how to connect an IP camera,dvr,nvr to laptop from Ethernet !!connect an IP camera to your PC !!
my new website
How to connect an IP camera to your PC or to the computer monitor? If you've got your security video IP cameras home, and you don't plan for an NVR, you may get problems on how to directly connect an IP camera to PC (without routers, without internet, without DVR or without its receiver). This doesn't mean you are an idiot, but you are just not a technical guy or you just don't have experience in this kind of stuff.
It's wise to hook up your security IP cameras to a computer (or computer monitor) for 24/7 monitoring and recording. You can, with or without the Internet, connect your indoor or outdoor surveillance cameras to PC
The steps below detail how to connect your security IP camera directly to PC/Mac, without an NVR or DVR, without a router network, without WiFi, and without any fees or complicated configuration.
Alternatively, you can try the top 2 solutions for cameras without WiFi I have mentioned.
Requirements:
Your WiFi or PoE camera
The camera's power adapter
Your computer (desktop or laptop)
A network cable
And that's all.
Here is how:
Step 1. Get your security camera charged.
Use the power adapter to get the camera plugged-in and charged. Normally, when you buy a WiFi IP camera, it comes with a power adapter. For a PoE camera, ask the supplier and buy one that's workable for the camera.
Step 2. Use the network cable to connect to the camera and the computer.
Normally there would be a 2-in-1 or 3-in-1 cable attached from the camera. Find the network connector from that cable and use the network cable to connect to it. Then connect the other end of the network cable to the computer.
If your computer has a network already, disable it - make sure your computer is offline.
Step 3. Scan and find out the security camera's IP address on the computer.
Now the security camera is connecting to your computer basically and physically. But you still can't view the camera on the computer.
What you need to do now is to scan and find out the camera's IP address. There should be surveillance software from the same supplier with the camera.
Step 4. Change the computer's IP address to the same network prefix of the IP camera.
So in Step 3, you get your security camera's default IP address. In our test, the default IP address of the camera we use is 192.168.177.100, and now you need to change your computer's IP address to 192.168.177.x, where x identifies the node/host and is the number between 2 and 254. So let's say the computer's IP address is 192.168.177.12.
IP address 101: An IP address consists of two parts - one belongs to the network address and one belongs to the node address. All nodes on a given network share the same network prefix but have a unique host number.
Now to change the computer's IP address (we take Windows 10 as an example):
1) Press the Windows + R keyboard shortcut to bring out the Run box.
2) Enter ”ncpa.cpl” and open the ”Network Connections” window.
3) Right-click your computer’ network adapter and select ”Properties”.
4) Select your computer's Internet Protocol Version and click ”Properties”.
5) Select ”Use the following IP address” and change the IP address into 192.168.177.12.
And done. Now your IP camera is connecting directly and communicating with your PC, because they are now in the same little LAN.
subscribe my new channel
/ channel
MI (Xiaomi) WiFi camera
amzn.to/36DG9NO
Ezviz WiFi pt camera
amzn.to/38KTlm3
Ezviz outdoor camera
amzn.to/36EDK5n
Ezviz 4camera setup
amzn.to/2RVEpeD
Hikvision video door phone
amzn.to/2sB2I6U
My channel "Yfm security" ,is based normal tecnnical problem which faced by you,
So plz subscribe my channel thank you.
Tiktok
tiktok.com/@yfmkishor
Plz visit my creative blog
www.yfmsecurity.com/?m=1
Mail us for any que....
yourfreshmarketdeo@gmail.com
Join my Telegram
t.me/yfmsecuritychannel
Plz follow us
m. AAmzindagikite...
And
/ kishorkumar5908
#Yfmsecurity#