Not only excellent information but expert delivery. Made the point, no waffle, and recap at the end. Perfect. A channel to subscribe to.

Hi Jonathan, I have struggled for a while to get these working even after watching other youtube videos, but you made it so simple, so many thanks. Keep up the good work

you dont understand how much rage i had about his i searched evrery tutorial and found nothing but you have helped so much and i thank you for this tutorial u got a new sub💯

Thank you, Jonathan. Very well described instructions mate. I have liked and subscribed to your channel. I was pulling my hair out trying to get it to calibrate for the FBW A32NX and watched quite a few videos to no avail, but yours was the one that did the trick. As you mentioned, right out of the bat, set the sensitivity settings to 0, create a duplicate profile, and then CLEAR the Throttle L-Axis and Y-Axis (IMPORTANT), and reset them again. That did the trick for me. I was about to send the unit back thinking it was faulty, now I'll order the Quadrant addons. Cheers again!

Thanks a lot again, Jonathan ! I wasn't aware of how the detentes were configured 'spatially', including idle, climb, cruise etc. At last I can now have the Quadrant set such...it doesn't have the aircraft wanting to be 'let out of the traps' at full pace anymore, as soon as I release the brakes ! ( I can't tell you how many times I've found it really awkward just trying to set the idle space in X-Plane 11, in MY ignorance...which obviously has a required 'knock-on' effect to keeping the aircraft idling on the ground, rather than 'running-away' as soon as I release the brakes !! ). Keep up the great work Jon' much appreciated !

Brilliant explanation on the axis and what to do, now I understand why I had throttles at climb mode from start up .

Well done Jonathan. You've saved me hours of troubleshooting with the FBW setup. A thousand thanks!

THANK YOUU!!! I had to end stream on vatsim because when I pushed back it went full throttle on start up even though I was on Idle. Will link this video for my viewers! Cheers 🥂

Thank you very much for your great explanation! Now it has worked. For me, the new setting of the Joystick Axes was the most important point.

Once again you’re a lifesaver, Jonathan. I was having a mare and you sorted stuff real quick.

after hours of trying to find a fix for this same exact issue, you sir saved me some frustration, thank you so much for this video. WORKS 100% WITH THRUSTMASTER THROTTLE QUADRANT

The only one who made this video simple in whole KZfaq. Thanks mate

i love you. i was struggling with the settings for litterary months and now everything works perfectly

Straight to the point and just what I was looking for. Many thanks mate, you did me a favor!

Thank you very much Jonathan. I have been looking everywhere on a proper guide to set the TCA Airbus throttle quadrant up, and your guide helped! I have my throttle quadrant set up now and working. I am definitely subscribing! greetings from Hungary :)))

My throttle detents work perfectly, thanks to you! Much appreciated.

Thanks bro! I was trying to find this type of tutorial for 2 months and finally found it:) Thanks mate one more time!

Thank you so much, can’t tell you how happy I am. Thanx Jonathan for this ❤❤❤

Great work. Thanks for the beginner friendly and patient explanation. With your instructions, it worked right on the first try.

Thanks so much i was looking all over youtube for this and you helped me so much!

Damn bro, i have never heard someone sooooo damn precise! Thnx for everything!!!

this is by far the best tutorial i have seen in my entire life, thank you very much

Thank you so so much mate! I had so many troubbles and u solved every single one!!!

Thanks, after several videos you are the right one!

Thank you for the great information. I could not figure this out for the life of me. Your video was perfect. Thanks again.

Deserves a medal for this tutorial.

So useful and beautifully explained, cheers

Tysm man! Really helped me out

Fantastic explanation. Be best and simplest I've ever seen. Solved my problem. Congrats!!!!!

Thank you very much for this detailed description❗️Without these instructions I would have been lost calibrating the throttles. Regards, Bo 🇨🇭

Hi Jonathon Thank you so much for this video on FBW A320 TCA quadrant setup. I have been struggling for days now and came across your channel. Top marks my friend. I do wish the people at Thustsmaster would include instructions similar to yours or even attach a link to your KZfaq channel. Cheers, George

Easy to understand. Thank you!

Thanks for the clear and to the point explanation. It worked.

Great Job. Very useful information.

Thank you my friend, just what I needed to know :)

Really helped and was a great step by step process on how to do it. Thank you!😁

Great tutorial, thank you!

Great help and it works very well, thank you

Extremely helpfull, thank you!

Spent hours trying to figure it out but thanks to your vid they now work

Great advice bro keep up the good work

What a superb video, thanks for saving my sanity!

Thank you thank you thank you thank you a million. This was a great tutorial that I have been looking for for a while. You are AWESOME. I’m liking and subscribing. Thank you again good sir.

Thanks Jonathan.....That was awesome!

Great & Simple Explanation.... Thanks very much.

Thank you, helps so much!

Hi Jonathan, you made my day! Thx a lot!!!

Thank you so much Jonathan, really helped a ton mate. Thanks!

Perfect tutorial, everything worked just fine, thanks

A perfect guide again. Thanks!

Thanks for this tutorial. I was going mad trying to get the controller to work and got it working correctly after/while watching this video. Have a cupa on me!

Thanks Jonathan, it was driving me crazy.

Thank you man! You rock!

Amazing You Are A Life Saver!

Thank you for this video!

Thanks! Doing only first step made it for me

thanks. made my day this problem seemed impossible to fix :)

Thank you for the video!

I LOVE YOU! TY SO MUCH FROM ARGENTINA

Thank you for your help😁

THANK YOU!! YOU ARE THE BEST!!!

Bro thx soooo much my man i had the problem that everytime i pressed esc the game did my throttle to max and know i fixed that Thx sooo much

Man I. So glad I found this vid, thank you sir!,,

worked great for me thanks

You sir are a genius thanks you so much for this

That was perfect! Thank you good Sir!

Thanks a million!

Thanks for this video, my throttle stopped working and doing it your way fixed the issue.

Thank ya mate that was really helpful

Thankyou very helpful

omg thank you so much!!! you earned new sub

Thank you, so much dear Captain. Appreciated your detailed video. Thanks & best Regards

Thank you, Jonathan! You've saved me again lol

Many thanks for this superb video - after days of having struggled with the recently acquired throttle quadrant. It's just unbelievable that the manufacturer's default is so hopelessly wrong!

That was awesome...thx

Amazing video, could you do a configuration tutorial (for the A320) on the thrust master rudder pedals.

Thank you so much.

Great tutorial

Brilliant tutorial, thanks

thank you bro you really helped me

Thank you for clarifying the reverse Idle setting and confirming that there is no detent for it. That part was not clear after watching a video from someone else.

Thanks great video!!!!

THANK YOU SOOOO MUCH!

Thank you, Sir!

Thank you so much!

Thank you man!

Thank you very much sir

thank you!!!!!!!!

Legend!

Love you THANK YOUUU

Amazing, thnk u!

Thanks that fixed it

Thank you very much Jonathan I needed this....Just bought and received my Thrustmaster Pro X and for the first time after pushback and roll to the active my airbus got away from me because the detents were not calibrated correctly

Thank You soooooooooooooooooooo much

A couple of things since there are new versions: The reversers no longer show in virtual cockpit moving until you actually start the engines. Some update is responsible for this. I just wasted an hour figuring out why the reverse detent was not updating in the cockpit. "Reverse Axis" is not the reversers. Its just reversing the analog direction (kinda like when you pull down on the stick to go up, and you can reverse that direction). By ticking this box you are assigning TOGO to IDLE for example.

Thank you!

life saver thanks

thank you thank you thank you!!!

The detente work but on the Display it only goes from idle to TOGA when in CLB even though in the cockpit it shows in climb.

Thank you for this! I was pulling what’s left of my hair out…