Thanks for watching! Every cable you ever need for your B&O system can be seen on Steve's website here: soundsheavenly.com If these videos have helped you to enjoy your Bang and Olufsen products, please consider buying Steve a coffee at www.buymeacoffee.com/soundsheavenly - many thanks!

Cheers Steve my lead arrived this morning, 5 mins and my Core was connected to my 9000 and working.

After 17 years in storage in a basement in Denmark my old Beosound Ouverture and Beolab 8000 speakers have finally made their way to UK and into my living room. The speakers work perfectly and remain in absolute mint condition, whereas the Ouverture unfortunately has a laser fault and a broken or faulty drivebelt for the cassette player, but is otherwise also in mint condition. Planning to have those faults fixed in the near future I have played around with different ways of playing streaming music in the mean time. The first one I tried was your tip on how to give the speakers WIFI capability via the line ports and an Apple Airport unit, which works a treat. However, I wish to be able to use my Ouverture as well (the radio works and hopefully the CD player and the cassette player will soon be fixed too) without having to crawl around flipping the little switch in the connector housing at the base of the speakers, every time I want to swap between WIFI and Ouverture as input. My solution has been to connect a little Echo Dot via its 3.5mm port to the AUX port on the Ouverture, which works great and I can now play streaming music using voice commands as well as internet radio channels and all the other things the Echo will do. The only problem is that the volume, as expected, is fairly low even with the Echo Dot turned up to full volume and I find myself having to turn the volume up on the Ouverture from typically around 28 to 32, when playing through the Echo Dot. I there any fix for this problem? It is admittedly only a minor problem, and I am planning on getting a BEO4 remote control so I can easily adjust the volume via the Ouverture, but it would be fantastic if there is a way of achieving roughly the same volume output whether I (in the near future) play a CD, the radio, or streaming music via the Echo dot. Sorry for the very longwinded question 😄

Brilliant Mate 👌

Hello Steve! I emailed to you a few weeks ago about my beosound 9000 not spinning despite a new laser was installed just March this year and to connect the beolab 8000 to my onkyo amp. So i first brought the beosound back to the repairer to complain but miraculously, the thing immediately worked again! I just found out the trick to NOT turn off the machine in the power outlet (or disconnect the plug) at home and there shouldn't be any problem!

What about doing that plus connecting a TV with the Core to play sound via the 8000 or 9000 without sound delay and without purchasing the new BEO bluetooth remote? 😉

Hi Steve, I enjoy your videos, thanks. Is there a way to include a Beosound Core to a Masterlink network?

Hi Steve, What is the best way to connect my Beolab 14 to the connection Hub originally produced for the S8 system? I now used a power link with two splitters to individually connect to the suB, front and rear but the Sound is now very bass heavy.. thanks in advance

Hi Steve, can I use the CD Player of my old Overture to play CDs over Core to other B&O music systems in my setup (BS1 and BS35)? If not, can I use my Avant NG TV to connect Disc Player and play them on the BS35? Thank you!

Hi Steve. Need your expert tips. Just became the owner of a Beosound 9000 Mk3. Already own a Beogram 4000 which I have played on my beomaster 1900 with my Beolab 8000 speakers. Also bought a Hall Audio Streamer. I now want to be able to stream music from my Hall streamer, play vinyl records from Beogramen and CDs from Beosound 9000. What do I need for the best setup. Maybe I don't need to use my Beomaster 1900.

I have a bio system 2500 (1993) how can I connect to internet?

Hi I like to ask a question for you. Is b&o type no 2601 beosystem Connect with passive speakers?Do I need converter or equipment?Because I have type 2601 beosystem , without speakers of that system, and I like to connect that type 2601 with my speakers which are not active.Tnx

Is it possible to connect a BEOLAB 11 subwoofer to the core (with BL 8000s connected to the BL11)

Hello Steve, our Beosound core has stopped functioning despite best efforts to get it fixed! What are our alternatives if we don’t want to spend $1000+?

Hi Steve. Greetings from Denmark. Is it possible to get the Beosound Core high 24-bit/192kHz digital sound quality using your RJ45-powerlink 5 pin aux cable connected to the aux input on Beosound 3200 and then out to the speakers?

Hello Steve i have a beosound 9000 with 2 beolab 6000 and 2 beolab 8000 i want to conntect the system to my LG tv in order to have the sound of the tv over the system. Thank you

Hello Steve, I would like to connect a beosound 3000 to a beolink passive amplifier. What kind of cable I need? Thank you for your help

Hi, I have a question. How to connect my Beosound 9000 MK3 to a Beosound A9?

Steve. I would like to get the Core connect four Beolab 8000s to it. Is that even possible, considering that the Core has only one PL socket

Hi Steve, will an RCA into the line in/Optical work?

Hi Steve Can i use a floorstand for a beovison 7 for my beosound 9000? And can i use the speaker from a beovison 7 with beosound 9000?

Hello! I’ve got a beosystem 5500 and I would like to connect my technics turntable into it. I was trying a few times, but It didn’t worked. The sound was terrible and very silent. The pickup is new. What should I do to be able to listen to vinyls? Does it means that I should buy preamp or is there something wrong with my turntable?

Hi Steve, could you please give me the details to connect the beosound 9000 to play through headphones either hard wired or Bluetooth. Regards Stan Errington

Hello Steve I have installation Beovision avant last model and bs 5 (with BeoLink converter) Is it possible to connect a bs core ? And how? Thank you DAVID from France

hi steve if I have understood you correctly then the powerlink connector on the beosound core can be used as an input from my ovarture and as an output to my beolab 8002 speakers by using the adapter connector as you show in the video

How do you connect a soundbar to a Beomaster 6500. Soundbar has RCA, optical, HDMI and USB. I already have the speaker ports on the amp used for speakers so I'm a little confused

Hi Steve, thanks for the video. I have the following question. I have a Beosound 9000 (two Beolab speakers attached through PL) and two Beolab 3500 (connected using the MasterLink cable). What is the most userfriendly way to incorporate a Beosound Core into this setup? Beosound Core as AUX input on Beosound 9000, use Beosound 3500 by switching to AUX to listen to Beosound Core content. Beosound Core is added to be able to listen to Radio (Tune-In, Spotify, etc. as regular UKW radio is unavailable). Guess devices are controlable with the new B&O Remote?

Hi Steve. I may be confused but I would need your help please. I am about to purchase some Beolab 18s with a Beosound Core as wired setup. I thought the Powerlink connection on the Core was an output to connect to the speakers. How would I then connect an older Beocenter 2 for instance to this same Powerlink connection on the Core? Or is it a case of just needing a split adapter, and the Powerlink connection on the Core very much working as both an input and output?

Hi Steve. Thanks for your very informative videos. I own a BeoMaster 5 and BeoSound 5 with BeoLab 5 speakers. Is it possible to connect the Core to my BeoMaster 5 / BeoSound 5 System? Really appreciate your answer. Take care, Harald

Hi Steve, just a question if I may, is it possible to use the core with two BeoLab 3s (which subsequently each use a receiver 1 to work with an Avant over wisa)? How would I be able to stream music from the B&O app or Deezer to the core without powering on the TV? It seems complicated to me.

Hi Steve! I got a B&O Core, B&O Transmitter 1, Beolab 18 & 19 in addition to a Beosound 9000. I usually stream music through Tidal/Core, but since I have this Beosound 9000 from bygone times, I connected it through B&O Transmitter 1. The cable is connected through the headphone outlet on BS9000 and further on to the RCA input on the Transmitter 1. I then use remote B&O 4 to run it. A B&O store told me this would be the best setup for the BS9000 because the Core software cannot manage the BS9000, only a stand alone remote as B&O 4. Since you in this video explain how to connect the BS9000 directly to the Core, I'm very curious how you control the BS9000 through the Core software? Looking forward to your reply! SMILE!!

Hi Steve. Thank you for your info. Question. I want to Connect a beosound 9000 to a beosound Shape. And be able to use the shape as an audio system (like normal) but also as a speaker for my BS 9000. Is that possible? And how? Thank you. Mark

Hi, my Google Home app connects with the B&O Core. But the Google voice assistant app seems not to connect with it. Any suggestions? Thank you in advance.

Is this cable not available in 10 meter length ?

Top

Hi Steve, Bit of differents for the B&O 95 seconds challenge! Your mission, should you choose to accept it. lol Is it possible to connect the B&O EarSet 1 Home earphone to a computer?

Hi Steve, I just moved and now my CD in B&O Overture wont start. What Can I do? Greetings from Denmark

Well , didn’t explain what will happen with remote control in either case