No video
HOW TO CONVERT A BRUDER SKID STEER TO RC!
Рет қаралды 21,181
Күн бұрынEver wonder how these toys are controlled? Well in this episode I break down how I converted this skid steer to a full RC skid steer.
**Where to buy these**
amzn.to/2KZ6GNz
Let me know if you have any questions.
Also, I would like to give a big shout out to this person for all the guidance on how to do it.
Unfortunately the link to the build is no longer available.
thanks again for all the help SteinHDan
Bruder 3d printed parts are available here.
www.shapeways....
If you have any questions or want to know more leave a comment below.
~-~~-~~~-~~-~
Please watch: "(16) Amazing Hydraulic RC Wheel Loader Filling Up Truck With Dirt! "
• Real or Fake??? Does T...
~-~~-~~~-~~-~
@R.C.A.D. 3 жыл бұрын
Very Cool! Great walkthrough my friend.😊🤜🤛
@RCConstructionHobby 3 жыл бұрын
Thank you 👍
@scaniamorten7821 Жыл бұрын
How is the servo mounted on the bucket 🤔🤩 looks great 🤗
@RCConstructionHobby Жыл бұрын
Well it has been modified so that the bucket servo is attached to a 3dprinted bracket. And the boom is also attached to a 3dprinted bracket. Check shapeways.com and search steinhdan and he has a modified bracket for the bucket servo.
@azrcgold7778 5 жыл бұрын
This is awesome!!!!!Would love to get step by step instructions!
@RCConstructionHobby 5 жыл бұрын
go to this site and the step by step is there to follow. that is what I used to build mine. www.rcsparks.com/forum/threads/bruder-delta-loader-rc-conversion-w-embedded-pc.36063/
@pnwRC. 5 жыл бұрын
I as well have some DIY videos on my channel that detail how to convert the Bruder toys to RC. Perhaps you'd enjoy seeing them? Those videos are buried way down the list near the beginning videos on my channel. kzfaq.info/love/_jBXcfmjh1FYs7UsG7eixw?view_as=subscriber
@g.aslifestyle 4 жыл бұрын
Could you build one for me I’ll buy pls
@dennisfreitas7675 3 жыл бұрын
Hi can I get the step by step video for this please and thanks
@caterpillart5662 2 жыл бұрын
@@RCConstructionHobby hey i clicked on the link and it says not found
@hobbyrc4651 2 жыл бұрын
So I want to try this but where did you start, is this a good starter project on converting to rc. Didn’t want to spend too much just in case I mess up? Thank you! Love your vids! Big fan!
@RCConstructionHobby 2 жыл бұрын
I would say this is probably a second conversion. Maybe start on the D5 dozer. It is easier to convert. This skid steer is a little more advanced. I am making an easier one but still will cost more than the Bruder D5 dozer
@hobbyrc4651 2 жыл бұрын
@@RCConstructionHobby thank you I’m sure I will have more questions lol! Is the huina 580 a beginner rc?
@RCConstructionHobby 2 жыл бұрын
Yes I would say the huina 580 or the volvo ec160 from double ee is also a good one.
@caymanite_rc_construction 2 жыл бұрын
The link for the drive gear in description. Is the gear is already printed or is that price just to buy the file so I can print it ? Would like to be able to buy them pre made for my conversion.
@RCConstructionHobby 2 жыл бұрын
All the links are to buy the printed parts. You pick the material and shapeways prints it for you.
@caymanite_rc_construction 2 жыл бұрын
@@RCConstructionHobby thanks man just started on my delta loader today after finishing up the d5 build
@markvandenburg6370 8 ай бұрын
What rpm did you choose for the drive motors?
@RCConstructionHobby 8 ай бұрын
The model of motor only comes in one speed. It's around 200rpm.
@markvandenburg6370 8 ай бұрын
@@RCConstructionHobby thanks, that will help!
@kieranb1275 3 жыл бұрын
Hey dude planing to do one of these my self do you know were you brought the motors from (i may have missed it in the video)
@RCConstructionHobby 3 жыл бұрын
Amazon sells the motors. Look for yeeco dual shaft motor www.amazon.ca/dp/B07CJZ58G5/ref=cm_sw_r_cp_apa_fabc_uKTYFb8RKEJ8B
@kieranb1275 3 жыл бұрын
Thanks dude huge help ive got my radio gear and servos just need to order the rest also why do you need dual shaft motors instead of single
@The1badxj 4 жыл бұрын
great video, thanks for posting this, i have a large collection of Bruders i want to convert,
@RCConstructionHobby 4 жыл бұрын
Thanks for watching. I do think that you can convert them! just be confident and always be open to making mistakes. its a learning experience. But watching others make them does help! good luck!
@caterpillart5662 2 жыл бұрын
hey is their a way to buy them from you? im very bad at wiring things.
@RCConstructionHobby 2 жыл бұрын
Sorry I don't make them for other people but if you go o facebook there are people who make them for others. Check norstates rc construction
@caterpillart5662 2 жыл бұрын
@@RCConstructionHobby ok thanks because i think that the wirring is to much for me
@dennisfreitas7675 3 жыл бұрын
So where do you get the control board
@RCConstructionHobby 3 жыл бұрын
Robotshop.com
@lsmaxxed 4 жыл бұрын
Great video! How much did it cost you to build the tracked skidsteer?
@RCConstructionHobby 4 жыл бұрын
Hey Ismaxxed out. for me it cost between $400 without a TX/RX. add another $100 for that. but its roughly the cost. It does not include my time to make it which is priceless ;)
@lsmaxxed 4 жыл бұрын
@@RCConstructionHobby not bad at all, what's the tx/rx?
@rcchbuilds 4 жыл бұрын
@@lsmaxxed transmitter and reciever. The remote control part
@dennisfreitas7675 3 жыл бұрын
so i was looking at the site for the board what came up is the 5a r/c 6-18v is that it again thanks for your help
@RCConstructionHobby 3 жыл бұрын
i believe that is the correct one. here is the link www.robotshop.com/en/dimension-engineering-sabertooth-dual-5a-regenerative-motor-driver.html
@dennisfreitas7675 3 жыл бұрын
@@RCConstructionHobby thanks for the info so where did you get the connect the servo to the main arm
@RCConstructionHobby 3 жыл бұрын
Do mean where on the arm does the servo connect? Or how is the servo connect to tge arm?
@dennisfreitas7675 3 жыл бұрын
@@RCConstructionHobby sorry bad wording. I mean the part from the servo to the main arm
@dennisfreitas7675 3 жыл бұрын
So is the BEC part of the control board or is it a separate item
@RCConstructionHobby 3 жыл бұрын
Yes the bec is separate. It is its own item.
@dennisfreitas7675 3 жыл бұрын
@@RCConstructionHobby where can i get one from
@RCConstructionHobby 3 жыл бұрын
I bought mine from Amazon. Search hobbywing 3a ubec. You can get 2 for $8.90
@dennisfreitas7675 3 жыл бұрын
@@RCConstructionHobby thanks your help
@dennisfreitas7675 3 жыл бұрын
hi again sorry for so many question but do i have to use a esc as well
@Sniperskillz 2 жыл бұрын
Can you make a step by step instructions with parts list?
@RCConstructionHobby 2 жыл бұрын
I will be making a new video soon with a whole new build.
@Sniperskillz 2 жыл бұрын
@@RCConstructionHobby thanks
@francymotoable 2 жыл бұрын
Come posso trovare la scheda per controllare i motori?
@pat6557 3 жыл бұрын
Hello, can you tell me how to connect the Sabertooth to the receiver?
@RCConstructionHobby 3 жыл бұрын
Yes you will take the fwd and turn servo wires and connect them to channel 1 and 2 or 3 and 4. Depends which stick you want to do the movements. Keep in mind if the tracks are not spinning the right direction you might have to reverse one of the channels or switch the pos and neg on one of the motors.
@pat6557 3 жыл бұрын
@@RCConstructionHobby I will test ... thank you
@flatbedtrucker 2 жыл бұрын
Hey do you know if the build thread is still available I can’t get the link to work Thanks
@flatbedtrucker 2 жыл бұрын
Found them on shapeways do you have any info on the motors Thanks for making this video
@RCConstructionHobby 2 жыл бұрын
The build thread was removed a year or 2 ago. The motors are from Amazon. They are yellow and have 2 output shafts on each side. You would cut one side off. Yeeco motors.
@flatbedtrucker 2 жыл бұрын
@@RCConstructionHobby thank you
@jiraphatsempian6497 4 жыл бұрын
Can you show me how to convert an excavator please? Thanks
@RCConstructionHobby 4 жыл бұрын
one day I will be able to convert an excavator. just waiting on parts.
@dennisfreitas7675 3 жыл бұрын
so the link to the rc sparks does not work
@RCConstructionHobby 3 жыл бұрын
It was taken down. It no longer 3xists. I will make a new video in the future about making this again.
@dennisfreitas7675 3 жыл бұрын
@@RCConstructionHobby how can I get the 3D parts or the wheel
@RCConstructionHobby 3 жыл бұрын
Search shapeways.com and type in bruder delta and all the parts you need are there to download for free. Or you can buy them and they print it.
@dennisfreitas7675 3 жыл бұрын
@@RCConstructionHobby thanks
@MCgangsta11 5 жыл бұрын
Do a video on how you converted your tractor.
@RCConstructionHobby 5 жыл бұрын
In the process of editing the video. I till be still shots but with voice over to explain what was done. should have it out this weekend hopefully. make sure you hit the notifiation button so you know the video is up.
@MCgangsta11 5 жыл бұрын
@@RCConstructionHobby Sounds good man, gave you a thumbs ups and subed! I am also converting a ERTL tractor. Ill post more of it soon.
@wahyurc1790 3 жыл бұрын
😱😱😱😱😱😱😍
@MeGuess_Adventures 2 жыл бұрын
Well you build me one? How much??
@RCConstructionHobby 2 жыл бұрын
Wish I had time to. I am making a new one and hopefully it will be an easy build compared to this one.
@MeGuess_Adventures 2 жыл бұрын
@@RCConstructionHobby That’s my main issue. I have no time and don’t want to spend $1600 lol
@RCConstructionHobby 2 жыл бұрын
I wouldn't spend $1600 on a skid steer. I want to make these for under $500. But look for a future video on building the new skid steer.
FMD RC Construction
Рет қаралды 4,8 М.
RC TRUCK ACTION
Рет қаралды 47 М.
RCSparks Studio
Рет қаралды 119 М.