | Coding a New Battery with BimmerCode | BimmerCode Battery Coding Made Simple #bimmercode #bimmercode_full_version
Quick video showing how to use BimmerCode to code your new battery simple and fast.
_________________________________________________________________________________________
Watch more videos:
Easy DIY: Affordable Side Skirt Extensions Installation for BMW F10 - Enhance Style
• Easy DIY: Affordable S...
Smooth Ride Ahead: How to Replace a Wheel Hub Assembly on Your BMW Like a Pro!
• Smooth Ride Ahead: How...
Upgrade on a Budget: Installing High-Performance Sway Bars Without Breaking the Bank!
• Upgrade on a Budget: I...
_________________________________________________________________________________________
Email: gjohnson7771@gmail.com
Instagram: / johnson_motorsports_diys
Support the channel: paypal.me/gjoh...
Link to my F10 Build Sheet - docs.google.co...
Make sure to like &' comment any video suggestions or any questions you guys might have !!
F10 535i MODS :
RVG Performance FMIC: www.rvgperform...
RVG Performance Catless Downpipe: www.rvgperform...
Car Labs Charge Pipe: www.ebay.com/i...
Custom Intake
JB4 Piggy Back Tuner: burgertuning.c...
RVG Carbon Fiber Spoiler - Not for resale
Walbro 450 lpfp: www.amazon.com...
BMW Style 433 Replicas - Front 19x8.5 + 35 , Rear 19x9.5 + 37
Ebay Strut Bar: www.ebay.com/i...
BC BR Coilovers with Swift Springs
_________________________________________________________________________________________
#bimmercode_bmw_f10 #bimmercode #bimmercode_full_version #how_to_register_bmw_battery_with_bimmercode #bimmercode_battery_registration #bmw_battery_registration_bimmercode #replacement_bmw #replace_bmw_car_battery #car_battery_coding #battery_coding_bmw
@Dicklefart 2 жыл бұрын
I’m sooooo glad you have an f10 subscribing now there’s not enough f10 content
@JohnsonMotorsports 2 жыл бұрын
Thanks. I love my f10.
@DronMac 5 ай бұрын
I just replaced my battery. Electrical issues are persisting. Thanks for this straightforward video!
@JohnsonMotorsports 5 ай бұрын
Definitely make sure you register the battery.
@nycupperes 5 ай бұрын
This video was excellent. I just wanted to post for all those 2019 430xi Convertible owners, to use the “Front Electronic Control Module,” then just select “Battery Type.” Everything else is the same.
@kevinflaspohler5761 3 жыл бұрын
Great video Grant. Thanks for speaking in terms I can understand. Just what I was looking for. And nice sweatshirt! Go Pokes!
@JohnsonMotorsports 3 жыл бұрын
Awesome! Glad it helped.
@marcelooliveira391 2 жыл бұрын
@@JohnsonMotorsports i put a 95ah non agm battery in my bmw 320i f30 2014. should i choose which option from this list? if i choose the non agm option, will my startstop system work normally?
@slobodanmilovanovic7281 4 жыл бұрын
I don't know which version of BimmerCode you have, but for my F32 I go to Front Electronic Module then Battery - and there just select battery type and press Code to finish. No expert level needed.
@JohnsonMotorsports 4 жыл бұрын
Slobodan Milovanovic That’s great to hear. I think they may have updated the app.
@flaminggaming5295 Ай бұрын
Hey I’m going from a 90 ah battery to a 92 ah battery. I’m in a 2008 528xi. I don’t see the option for 92 or the option to put in a custom value like I see on your screen, what do I do?
@TheCybertester Ай бұрын
Did you find a solution?
@RegoTVs 3 ай бұрын
what happens if the replacement battery is 95AH?
@ramkumarnatarajan9168 2 жыл бұрын
Hey Grant, thanks for the video. Which one should be done first? Registering or Coding?
@JohnsonMotorsports 2 жыл бұрын
I would register 1st and then code 2nd.
@sunalwaysshinesonTVs 2 жыл бұрын
@@JohnsonMotorsports Just swapped mine out. BimmerLink says code first, if the batt specs have changed, then register. [edit: Im gonna cut & paste the context of my battery swap I wrote here into it's own comment]
@chrish8444 3 жыл бұрын
Good stuff would love to see more coding using bimmercode
@JohnsonMotorsports 3 жыл бұрын
Sounds good! Anything you want to see in particular?
@chrish8444 3 жыл бұрын
I have purchased the parts to add the sport mode to my 535 but I'm overwhelmed by the coding info that's out there. I just bought this car and have never used bimmercode.
@chrish8444 3 жыл бұрын
Also would like to see how to change ambient interior lightening colors.
@JohnsonMotorsports 3 жыл бұрын
@@chrish8444 sorry, I can’t help with that. My CIC system does not have the option to change ambient lighting. That is only on the newer NBT and up models.
@JohnsonMotorsports 3 жыл бұрын
@@chrish8444 I used Esys to code 2tb. Here’s a link to coding 2tb. f10.5post.com/forums/showthread.php?t=1079869
@rajenbai9304 Жыл бұрын
Tanks bro…i already have the BimmerCode going to replace my battery. I want to build in sli module do you have a video for this? BMW F 10
@drifterpg 5 ай бұрын
Hi Thanks for Video, If replacing like to like 105 battery still require registration?
@JohnsonMotorsports 5 ай бұрын
Yes you still need to register when you replace the battery, the DME monitors the battery life and changes the charging patterns accordingly.
@sunalwaysshinesonTVs 2 жыл бұрын
My old batt lasted Im gussing 7 years (I have a 2014 model year, stamp on the - terminal's stamped 36/13). The old was 90Ah, the new 92Ah. Most forums says no re-coding needed as the capacities are close enough, but my asshole is bugging me to figure out how to re-coded to match the new batt but there isnt an option to do 92Ah with the current version of BimmerCode. Speaking of which, I couldnt find 3072 coding line however BimmerCode did provide an option to change the capacity without having to go into Expert mode.
@JohnsonMotorsports 2 жыл бұрын
Yeah, I don’t think 92Ah is an option at all. Not just in Bimmercode.
@mb24777 Жыл бұрын
How do I enter a manual AH? I bought a 100AH battery but only 105 shows as a option. Would I be ok picking 105?
@JohnsonMotorsports Жыл бұрын
I don’t think you can manually code AH. You may want to do some more research, but I’m pretty sure you would select the highest AH that doesn’t not exceed your battery. In this case you would actually use the 90ah, but I would ask around on the forums to verify.
@redawyoxo Жыл бұрын
Hey man so my battery is 100 AH and im trying to change it in custom value but i dont know how. Should i select the 105 ah option? Plz help
@JohnsonMotorsports Жыл бұрын
Its been awhile since I researched the battery settings, but I believe you will want to set the value at the lowest, closest value. So in other words the 95 AH. This should keep the system from overcharging the capacity of your battery. You will want to double check though.
@viralpatel1820 3 жыл бұрын
Hello Grant, I just learned the difference between Coding and Registration of battery after watching your video. Thank you. I just changed the battery (from Lead to AGM) and now I need to code and register the battery for my 2005 7 series. Would you be able check to see if BimmerCode App supports coding and registration of 2005 7-series? Any other option for coding and registration for 2005 7 series. I have looked at many apps but they don't support the coding and registration for 2005 7 series. I appreciate your help. Thanks again.
@JohnsonMotorsports 3 жыл бұрын
From what I can see, Bimmercode does not support the 2005 7 series.
@JohnsonMotorsports 3 жыл бұрын
I think your main options for registration and coding for that year will be Inpa or Esys, but I don't have details on the process for those years.
@narithlot 8 ай бұрын
Do u know how to do a custom value? Mines is 100amp but i dont see that option
@JohnsonMotorsports 7 ай бұрын
Sorry, I don't think you can do a custom value. From what I recall, you have to choose from one of the preset options.
@JKGarageBMW 8 ай бұрын
Curious - what battery did you replace with?
@JohnsonMotorsports 8 ай бұрын
I went with the Everstart AMG. The specifics are in the image of the thumbnail. Bottom right.
@col3760 Жыл бұрын
I'm changing it from a 90 to 92. Is that fine to just register to 90? And also do CCA have to be coded aswell?
@iTsBlue2 Жыл бұрын
yeah just do 90 since they are so close to each other it shouldn't matter, no you don't have to register ths CCA
@RO-Zay 3 ай бұрын
Can I use Bimmer Code to Register my new battery?
@maninavette Жыл бұрын
Will bimmer code reset the seat fault code ? Enjoy all your content
@JohnsonMotorsports Жыл бұрын
I don’t think so.
@lugo1480 4 жыл бұрын
Can you post a video on how to register the battery? I'm debating if I should go a certified BMW shop to get it done, or if it's cheaper to just buy the apps and hardware to do it myself.
@JohnsonMotorsports 4 жыл бұрын
I will see what I can come up with.
@lugo1480 4 жыл бұрын
Grant Johnson hey so I got in contact with BimmerCode support and you can code with BimmerCode and register using BimmerLink. You don’t have to go with other software.
@Top_g80comp 4 жыл бұрын
What is difference between coding and registering???
@bmwsolutions7880 4 жыл бұрын
B When you register, the car recognizes a new battery. You need to code when you can't find the exact battery your car had. For ex. Your car may have a 90ah amg battery but you bought 95ah, so you need to code it as 90ah battery on bimmercode. And also register it as the same battery on bimmerlink or any other software. However, some code it with the new battery specs as in the video but your car electronics may have a problem with a higher Ah coding, so I'd always code it to my car battery Ah capacity just to be safe.
@aa7h911 4 жыл бұрын
@@bmwsolutions7880 Is there a way to check what the car is currently coded with if you only have Bimmerlink? So anyway to check if my current 80ah battery has actually been coded properly as a 80ah?
@jorgemartinbg 9 ай бұрын
Which external battery charger do you people recommend?
@jorgemartinbg 9 ай бұрын
What if the code tab doesn’t change color to tap it and so it can code?
@JamesWelbes Жыл бұрын
what's the difference between "Registering" and "Coding"?
@JamesWelbes Жыл бұрын
I used BimmerCode to "code" the battery I think, but I had to pay $45 for that, and I don't want to pay another $45 for BimmerLink to "register" it
@saint3v Жыл бұрын
You figure it out bro? I’m thinking of just using a laptop
@JamesWelbes Жыл бұрын
@@saint3v I just caved and bought bimmerlink and registered it. Super dumb, never buying a BMW ever again
@matthewch2720 2 жыл бұрын
What did you use to register with the amp hour change? I also just changed from a 90 to an 80. I have access to an ObdlinkCX and Bimmercode. Will I be able to register this new battery with different spec with that setup? 2014 335i
@JohnsonMotorsports 2 жыл бұрын
I used Ista+ to register the battery and yeah I increased the size.
@the_ghost_of_cale_gundy 3 жыл бұрын
Will bummer code allow u to register the battery after changing battry type??
@JohnsonMotorsports 3 жыл бұрын
Not that I am aware. I had to use Ista to register my battery.
@D.J.ZAPELO 3 жыл бұрын
Has any one try this on E series...changin amp.power batt.? For exp. like Grant did form 80 to 90 amps.
@JohnsonMotorsports 3 жыл бұрын
I’m honestly not sure. I would imagine it would be the same process for the E series.
@theofficialroyalz7790 2 жыл бұрын
any update bro? looking for it in my e92
@czarredd Жыл бұрын
Great video. I'm going from a 92ah agm battery to a 100ah...does it need to be coded? If so, would I customize the ah on Bimmercode to 100ah or use the preset 105ah? Thanks
@JohnsonMotorsports Жыл бұрын
They have updated Bimmercode and now you do not need to select expert mode. The battery options are in the normal coding section, however you still can only choose these presets. It may be possible, but I’ve never seen anyone customize the ah.
@JoshuaClarkHexter 14 күн бұрын
What did you end up doing I have the same thing happening to me
@immortal4942 3 жыл бұрын
what if i am replacing the battery with same exact one? both 90ahm
@JohnsonMotorsports 3 жыл бұрын
Then all you need to do is register the new battery. That can be done with Ista or Carly. Registering it will tell the DME that you installed a new battery, which will adjust the charging parameters.
@burnjack291 Жыл бұрын
Can you do 90ah to 95ah with bimmercode? Already registered my battery just need to code the AH , old one was 90ah, and the new one is 95ah. Thx
@JohnsonMotorsports Жыл бұрын
Yes, you should be able to knock that out.
@JohnsonMotorsports Жыл бұрын
Actually, I don’t remember if the 95ah option is available. It may be either 90 or 105. In that case you would have to select 90ah.
@moyhaq 3 жыл бұрын
Hi So registration alone will not be sufficient? What are the consequences if I don't code in a higher amp batt. I do have the bimmercode app but just wondering if it will cause problems if one did not code in a higher amp batt.
@JohnsonMotorsports 3 жыл бұрын
If you don’t code the battery and you change sizes it could cause premature wear and reduce the life of the battery.
@moyhaq 3 жыл бұрын
@@JohnsonMotorsports Thanks for the reply.
@12babyapes59 3 жыл бұрын
Will the battery stay registered if you disconnect it for maintenance ?
@JohnsonMotorsports 3 жыл бұрын
Yes, the battery will remain registered.
@D.J.ZAPELO 3 жыл бұрын
Can you make a video how to register new battery? Can it be done with bimmercode?
@JohnsonMotorsports 3 жыл бұрын
Battery registration can not be done with Bimmercode. You can do it with Ista. I’ve also been told you can register with Carly, but I’ve never tried.
@D.J.ZAPELO 3 жыл бұрын
@@JohnsonMotorsports It can be done with bimmerlink. Thx.
@JohnsonMotorsports 3 жыл бұрын
@@D.J.ZAPELO Yeah, I was thinking that as well. What are you planning on using to register?
@D.J.ZAPELO 3 жыл бұрын
@@JohnsonMotorsports i bought a veepeak obd and app. bimmercode. i have already coded some features on e91 LCI. now i will also buy the bimmerlink app. with which you can delete errors and perform diagnostics
@JohnsonMotorsports 3 жыл бұрын
@@D.J.ZAPELO Sounds good. You should be set then.
@edwinmartinez6794 3 жыл бұрын
is this a a bit more simple than mycarly or the same? Thank you
@JohnsonMotorsports 3 жыл бұрын
I've never used Mycarly, so unfortunately I can't really compare.
@tracyr5594 Жыл бұрын
Can’t you just register the battery with bimmercode as well?
@JohnsonMotorsports Жыл бұрын
I don’t think so, unless they have added that feature recently.
@liloso6190 Жыл бұрын
can I do this with a 328I 2007 bmw?
@JohnsonMotorsports Жыл бұрын
You should be able to, however I have no experience with the 3 series.
@TheWista13 3 жыл бұрын
If I choose non agm battery list it Will work with ordinary battery? I disabled start stop for default and I dont need it
@JohnsonMotorsports 3 жыл бұрын
Yes, you should only choose AGM if you have an AGM battery.
@TheWista13 3 жыл бұрын
@@JohnsonMotorsports But can use non agm As well if I code it?
@JohnsonMotorsports 3 жыл бұрын
@@TheWista13 Yes. The DME will accept Standard Flooded batteries or AGM batteries. If you don’t have a AGM battery, then use the non AGM settings.
@rhollyday Жыл бұрын
Liked Subscribed Grant, I already registered new battery in F25 X3 with my Foxwell scanner before I realized the Foxy can't code the capacity change. So after i change capacity with Bimmercode then do I need to reregister the battery again after changing the capacity? Or are they are independent changes? Thank you!! -Rich in NC
@JohnsonMotorsports Жыл бұрын
They are independent changes. You should be good just changing the capacity.
@JohnsonMotorsports Жыл бұрын
Thanks for subscribing!
@yorklarese8215 3 жыл бұрын
How do you know what specific code to use that opens all of ah options. E60 vs F series etc..?
@JohnsonMotorsports 3 жыл бұрын
From what I understand, Bimmercode is pulling the preset options available in the corresponding ECU for battery profiles.
@yorklarese8215 3 жыл бұрын
I appreciate the quick response. Is safe to that the code your using in the video is a generic ?
@HE_IS_007 Жыл бұрын
How to code with 2012 528i xdrive??? It keeps saying battery discharge like my old battery is still in. Hell????
@TomorrowsMemories Жыл бұрын
Can I code my battery for a 2007 Bmw 328i?
@JohnsonMotorsports Жыл бұрын
I’m not sure honestly. You can try.
@rengietorres9482 2 жыл бұрын
How did u register it first?
@JohnsonMotorsports 2 жыл бұрын
I used Ista to register the battery.
@Legendarygamer0202 3 жыл бұрын
Quick question, can I register the battery with BimmerCode? How does that work?
@JohnsonMotorsports 3 жыл бұрын
Legendarygamer0202 No, you will need to use another program to register the battery. I used Ista for mine.
@Legendarygamer0202 3 жыл бұрын
Grant Johnson ok thank you! I see Bimmer link has one
@onemanturk 2 жыл бұрын
Guys so can both Bimmercode and Bimmerlink be able to code a new battery? (Vehicle BMW M4) If so, both are able too, which of the two is a better purchase?
@JohnsonMotorsports 2 жыл бұрын
I haven’t dealt with Bimmerlink, but from what I understand it is more of a diagnostic tool then Bimmercode. Bimmercode, let’s you unlock features on the car. It depends on what you need.
@col3760 Жыл бұрын
Are they not the same purchase? Yoy gotta purchase separate?
@oshii666 Жыл бұрын
@@col3760 no bimmercode and bimmerlink are separate
@hugobecker442 3 жыл бұрын
Thank you sir!!
@NightmarishPT 4 ай бұрын
Does going from 90 to 95 requires coding?
@raulosorto6283 27 күн бұрын
Did you found out any information on that?
@NightmarishPT 20 күн бұрын
@@raulosorto6283 you always need to register and code if you change amper
@JayBHooks 3 жыл бұрын
Hey Grant! Can I use BimmerCode to change the specs in the DME for a different amp hour, and then use BimmerLink to register it? I know that BimmerLink (Like Foxwell NT510) can only register a battery if it's of the same specs as the old one. So, will BimmerLink or the Foxwell register a different kind of battery if I code the difference in with BimmerCode first? If not, why not just use ISTA both to code in the different type of battery AND register it? Thanks!
@JohnsonMotorsports 3 жыл бұрын
Jay Hooks Yes, that’s how I would proceed. Use Bimmercode to update the amp hour and register via a different method. I registered my battery using ISTA, but could not find a method with Ista to update the amp hours. That’s when I stumbled upon this method with Bimmercode.
@JayBHooks 3 жыл бұрын
@@JohnsonMotorsports Wow so Ista couldn't change the amp hours?? Alright then. Thanks for the quick reply. Any thoughts on the Carly app? It seems to be able to both change the amp hours AND register the new spec'd battery, but it looks costly...
@JohnsonMotorsports 3 жыл бұрын
Jay Hooks Well, Jay. All I can say is I couldn’t figure out a way to change the Amp hours in Ista. Now, its possible I missed something, but I researched for hours and spent time in the program searching and came up empty handed. To me it would make sense to do it all in Ista. Hopefully, I just couldn’t find it. As far as Carly goes, I’ve never used the program. I have a Veegate Obd2 code reader as well as a Bluedriver code reader. I also have Ista and Esys, so I didn’t have a reason to purchase Carly.
@JayBHooks 3 жыл бұрын
@@JohnsonMotorsports Gotcha. Thanks!
@JayBHooks 3 жыл бұрын
@@JohnsonMotorsports Sorry Grant one last question. How do I find out which menu steps to take to access battery types for my vehicle? At 2:30 you said it's important to know this and I take your word for it. In other videos where guys use BimmerCode the Car Access System option doesn't even show up on their screens. Thanks
@quangtranvn 3 жыл бұрын
Nice video. Just what I needed. Thanks a lot. I have a question, will this work on my e60? Thanks
@JohnsonMotorsports 3 жыл бұрын
This should work on an E60, but I have no experience with one.
@quangtranvn 3 жыл бұрын
@@JohnsonMotorsports thanks for your quick response man
@quangtranvn 3 жыл бұрын
Update: The Veepeak adapter will not work on E60 using Bimmercode, only OBDLink MX+ works, but the price is 4 times of the veepeak
@JohnsonMotorsports 3 жыл бұрын
@@quangtranvn That sucks! Any other options??
@quangtranvn 3 жыл бұрын
@@JohnsonMotorsports I bought the OBDLink MX+ lol
@55fyasko Жыл бұрын
How do I know what module I have
@JohnsonMotorsports Жыл бұрын
You may have to connect to Bimmercode and see what modules are available.
@55fyasko Жыл бұрын
Thanks brody i got it done.
@carlosimmons6025 3 жыл бұрын
was just wondering is that the telegram app on your phone?, because im in some groups on there
@JohnsonMotorsports 3 жыл бұрын
Carlo Simmons telegram??? Nope, not that I know of.
@carlosimmons6025 3 жыл бұрын
Ok
@marcogonzalez6695 4 жыл бұрын
Can you add the link where you bought this?
@JohnsonMotorsports 4 жыл бұрын
Sure, but what are you referring to?
@marcogonzalez6695 4 жыл бұрын
The actual module that you plug into the car. I'm assuming it will work on a 2011 550i, right?
@JohnsonMotorsports 4 жыл бұрын
Ok. This is the Veepeak OBD2 that is use for Bimmercode. Yes, it will work on your 550i. Veepeak OBDCheck BLE OBD2... www.amazon.com/dp/B073XKQQQW?ref=ppx_pop_mob_ap_share
@jasonninios 4 жыл бұрын
This only covers changing the battery TYPE, not registering a new battery!
@JohnsonMotorsports 4 жыл бұрын
Jason Ninios Right! You need Ista for Registering the Battery.
@yorklarese8215 3 жыл бұрын
Grant... do I need expert mode to code the battery. There is a section where I can change the ah without going to expert is that correct?
@JohnsonMotorsports 3 жыл бұрын
From what I recall, Bimmercode did an update and the Battery settings should now be in the normal section.
@tajdidajman4889 3 жыл бұрын
can you do a custom battery ah?
@JohnsonMotorsports 3 жыл бұрын
Tajdid Ajman No. As far as I am aware. There isn’t an option for setting a custom ah.
@luciananghel5595 3 жыл бұрын
@@JohnsonMotorsports i see at 3:14 . down looks custom value button
@JohnsonMotorsports 3 жыл бұрын
@@luciananghel5595 Right, there is a custom value option however the corresponding ECU won’t know what to do with a custom value. The options listed are what the ECU has been programmed for.
@joker8541 2 жыл бұрын
My bimercode no have car access system program.🤔🤔🤔
@nigelvlogs2386 Жыл бұрын
Mine also. Did you ever find it?
@CartubeCoIl 4 жыл бұрын
I don't have this option
@JohnsonMotorsports 4 жыл бұрын
What option are you referring too?
@megaice811 4 жыл бұрын
@@JohnsonMotorsports car access system
@JohnsonMotorsports 4 жыл бұрын
What year and model car do you have?
@khmertech1678 4 жыл бұрын
I have x5 and don’t have that option???
@JohnsonMotorsports 4 жыл бұрын
That's weird. I would have to do some research on the x5. What year x5 do you have?
@khmertech1678 4 жыл бұрын
Grant Johnson 2014. I think they move option to bimmerlink so people can buy another app. It all about money
@JohnsonMotorsports 4 жыл бұрын
khmertech you’re probably right
@AugustDreamScape Жыл бұрын
My shit is all in german on on bimmercode lol. I dont even have spme of these options.
@nathangreen6286 2 жыл бұрын
Stop scaring people, you CANNOT ''brick'' your DME if the battery dies while mapping. You just charge the battery up or put a fresh one in and restart the mapping process. This has happened to me, so I can vouch for this.
@dasmalas9960 2 жыл бұрын
wow
@m.systems 2 жыл бұрын
you can keep tempting fate
Кушать Хочу
Рет қаралды 6 МЛН
Help Me DIY
Рет қаралды 66 М.
ThicGarage
Рет қаралды 9 М.
CVR POV
Рет қаралды 1,5 МЛН