Рет қаралды 4,333
Free Download Project Code and Simulation From Our Website:
mytrained.com/...
The most important point is you should know how to received and transfer data from mobile to raspberry pi and vice versa by using Bluetooth.
If you can any doubt in programming and hardware connection ,contact me ::
Mobile Number ::9922512017
MailID ::Rahulj23101993@gmail.com
Command::
Below command are compulsory to execute to get access of Bluetooth
1.sudo apt-get update
2.sudo apt-get upgrade
3.sudo apt-get install bluetooth blueman bluez
4.sudo pip3 install bluedot
5.sudo pip3 install bluedot --upgrade
6.sudo apt install pulseaudio-module-bluetooth
7.pulseaudio -k
8.pulseaudio --start
9.sudo reboot
In Case your raspberry pi doesn't show Bluetooth icon then only you should use below commands otherwise you dont require below command::
1.sudo apt-get install pi-bluetooth
2.sudo apt-get install bluez bluez-firmware
3.sudo apt-get install blueman
4.sudo usermod -G bluetooth -a pi
5.cat /etc/group | grep bluetooth
Link::
LED Control using raspberry pi::
• LED with Raspberry pi ...
IR Sensor with Raspberry pi::
• Interface IR Sensor Wi...
Python Basic Series::
• Web Application Develo...
Drive link::
drive.google.c...
Copyright Disclaimer under section 107 of the Copyright Act of 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research. Fair use is a use permitted by copyright statute that might otherwise be infringing.”
Regards,
Rahul Jadhav