How to connect TouchOSC to your Computer using a hardwire connection.

No video

How to connect TouchOSC to your Computer using a hardwire connection.

Рет қаралды 7,278

fromstudiotostage

Күн бұрын

Пікірлер: 37

@NickFromNetherlands Ай бұрын

Tim Corpus is pointing in one of his videos that the bridge is not needed for Midi over USB. ???? I think you have to use virtual ports Loopmidi for that.

@yodycastro Жыл бұрын

Thanks a lottt for this video, very useful!

@michaelironstone 3 ай бұрын

I don't see as an option. What should I do??

@Nagazaki_hc 2 ай бұрын

@jonathandurand9939 Жыл бұрын

Hi ! Thanks for your tutorial. It's priceless 😊 Now my Ipad and my labtop are connected via Touch osc (when I touch my Ipad it TouchOSC software is responding). Unfortunatly, live Ableton 11 doesn't. I followed your advices and Live still not receive the midi messages. Have you got an idea ? Thank you for your help ;)

@IIFOXIESII Жыл бұрын

Hey hey, has anyone been able to use Touch Osc through the Playaudio12 host port to control both comps in the redundant setup? I can't get touch osc to work through the host port at all.

@Chancholoraq 2 жыл бұрын

Thank you for these awesome videos! I followed the directions for this, but I have a huge huge problem. I have both the desktop and iOS version of touch osc. I have seen KZfaqrs edit their template on their desktop, and see it updated live in their iPad. I can’t find anywhere how to do this, and it’s been mind boggling. After I make the bridge and midi connections on both devices, how the heck do I mirror the two applications? It’s been so frustrating, I appreciate any help you can give me!

@ChrrZ Жыл бұрын

you need to setup the desktop version as server and the tablet as client,

@felipepinaud 7 ай бұрын

Hey Will! I have watched your TouchOSC course. I couldn't figure out a way to connect touchOSC from my Samsung S10 Phone to MacBook Pro M1 via USB... Is it possible? TouchOSC doesn't see USB connection on the phone app setup.

@user-mn6gc7xh4r Жыл бұрын

Thanks for this video! Can you use touchOSC with multitracks playback instead of ableton live?

@sergiofilho7845 Жыл бұрын

Thanks for your video brother, i couldnt find anything about it maybe you can show me the light, im using windows PC and i have an IPAD is possible make it work ? i did following your steps but seems windows do not recognized IPAD as a peripheral or something to make it work.

@gofelriebenschmalz6687 Жыл бұрын

this only sends midi messages over usb if i understand correctly. is there a way to send osc messages over usb? for some stuff the midi resolution is too low but when i use osc over network i have a pretty bad delay.

@burmy1552 7 ай бұрын

Anyone been able to get touchosc on an android to send midi to external hardware? I can get it to send to my computer over usb via the bridge but I can't get any signals out to any external gear. I tried various methods getting it to go through my computer and back out and failed at that too.

@Noe2trentemoult Жыл бұрын

love your video, those you have a solution to control a rotary/fader that as an automation on it. every time i do it, the automation get disabled, even when i dont touch the rotary/fader. Thank

@Noe2trentemoult Жыл бұрын

i've found it finnaly, you juste need to trigger the midi message when the object is touch, not whith the X value

@Sullys-eu Жыл бұрын

done this on both samsung A10 and LG thinq and cant connect via wire. Not finding in searching in bridge tab. So andorid to windows 10 wont work or I'm doing something wrong

@ArshabWisher Жыл бұрын

Hey, i assume you want to send MIDI from TouchOSC to your PC (Windows)? 1. Connect your phone via USB 2. A notification should pop up on your phone where you can set the type of USB connection (i'm on Android 12, but i think this should work from Android 6+) » Select MIDI (on my PC, Windows began to install drivers. In Windows "Device Manager" under "Sound, Video and Game Controller" i can find a new device called "MIDI function") 3. Open TouchOSC and click on the "Connections" icon left beside the wifi icon 4. Open "MIDI" tab 5. Enable Connection 1. Now if you click on "Browse" you should see "USB-Port for Android" If not, try to enable "Flight mode" and restart TouchOSC. Also note that this works for MIDI only, not OSC. And i think you should have TouchOSC bridge installed. If you right-click on the icon in systray, you should also check "Enable USB Connections".

@ChrrZ Жыл бұрын

i had the same issue, the solution was to switch the usb connection mode to "USB tethering" in the android settings, the default was "usb filetransfer"

@MrPMOSullivan Жыл бұрын

@@ArshabWisher thanks. Missed this so late replying. I'll Give it a shot

@MrPMOSullivan Жыл бұрын

@@ChrrZ thanks. I'll try when i get home

@ZacharyScottBeats Жыл бұрын

@ChrrZ wait, so it IS possible to use TouchOSC over a usb cable with an Android tablet? My initial understanding has been that TouchOSC works with iOS over usb, but not Android.

@dj_toleex Жыл бұрын

It work with Android devices and Windows?

@fromstudiotostage Жыл бұрын

Yes

@dj_toleex Жыл бұрын

@@fromstudiotostage but how i can connect?

@ArshabWisher Жыл бұрын

@Hellemmm Ай бұрын

@@ArshabWisher and whats next?

@ArshabWisher Ай бұрын

@@HellemmmThen you can load a templage. On your PC you should see some MIDI signals going in.

@Chancholoraq 2 жыл бұрын

Thank you for these awesome videos! I followed the directions for this, but I have a huge huge problem. I have both the desktop and iOS version of touch osc. I have seen KZfaq’s edit their template on their desktop, and see it updated live in their iPad. I can’t find anywhere how to do this, and it’s been mind boggling. After I make the bridge and midi connections on both devices, how the heck do I mirror the two applications? It’s been so frustrating, I appreciate any help you can give me!

@ArshabWisher Жыл бұрын

Still have problems? I have setup this Android and Windows, but i think iOS works identically. Lets assume your server is on the desktop and the client on mobile. First open TouchOSC on both devices. On the desktop: 1. Click on the wifi icon in the menu bar 2. Open the "Server" tab and enable the checkbox On the mobile: 1. Click on the wifi icon in the menu bar 2. Open the "Client" tab Now TouchOSC automatically shows all available servers found on the network. Just click "Connect" and the magic happens :) Note: both devices have to be in the same network!