How to Connect and Operate Sky-Watcher AZ-GTI Mount with ZWO ASIAIR.

No video

How to Connect and Operate Sky-Watcher AZ-GTI Mount with ZWO ASIAIR.

Рет қаралды 7,305

Күн бұрын

#ZWO #ASIAIR #Skywatcher #AZGTI #astrophotography #OmniAZ102
This is the 4th video in the Sky-Watcher AZ-GTi Mount series. I have explained how the AZ-GTi mounts such as AZ-GTi and Star Adventure GTi can be connected to ZWO ASIAIR. The procedure for connecting to ASIAIR Plus, ASIAIR Pro and ASIAIR Mini is similar.
Chapters:
0:00 Intro
2:47 Configuration in SynScan App
6:07 Configuration in ASIAIR
8:30 Test the Connection
9:29 Wrap Up
ZWO official document for connecting the AZ-GTi Mount to ASIAIR:
astronomy-imaging-camera.com/...
My Sky-Watcher AZ-GTi Mount Series:
Part I - Unboxing and Initial Review.
• Sky-Watcher AZ-GTi Par...
Part II - Alignment & Basic Operation with SynScan Pro.
• Sky-Watcher AZ-GTi Mou...
Part III - Converting to Equatorial Mode for Astrphotography with Firmware Update.
• Sky-Watcher AZ-GTi Mou...
Celestron Omni AZ102 Unboxing Video: • Celestron OMNI AZ 102:...
Affiliate link to buy Latitude Base:
amzn.to/3l5tLTA
I hope this video is informative and useful. Please let me know in comments if I missed anything. If you like this video, please consider Subscribing to my channel.
Thanks for watching!
**Disclaimer: This video is NOT sponsored by ZWO or Sky-Watcher.
Music in this video: bensound.com

Пікірлер: 50

@AstroCrescentDIY Жыл бұрын

I have added chapter markers in the video so you can skip any part.

@spookymulder007 9 ай бұрын

Like others have said, I couldn't get this feature to work without your help...Thank you Sir!

@AstroCrescentDIY 9 ай бұрын

Thanks for watching! It takes a few trial runs in the beginning. Just make sure you are using the correct EQMod cable, which is not the same as most common EQMOD cable for Sky-Watcher EQ-6R Pro mounts. It's different as given in description. Next, you need correct settings on both AZ-GTi and ASIAIR. Hope this helps. Clear Skies!

@fordprefect_amiga 3 ай бұрын

Thank you so much for this video! I have not had a working system for months because I couldn't figure out how to set this up!

@AstroCrescentDIY 3 ай бұрын

Thanks! I’m glad that the video is helpful. Clear Skies!!

@toonfan2007 2 ай бұрын

Just a brilliant explanation, many thanks.

@AstroCrescentDIY 2 ай бұрын

Thank YOU for watching!! I’m glad that the video is helpful. Cheers!!

@terrygarbutt5760 4 ай бұрын

Hello: Thanks for your channel and sharing your knowledge. I'm going to be doing the Eclipse next month and in travelling need a light weigh go-to system. I'll be using the AT-GTi with a Canon 6D and 300 2.8L & Sony Qx-1 with the 12-24/2.8 zoom. This article was the secret ingredient to getting my ASI Air Pro working. I recently bought a Seestar for 'insurance'. Will be my 7th and probably final eclipse. Just to note I live north of Toronto. No doubt you will be watching the big event. Clear skies

@AstroCrescentDIY 4 ай бұрын

Thanks for watching! I’m glad that the videos are helpful. I’m sure you will enjoy the upcoming Solar Eclipse event with your setup. Clear Skies!!

@patricehuet9460 2 ай бұрын

Thank you very much for this video which helped me greatly.

@AstroCrescentDIY 2 ай бұрын

Thanks for watching! I’m glad that the video is helpful. Cheers!!

@bonzer2u Жыл бұрын

I have had users ask me how this may be done via wifi to the mount, now I know how thanks to you, much appreciated....

@AstroCrescentDIY Жыл бұрын

Thanks. I'm glad that teh video is helpful. CS!

@lukasznijak Ай бұрын

Great video - Sir.

@AstroCrescentDIY Ай бұрын

Thanks!! I’m glad you liked it. Cheers!!

@LogansAstro Жыл бұрын

Great video. Very useful "how to" for this setup.

@AstroCrescentDIY Жыл бұрын

Thanks for your kind words. Much appreciated.

@kshales 9 ай бұрын

Thanks for your tutorial.

@AstroCrescentDIY 9 ай бұрын

You are welcome!

@uglyoldblindbloke8298 Жыл бұрын

Tnank very much. That helped a lot. I used this method to control my AZ 2i. Works perfectly.

@AstroCrescentDIY Жыл бұрын

Thanks a lot! I'm glad the video was helpful.

@JulioLopez-gs3mu Жыл бұрын

Thank you very much, it's exactly what I needed!

@AstroCrescentDIY Жыл бұрын

Thanks for watching! I’m glad that the video is helpful. Cheers!

@hismasterstelescope Жыл бұрын

Very good how to video. Thanks.

@AstroCrescentDIY Жыл бұрын

Glad you enjoyed it! Thanks.

@danielduesentriebjunior 11 ай бұрын

Thank you for this helpful tutorial. After failing a couple of times (and unnecessarily stretching my patience due to a stupid typing mistake) I succeeded at last coupling the AZ-GTi to my new Asiair Mini. The current ASIAir Android App allows specifically selecting Skywatcher AZ-GTi/Synscan as the mount.

@AstroCrescentDIY 11 ай бұрын

Thanks a lot! I'm glad it helped! Cheers!

@LearnToStargaze 3 ай бұрын

This worked a few weeks ago, but not anymore. Must have been an update, both my ASIairs (mini and pro) stopped connecting the AZ-GTi.

@staceyrob01 Жыл бұрын

Good video - thank you. Currently I use the eqdir cable but I’m wanting to move to a wireless connection from my az-gti to my Asiair mini. I use the Asiair in station mode so I can use it through my home Wi-Fi. Is it possible to use the Asiair in station mode and have the az-gti connect to it wirelessly? Further question if yes! Is it better to connect the az-gti station mode settings to the home Wi-Fi or the Asiair wifi for such a configuration? Is it possible to help me here? Many thanks!

@AstroCrescentDIY Жыл бұрын

Thanks for watching. I'm glad that the video is helpful. I have not tested two station modes together. That's why I preferred to use the EQMod cable from AZ-GTi mount to the ASIAIR Mini. This will allow the ASIAIR to run in Station Mode. Just a reminder that the EQ Mod cable for AZ-GTi is different that the one for EQ3, EQ5 and EQ6 or their Pro models due to pin configuration. Cheers!

@staceyrob01 Жыл бұрын

@@AstroCrescentDIY understood - thanks. I have the cable route working fine. With my dslr I’m already using all 4 usb ports on the ASIAIR, so could do with freeing one up, if I want to add an EAF in future. (Currently have dslr, mount, guide cam and memory stick using the slots).

@AstroCrescentDIY Жыл бұрын

A cooled Astro camera will give you 2 extra USB ports. An option to consider.

@mikewarkentin8736 3 ай бұрын

If you have the EQMOD cable connected do you need to do anything with your previous configuration of ASIAIR and Synscan to enable it to work, or can you just plug in the EQMOD cable and you are good?

@juliorgoni Жыл бұрын

Congratulations for all your videos, are wonderful. I have a question. Is it possible to use ASIAIR with the AZGTI as altazimutal mount and just a basic planetary camera like ASI224MC in order to do EAA in the most simple way?

@AstroCrescentDIY Жыл бұрын

Thanks for your kind words. I'm glad that the videos are helpful. Reg your question, I have not tried it myself. But, you might want to check out this video from Sky-watcher: kzfaq.info/get/bejne/fsp2p5OEyJaWl6c.html Another article on this topic: telescopemount.org/asiair-pro-on-alt-az-mount-part-1-how-to-set-up-the-system/ Hope these are helpful. CS!

@juliorgoni Жыл бұрын

@@AstroCrescentDIY thank you very much!!!

@drkumarharaprasadmisra5562 Жыл бұрын

Great video Sir, by this tutorial i could successfully connected my orion alt az mount with the asi air plus.

@AstroCrescentDIY Жыл бұрын

@@drkumarharaprasadmisra5562 Thanks. I'm glad that the video was helpful. Cheers!

@drkumarharaprasadmisra5562 Жыл бұрын

@@AstroCrescentDIY for tracking should I have to star alignment prior to connecting to ASI Air?

@spookymulder007 10 ай бұрын

I cant find your video where you use a cable to connect the asiair? please can you help me locate it?

@AstroCrescentDIY 10 ай бұрын

Thanks for watching. All cables and connections of AZ-GTi to ASIAIR are included in this video: kzfaq.info/get/bejne/iNOAl82XvrTdpI0.html Please skip to Part 4 in this video at 16:26. EQMod Cable for AZ-GTi: amzn.to/42BBv0r Hope that helps. CS!

@diogenes505 3 ай бұрын

Can the Az-Gti be used as Alt-Az mount with the ASIAIR?

@AstroCrescentDIY 3 ай бұрын

Thanks for asking! Yes, of course. Cheers!!

@mustang5132 Жыл бұрын

Hello, I’ve followed all the steps but I seem to be encountering a problem. When I change the wifi settings, and I’ve tried this three times following the instructions, it shows me a blank screen with a button in the middle saying “READ SETTINGS”. When you click the button nothing happens. When I tried to then connect the ASIAIR to the gti, it searches for a while before saying that I have to make sure my mount is connected or that I use a cable. Is there anything I can do about this or do I need to purchase the cable too? Also what is the threading for the AZ-GTI counterweight bar. I have one for a lighter setup but would like to get a longer one. Is it M10 or M12?

@AstroCrescentDIY Жыл бұрын

First, thanks for watching the video. 1. The screen on SynScan that says 'Read Settings' after configuring the Station Mode is normal. Just ignore it and connect the WiFi of your phone or tablet to ASIAIR WiFi. Then launch the ASIAIR App. At this point, you need to select the EQMod mount from within the WiFi symbol and not from the first main interface of ASIAIR. The main interface of the ASIAIR will show the mount that was previously connected. Also, set the correct Port Number (as set in the SynScan App) and Baud Rate (as shown in video) along with Port Type as UDP. 2. No, you don't need to buy the EQMOD cable if you are connecting through the SynScan App. But if you decide to buy one, make sure it s specifically for AZ-GTi mount. The EQMOD cable for Sky-Watcher EQ5, EQ6, etc. is different. In this case, you will not need the SynScan App. I'll cover that in an upcoming video. 3. The thread size for AZ-GTi counterweight bar is 12mm (And not 1/2 Inch). I myself purchased a 3 ft long 12mm threaded bar and then cut it to about 13" length. Hope all this info helps. CS!

@mustang5132 Жыл бұрын

@@AstroCrescentDIY okay I will try again but I think something is wrong with my GTI since it’s still not connecting. Hopefully it works this time. If it doesn’t, I’ll get the cable and make sure it’s the right one. And great. I was looking for one that was between 30-50cm since mine is only around 20 and couldn’t find one. Cutting it in half will definitely make that easier

@mustang5132 Жыл бұрын

@@AstroCrescentDIY also thanks for this great step by step tutorial. I couldn’t find any other straight to the point video explaining the setup for this. Can you make a video explaining other basic functions of the ASIAIR like polar alignment? I enjoy your explanation style very much. Thanks again!

@AstroCrescentDIY Жыл бұрын

You are most welcome!