How to unplug USB 3.0/3.1/3.2: kzfaq.info/get/bejne/hJmUd9iZnNO9Y40.html How to plug in USB 3.0/3.1/3.2: kzfaq.info/get/bejne/ibWHaq6W1L2wl40.html How to unplug USB 2.0: kzfaq.info/get/bejne/l7CVgcpl0pfKXXU.html How to plug in USB 2.0: kzfaq.info/get/bejne/pLWjacea1Z-1YZ8.html

Thank you! PC build videos keep skipping over this because they assume it speaks for itself I guess. I've been so confused trying to find how USB cables work

thank you so much, i cleaned my case 3 days ago and now i was trying to figure out why the usb in the front weren't working, knowing i had forgotten to plug something you gave me the solution in the first minute, the thing wasn't connected correctly😭

*What have we learned here today?* We learned that a 9-pin F_USB port on the motherboard is really a USB 2.0 connector for the two USB 2.0 ports located on the front of the computer. Not where the motherboard is sticking out with all of its other ports, but rather the USB 2.0 ports located elsewhere on the desktop, such as on top of its outer shell. That's what I got from this video and my tests afterwards.

Thanks so much man this helped a lot you don't even know how much this video helps great job. I liked and subscribed

Problem with some mobos is that they don't have same number and position of pins like on motherboard!!

you should record connecting pin by pin ,there are still plenty of older cases that have USB connector"broken" in single pin/wires.

Very thorough and clear explanation. Would also love to see what happens at the other end of the cable. Also it would be interesting to see the situation, when there there are no pins on the motherboard, but a more or less regular extra internal ("+1) connector on the PCI USB card.

Hi, I need to replace those cables and the pcb too. I can’t find that piece anywhere. Can you help me?

Do u have tutorial for individual connectors on where to plug them 1 by 1? I accidentally fried my thumb drive & external hard disk maybe coz i messed up connecting them 1 by 1.

Great video, thanks! Question: In your first and third examples, you used the third USB connectors (FUSB3 and JUSB3) and in the second example, you used FUSB1. I assume this means that if a motherboard has several USB connectors that I can choose any of them at random? Thanks again!

Ok I'm bout to make my first pc so the headphone jack and the power button and USB on cables come with the computer case right? Then you find them and plug it into the motherboard

This is great! Now i know where are my USBs!!

I had 2 USB port in front of my PC. But in my motherboard it shows F_USB1/2/3 and it only works 1 side of USB port front PC. Is there any tutorial to make both works? Thanks

i notice that in all your examples, you only connect to one connector does that power up both usb ports in the front panel? (i assume you have two)

Ok iam a newbie, can u tell me what are the importance of these connections

Where should i find this cable i dont have this cable

Today a Repaired an HP Tower the USB internal Cables was Single Row only atached to MB ? but works Great 2.0

easy peassy now what about the system that have individual connectors instead of the der block connectors

hello, good morning, what is the connection on the JLPC motherboard for?

thank you for this and the different mobos :)

so basically, you're taking the cables from the case and connecting them to the ports on the motherboard, right?

My motherboard has USB_3_4 and USB_1_2 which one would I plug it into?

hello! i have a really old pc case unfortunately, and i really cant find any videos on how to connect the usb ports in 😅 i have a cable with 2 vcc plugs, "vcc1" and "vcc2". are these the usb cables? and if so, can i just plug them into the usb slot on the mb? they also have 2 ground plugs and 1 shield plug, but idrk what to do. cheers!

My cooler master is not showing USB cables I am going to have to do research on this. I am struggling on this part all other appropriate cables are connected. I am quite new to computer building to evade pre built computers and I am reading all the manuals as well how do I find USB cables without labels am I doing something wrong?

Hi. I've connected the usb connectors for my front panel, but aren't working. I installed the necessary drivers and nothing seem to work. Please help thanks!

I got a 4 pin usb connector for my front panel, and on my new motherboard, JUSB1 has 9 pins, I looked online for an adapter but im having trouble finding what i need. Can someone help me out?

i plugged my in but the usb ports wont work mabye i need to check they are properly inserted

What happens if it you don’t get a usb cable like that?

So i recently got my PC back and my USB and plugs werent able to be connected to my mother board again as they had to use a different chassis after for the repair. How would I go about this and what would I need to buy for this? An adapter for sure, but I am a noob when it comes to all things PC xD

Are the father USB cables from the case (front pannel)?

I have them on my Gigabyte Aorus Elite motherboard also. I don't have a cable to connect to them. What are they on my board for, please? I have a F_USB1 AND F_USB2. What is their function? Thanks!

I wish it was that easy for me, i found a brand new case but the usb wires that come from the front panel do not come in a pre made plug like that, mine are data 2, data 2, vcc 2 and ground, i have no way of knowing where those wires go.

I'm trying to connect a usb 1 front input onto a usb 3 slot on the motherboard. Will this work?

My case usb plugs are slightly too big for the usb pins i don't get it at all.

I have 2 USB cables to connect - one from my CPU cooler and one from my USB slot from the tower/case. Can I put one of the cables in to the COMs port as they seem to have the same pin layout?

I cant find the small usb cable, for usb 2, help!

Do motherboards include these cables?

Do both USB 3.1 gen 1 and USB 3.1 gen 2 share the same header on the motherboard?

I got a pre built and I’m trying to figure out why both my usb headers are used up. I need one free to install some more fans with a hub Does anyone know why both would be used up

have connected the usb to front panen in usb1 but when i plugged in my keyboard nothing happen. it suppose to light green on keyboard if there is signal.

Can somebody help me? Mine USB port cables dont have 2 row with 1 blind hole, but 1 row with 5 holes (two 5x1 individual connectors). And there is 2 of those same cables, individual, for 2 usb ports and idk how to connect them to 2 row pins... Please help.

Good video! Thank you for the help.

Thanks for the video :D

I have a inwin303c. I have a wireless mouse plugged into the front usb 3.0 which works fine, but when i also plug in a usb hard drive in the other usb 3.0 on the front case then the mouse stops working or becomes very laggy. I tried a couple different mice and usb stick combos and this happens when both r plugged in as well as data transfer. Does this happen to anyone else/is my case defective?

I have a 9 pin cable but my motherboards usb slot only has 5 pins. What do I do? Do I need an adapter?

thank you so much for your help

What if it doesn’t have any casing to help plug it in easily?????? Please reply fast

Where is the other end connect? During replacing my motherboard and it just fell out

whats the need of a usb header on the motherboard?i thought all we need is a usb card to provide the interface for usb connection to our motherboard

On a USB 2.0 capable motherboard - is a USB 2.0 header the same (connector wise, Female) as a USB 3.0 (Female) header? I have 2 x USB 2.0 ports on my tower (with the connector inside) that's attached to a USB 2.0 port on the mobo - what I'd like to know is, can I connect the old USB 2.0 (tower) header connection to the new USB 3.0 header port on the new motherboard? I know that if it can connect, I'll get full USB 2.0 [transfer] SPEEDS from the new USB 2.0 port externally on my Fractal Design Define R3 tower but it won't be actually operate as a USB 3.0 port - is this 100% correct? Please advise, thanks; I just want to be absolutely sure I can re-use the existing USB port (often just for flash drives). I'm not bothered about it not being an actual USB 3.0 port, all I care about is if it can be re-used as _A_ USB port. Old mobo = Asus P6T (vanilla) from about 2010. Intel i7. New mobo = Asus X570 TUF Gaming, 2020. AMD Ryzen :)

can you help me i have a old hp moobo and the conectors are not compatible

my moyherboard has USB F with 10 pins (8 then 2 slots without pins, then 2 more pins) how does it work ?

Where do you get the cables?

I feel like mine don't go in all the way and I don't want to crack the motherboard

Is it possible that one single plug (which is made from 2 thick flat wires) connects both USB 2.0 and USB 3.0 ?

wait so when usb 2.0 should i connect f_usb 2 ? or anywhere that says f_usb 3

I do not know how to connect the 8 holes in the USB Pins. The holes are 1 Port+ 2 Port+ 3 Port- 4 Port- 5 + 6 + 7 - 8 - What to do with that? Please help me!

Is there a thing for case 2.0 to motherboard 3.0?

That cable management...

So lucky. You have 3. I can only use 2 of 4 front panel usb's. The slot is for my card reader.

My USB 2.0 connector and hdaudio connector have so much resistance. Matched them up to the key and they refuse to go in. I have no idea why.

0:09 Why are they clearly USB 2.0 please?

I have HP 600 G1 motherboard.I cant find the difference of USB ports

Jcom1 = usb?

Where do u plug the other end of the cable into

where does the other end go?

Why i don't have a usb cable?

Nice tut!

how to connect front jack in motherboard

Thank you . Very good. Thx for doing three motherborads

Mine say usb_1_2 I don’t know if it is f_usb

Thank you !

You're a life saver. Thank you!

Thanks for sharing, GBU

i have a ac97 front panel how do i connect this

You kinda sound like Korg from Thor xD

Thank you for your video, but I installed a outside power/reset buttons which is made by China and the USB cable doesnt even have a blank shitty hole (all 10 holes) so I have no way else to guess. My question is: 1) can I guess based on the colors of USB cable, like Red - White - Green to stick correctly? Like in 3:25 in your video? 2) above the name of the cable, there is a small arrow (or triangle) symbol, is it useful or any meaning or just randomly for fun?

Thx

Mine has usb1112 and usb 910

ive searched my entire case and the cords, but i cant find that usb cable

ok... for dumbs!, but, what if our case has each pin cable separated?, which pins ground + -, etc?

Thank u broo

Thnx bro

thanks thanks

thanks :3

😶 turn on the electric switch and boom ur now a chicken :| roast 🔥🔥🔥🔥🔥🔥.

It won't fit in, it is definitely the right header and port but it won't fit!

I have a problem, my pc case (corsair spec05 ) it doesnt have the usb cable, it came apart, in a bag, its like 15 cm and i dont now were do i have to plug it in, if someone knows how to, dm me on discord CoUsCo#9204 or coment my coment, the motherboard is b550m vdh and its all new

Why can’t you just show me front panel and not usb

What is that cable management!!!!!

It doesn’t fit in

I have some USB connectors wich have 12 pins???? First a 2x4 row, then 1x2 empty and then two pins at the end.. Idk whats going on with my mobo... : : : : _ :

Top

so I watched a video to install bluetooth and wifi to my Hackintosh. Ill link the video so you can see. He say "if only wifi works to flip the connector 180 degrees" this is where I get lost. I only have one USB port left on my mother board and there is only one orientation it can go in so what does he mean by flipping it???? watch his video not very long and maybe you can help me understand what he means Thank You? kzfaq.info/get/bejne/jMpppqeppr2ypY0.html

Lol I have a 300$ mbo and only 2* usb

4 minutes and 20 seconds

im liker 1000

Russian accent

really useless