How to control 2 DC motors with ESP32 and L298N with mobile phone and Blynk app

Рет қаралды 14,103

Күн бұрын

Today I will show you how to control two DC motors with forward and reverse direction with ESP32 and L298N modules, using mobile phone and Blynk app to move forward and reverse.
Please like and subscribe ‪@FixitEasyDIY‬
Here is a link with wiring diagram and Arduino code: drive.google.com/drive/folder...
#ESP32
#blynk
#IOT
------------------------------------------------
More from @Fixiteasy ↙️↙️↙️↙️↙️↙️↙️↙️↙️↙️↙️↙️↙️↙️↙️↙️↙️
DIY portable Smoke / Fog Machine | Tons of smoke from old hairdryer
➡️ • DIY portable Smoke / F...
How to power Phone Forever Without Battery
➡️ • How to power Phone For...
DIY Spy Mic - How to build and test in real life | Ultra long distance microphone
➡️ • DIY Spy Mic - How to b...
DIY ultra long range WiFi directional antenna using thin can and old router
➡️ • DIY ultra long range W...
DIY Spy Microphone from old light Bulb - Listening trough walls with this mic
➡️ • DIY Spy Microphone fro...
How to control 2 DC motors with ESP32 and L298N with mobile phone and Blynk app
➡️ • How to control 2 DC mo...
DIY Electric Screwdriver from old PC mouse and vape cigarette with reverse switch and type C USB
➡️ • DIY Electric Screwdriv...
DIY Night Vision Camera from Old Phone
➡️ • DIY Night Vision Camer...
DIY spot welding machine from old microwave transformer
➡️ • DIY spot welding machi...
DIY regulated power supply with Buck Boost ZK-4KX module:
➡️ • DIY regulated power su...
DIY Work Light using power tool battery
➡️ • DIY Work Light using p...
DIY Bluetooth speakers with Class-D amplifier
➡️ • DIY Bluetooth speakers...
PARKSIDE Portable Power Station with X20 battery
➡️ • PARKSIDE Portable Powe...
DIY battery powered Power supply using RIDEN RK6006 and 18650 batteries
➡️ • DIY battery powered Po...
How to connect Stepper motor with 6 wires to 4 wire driver / controller
➡️ • How to connect Stepper...
DIY ultra long range Mic from Satellite dish
➡️ • DIY ultra long range M...
DIY Brushless BLDC motor from old CD-ROM drive
➡️ • DIY Brushless BLDC mot...
And many more ! :)
Chapters:
00:00 Showing ESP32 Az and L298N module
01:00 Wiring
04:54 Blynk setup
06:46 Arduino work
07:23 Testing

Пікірлер: 33

@user-sp1vt6oq8f 6 ай бұрын

Thank you sir bohot bohot sukriya is vdo keliye bohot help mila isse mereko

@peacemaker5909 4 ай бұрын

I'm using this for wheels for a model plain which can be controlled by phone 📱 by blynk app and thought esp 32

@FixitEasyDIY 4 ай бұрын

Me too in one of my projects. Nice thing to have is this motor driver.

@KnightBear123 3 ай бұрын

Can i use different wifi? I mean wifi 1 for my car and wifi2/internet data for my phone is it work?

@FixitEasyDIY 3 ай бұрын

Unfortunately not. The wi-fi will be occupied by the car's network.

@chxcha6 2 ай бұрын

hi sir i want to ask question, if the battery used is 12volt for the driver, should i connect esp with the usb also or is it not necessary because the 12volt is enough to power esp ?

@FixitEasyDIY 2 ай бұрын

ESP 32 requires 5V input power. You need to power it with 5v and separately the Motor driver. This one has 5v output for it

@user-fz6ko2bt9g 5 ай бұрын

neat job! can you do it with ESP8266

@FixitEasyDIY 5 ай бұрын

Thanks 👍 It should be pretty much the same. I just like ESP 32 ;)

@fiqielzbukanmanusia3301 8 ай бұрын

how about esp wroom-da module

@FixitEasyDIY 8 ай бұрын

It would work the same ;)

@sanjalshetty6120 Ай бұрын

I can add only 5 data stream 😢 can guide me pls

@FixitEasyDIY Ай бұрын

I guess you have been using the Blynk credits for some other project. Try register new Blynk and it should work.

@mohammaddarr4017 7 ай бұрын

It is a great video, can you please guide on how to use LCD here to show the set point of the dc motor as well?

@FixitEasyDIY 7 ай бұрын

To be honnest I could try to make it, but I am not sure right now how to do that exactly. ;)

@mohammaddarr4017 7 ай бұрын

@@FixitEasyDIY it is okay, actually I have a project on this and that is why I asked you to do it.

@vh.h Ай бұрын

У меня ест вопрос, вазмажна ли управля ету канструкцию (механизм) через какойто пулть? (Ты исползовал приложение) Который самому собрать можно.

@FixitEasyDIY Ай бұрын

Yes that's right. This application is Blynk and you can assemble it as you like. It works through WiFi

@peacemaker5909 4 ай бұрын

How to use it for free

@rafiabrar4511 3 ай бұрын

Sir I need the code

@FixitEasyDIY 3 ай бұрын

Here is a link with wiring diagram and Arduino code: drive.google.com/drive/folders/1ZJWje165Ki-BPlnqtT2YS1kQPiX_oMQR?usp=sharing

@ashishdubey8136 11 ай бұрын

Can you provide a code

@FixitEasyDIY 11 ай бұрын

Here is the wiring diagram and Arduino code: drive.google.com/drive/u/0/mobile/folders/1ZJWje165Ki-BPlnqtT2YS1kQPiX_oMQR?usp=sharing&pli=1

@ashishdubey8136 11 ай бұрын

@@FixitEasyDIYThans buddy love from India 🇮🇳

@TzuyuTT Ай бұрын

Max 5 datastream for free..how you can get 6??

@FixitEasyDIY Ай бұрын

Honestly I don't know 😔

@loydshaju7120 4 ай бұрын

is blynk free to use

@FixitEasyDIY 4 ай бұрын

I am using it for free :)

@peacemaker5909 4 ай бұрын

How

@peacemaker5909 4 ай бұрын

How to use blynkfor free without subscription

@FixitEasyDIY 4 ай бұрын

Honestly I don't think it's possible. Subscription is free, at least for some similar projects. I used free accounts for this project.

@siddharthkoppu6901 2 ай бұрын

Code for 4 motors

@FixitEasyDIY 2 ай бұрын

Its the same 2x2