How to Convert an Epson EcoTank Printer for Sublimation Ink

How to Convert an Epson EcoTank Printer for Sublimation Ink - ET 2400

Рет қаралды 37,333

Жыл бұрын

Doing crafting projects with sublimation elimanates the need for weeding. But the printers are expenisve. Let me show you how to take the cheapest Epson Ecotank Printer and convert it to use with sublimation ink.
Links
(Some links may be affiliate which means I get a small commission to help support my channel at no cost to you)
Epson EcoTank ET-2400
amzn.to/3ZipI4i
www.target.com/p/epson-ecotan...
www.walmart.com/ip/Epson-EcoT...
Sublimation and Infusible Ink Products
Epson EcoTank ET-2400 Printer
amzn.to/3ZipI4i
Hiipoo Sublimation Ink (highly rated)
amzn.to/3z59xg3
A-SUB Sublimation Paper 8.5x11 Inch (highly rated)
amzn.to/3FOU0Vq
Cricut HEAT RESISTANT TAPE .75" x 52'
amzn.to/3nqa0H2
Heat Tape Dispenser (highly rated and holds 1 in. and 3 in. rolls)
amzn.to/3nbnTc8
Cricut Mug Press
amzn.to/42E6t8o
Cricut Mug, 15 oz. 2 pack
amzn.to/40ivxAj
Cricut Mug, 12 oz. 2 pack
amzn.to/3nk0s0o
Cricut Stackable Mugs, 10 oz. 4 pack
amzn.to/3TGEPDH
Cricut EasyPress 2 9x9
amzn.to/3TIWhHC
Cricut EasyPress 2 12x10
amzn.to/3TIWhHC
Cricut EasyPress 3 9x9
amzn.to/3nnxgWa
Cricut EasyPress 3 12x10
amzn.to/3JK5r26
Cricut EasyPress Mat 8x10
amzn.to/3FTyaQG
Cricut EasyPress Mat 12x12
amzn.to/3z9Cjwm
Cricut EasyPress Mat 16x20
amzn.to/3K8cJ0J
Cricut Hat Press
amzn.to/3ZeDEMY
Cricut Autopress
amzn.to/3z50AU3
Mats
Cricut Brand Mats
Standard Grip
amzn.to/3nmKvqj
Light Grip
amzn.to/3lKPj8r
Strong Grip
amzn.to/42Hluq8
Fabric Grip
amzn.to/3z9KM2x
Joy Standard Grip
amzn.to/42HE556
Joy Light Grip
amzn.to/3TL7JT3
Nicapa Brand Mats - less expensive and I love working with them
Standard Grip
amzn.to/40n9BUM
Light Grip
amzn.to/3TH7atA
Strong Grip
amzn.to/3noNBu4
Fabric Grip (I haven’t tried these)
amzn.to/40xZJam
Joy Light Grip
amzn.to/3TL7JT3
Cricut Machines
Cricut Maker 3
amzn.to/3K7MM1q
Cricut Explore 3
amzn.to/40entQN
Cricut Joy
amzn.to/3z4uzeU
Cricut Maker
amzn.to/3LUrxl1
Cricut Explore Air 2
amzn.to/40xx456
Tools
Cricut Basic Tool Set
amzn.to/3TLYAJX
amzn.to/3TFMcvb
Cricut Essential Tool Set
amzn.to/40xydtt
Cricut Joy Starter Tool Set
amzn.to/3nk8VAN
Stab-n-Grab Tweezers (6 Different Colors Available)
www.143vinyl.com/stab-n-grab-...
Pin Pen (5 Different Colors Available)
www.143vinyl.com/pin-pen-weed...
X-acto Knife (6 Different Colors Available)
www.143vinyl.com/soft-grip-x-...
4" Squeegee (my favorite tool for burnishing vinyl) (6 Different Colors Available)
www.143vinyl.com/4-squeegee-b...
Little Red Scraper
www.143vinyl.com/little-red-s...
Tool Holder (6 Different Colors Available)
www.143vinyl.com/651-vinyl-to...
Medium Tack Clear Transfer Tape
www.143vinyl.com/Clear-Medium...
Cricut Brayer and Large Tweezers
amzn.to/3z7Jp4g
Cricut Scraper and Spatula
amzn.to/42EVWtC
Cricut TrueControl Knife Kit
amzn.to/3nivINk
Cricut Self-Healing Cutting Mat
amzn.to/42EVY4I
Cricut Sewing Kit
amzn.to/3TLYKRq
Cricut Ultimate Fine Point Pen Set
amzn.to/3lOCWbn
ORACAL 651 Glossy Vinyl - 24 Pack
amzn.to/3FRrMte
Heat Transfer Vinyl (highly rated)
amzn.to/3z82Z0d
Designs
Creative Fabrica
www.creativefabrica.com/ref/1...
Design Bundles
designbundles.net?ref=37HApV
Some links may be affiliate links. If you click on it and purchase products through my links, I receive a small commission at no extra cost to you. That's what helps so I can keep buying new Cricut-related products to help you learn how to make and get the most out of your machine!
Let's connect!
Join our Facebook Group! / 833963917083326
Like My Facebook Business Page: / hanks-maker-mentor-109...
For business inquiries, e-mail: ruth@hanksmakermentor.com
My favorite place to buy craft supplies is www.143vinyl.com
Their Facebook Group is
Cricut - Silhouette - Inkscape - Vinyl - HTV(143VINYL™ formerly 651VINYL®)
/ 651vinyl

Пікірлер: 155

@shanwoods Жыл бұрын

My daughter bought this printer for me for my birthday today. I’ve never done sublimation so I thank you for this video

@HanksMakerMentor Жыл бұрын

Happy Birthday! I'm happy to help. I'll have more sublimation videos coming out in the near future.

@marthawilliams152 Жыл бұрын

Thank you Sooo much for this video. I just received this printer for Christmas and can't wait to sublimate on it.

@HanksMakerMentor Жыл бұрын

I'm so excited for you Martha!!!

@michelemathews904 Жыл бұрын

Thank you so much. I was going to buy one of the printers they are 3,4,5, and hundred dollars and up. You have made my day.

@HanksMakerMentor Жыл бұрын

I'm so glad to hear that!!! I hope you enjoy it!

@marthawilliams152 Жыл бұрын

Thank You Soooooo much for the much needed video. I love the fact you got straight to the point but very detailed. You have really blessed me in my crafting experience ❤

@HanksMakerMentor Жыл бұрын

Thanks for your kind comment. It was a great way to start my day.

@diandazzle6954 4 ай бұрын

Can i print using 2400 from cricuit on ipod

@karenharris4366 Жыл бұрын

Your instructions were PERFECT!

@HanksMakerMentor Жыл бұрын

Thanks Karen! I'm so glad it was helpful!

@jacobchristianglover3655 Жыл бұрын

All done, followed your instructions, thanks for the tutorial!!!

@HanksMakerMentor Жыл бұрын

I hope you enjoy sublimation! Thanks for watching!

@foreverkq5343 3 ай бұрын

Great vid and helpful 💯

@laverngordon Жыл бұрын

I just bought mine off eBay this morning at a good steal of a deal and can't wait for it to reach me in JAMAICA 😍. Thank you so much for sharing

@HanksMakerMentor Жыл бұрын

Enjoy!

@laverngordon Жыл бұрын

@@HanksMakerMentor Thank you so excited for it to get here

@HanksMakerMentor Жыл бұрын

Are you going to use it for sublimation or inkjet?

@frankdearr2772 11 ай бұрын

Great topic, thanks for sharing :) 👍

@HanksMakerMentor 11 ай бұрын

Thanks for watching!

@edzoedzo369 11 ай бұрын

I guess it works with any eco tank printer! Thanks for your video 👍👍👍🥰🥰🥰

@HanksMakerMentor 11 ай бұрын

Thanks for watching!

@angelanjones9848 Жыл бұрын

So easy ❤ thanks

@HanksMakerMentor Жыл бұрын

Thanks for watching Angela! I hope you enjoy your printer!

@user-rz9vo3yb5y Жыл бұрын

Thank you .simply ,short on point and explained clearly ,some videos are just too long ,talking too much

@HanksMakerMentor Жыл бұрын

Thanks for watching! I'm glad it was helpful!

@taniasantiagobarriera7931 Жыл бұрын

That's awesome thank you so much. I have a question can sublimate mugs with my epson ecotank 2400 ?

@HanksMakerMentor Жыл бұрын

Yes! You can print designs to sublimate on mugs if you are using sublimation ink and sublimation paper. Depending on the size of the mug, you might have to do two prints and piece them together.

@elisandraalvarez9210 2 ай бұрын

Good afternoon. I would like to know what soft wear can I use I’m lost

@shortthang5559 Ай бұрын

Hello, I wanted to know if you can print larger than 8.5x11

@sonjadelucia1178 2 ай бұрын

Do you have to use that brand of ink? And do you have to use the same paper brand that you used of ink? Thank you

@dylleff Жыл бұрын

Only thing you’re missing is the StarCraft printer lol great video very informative.

@HanksMakerMentor Жыл бұрын

Thanks for watching! I know other companies make good products too but StarCraft is reasonably priced and always seems to work great.

@rosealaniz95 Жыл бұрын

Thank you for this information! I do have a question. Did you have any issues after a whilw due to installing the driver? Another crafter said she had problems after she did that

@HanksMakerMentor Жыл бұрын

Thanks for watching! I haven't had any issues that I've noticed.

@Gnakeita 6 ай бұрын

Great video! Very easy to follow! Thank you for sharing!!!

@HanksMakerMentor 5 ай бұрын

Glad you enjoyed it! Thanks for watching!

@Djmajesticenlacasa. Жыл бұрын

thanks 💞

@HanksMakerMentor Жыл бұрын

Thanks for watching! I appreciate it!

@Nic_cole Жыл бұрын

Did you take the small plastic piece that holding the colorful cords and the king plastic piece out? 4:41

@HanksMakerMentor Жыл бұрын

Hi Ashley, I'm not sure I understand your question. If you are asking what I took out of the ink bottles- I unscrewed the entire cap, removed the foil liner, then screwed the bottom part of the cap back on. Some of the caps had a seal that was covering just the top of the bottle. I removed those as well.

@RebelFnMomma Жыл бұрын

Do you have a more in depth video of the registration process mine failed, they do not reply by email and it is causing me grief! I just want to know if I can get started without registration Lol

@HanksMakerMentor Жыл бұрын

I will be doing a more in depth of the registration. Unfortunately, my kids and I are passing a bug that has messed with my voice. It should be done by the end of the week. I think you can proceed without registering as long as you have the correct software installed.

@SavedByGraced-wk3km 2 ай бұрын

Help, I forgot to press the button to charge the print heads and now I don't know what to do, it is only printing in faded black

@tylerstrope805 Жыл бұрын

Can you use a epson et 2400 for sublimation after its already been used for regular ink

@HanksMakerMentor Жыл бұрын

I think so. It will cost you both types of ink as you get the inkjet ink out of the tanks and clear it from the lines. I've been looking for a used printer to test it on but they are not in my budget right now.

@chartrucker Жыл бұрын

Did you need to install any additional icc files on your computer for color correction.

@HanksMakerMentor Жыл бұрын

My laptop didn't need an additonal ICC profile. My new desktop might. This video should help. kzfaq.info/get/bejne/fOCqqcx0qbaom6s.html

@naafiahussainy9407 6 ай бұрын

I just brought this printer. I need to know, can I load paper as much as I want. Can we print tumbler size paper in this printer?

@HanksMakerMentor 6 ай бұрын

I would suggest not loading it completely full of paper. I can print enough to cover a skinny 20 oz tumbler.

@quiwannaarrington7143 11 ай бұрын

I have this machine and everything that comes with ut and still dont know what is the biggest size it prints. Would you happen to know?

@HanksMakerMentor 11 ай бұрын

The max width is 8.5. Standard length max is 14 inches. You can set user defined papers up to 47.2 if you have a paper roll. Maximum Paper Size (User Defined) 2.2" x 3.4" to 8.5" x 47.2" (54 mm x 86 mm to 215.9 mm x 1,200 mm)

@cindybrown8472 Жыл бұрын

Did you connect to the internet and to your computer during setup?

@HanksMakerMentor Жыл бұрын

Yes Cindy! I connected it to my Wi-Fi and set up the drivers and utilities on my computer. I'll be doing another video breaking it down further.

@meghanlivesey809 Жыл бұрын

Is there a way to print things more vibrant? Does that make sense?

@HanksMakerMentor Жыл бұрын

Great question Meghan. The colors will be more vibrant after you press it.

@brialo6016 Жыл бұрын

Converted a new printer to sublimation it started leaking a few weeks after purchasing it I had to throw it away it was eco tank 2803, very disappointed New to your channel thanks for the video

@HanksMakerMentor Жыл бұрын

Oh no! Any ideas why it started leaking? Thanks for watching!

@portersplayhouse543 Жыл бұрын

I am printing on 32 oz Hogg Hydro flask cup and cant figure out what size to print to cover the entire cup.

@HanksMakerMentor Жыл бұрын

I looked but didn't see a template for it. I think you will need to measure, make your own, and test it before committing to projects.

@user-xq1nu8vf1q 7 ай бұрын

How do you mirror on a ET2400 using an iPhone 13

@HanksMakerMentor 6 ай бұрын

I don't have an iPhone so I'm not sure. Good Luck!

@jettmusicchannel555 Жыл бұрын

We've already filled the machine with the regular ink that comes with it to get it set up. Can we convert after using up all the regular ink or draining the regular ink out now and then converting it to sublimation ink?

@HanksMakerMentor Жыл бұрын

I'm looking into it. What type of printer is it?

@jeneenrobinson1299 Жыл бұрын

I have the same printer u have but I’m using the ink that came with it and what’s a good paper to use to make shirts

@HanksMakerMentor Жыл бұрын

I've used the StarCraft Printable Transfers and had good results. www.143vinyl.com/inkjet-printable-htv-transfers/

@user-ce5hg9bc9s Жыл бұрын

I have an Epson Ecotank 2720 that already has ink in it. Can I still convert it to sublimation?

@HanksMakerMentor Жыл бұрын

I think so but you will end up wasting ink. www.reddit.com/r/Sublimation/comments/l6gcet/sublimation_ink_in_a_print_that_had_regular_ink/

@daliciapenny524 Жыл бұрын

If you don’t mind. I would like a detailed printer setup.

@HanksMakerMentor Жыл бұрын

I would be happy to! Thanks for watching Dalicia!

@camrycherry3249 Жыл бұрын

Can you use an iPad to set it up and print your sub prints off of?

@HanksMakerMentor Жыл бұрын

You should be able to, The quick start guide offers the QR code for the app. Just keep in mind that you will need to set location to while using the app and print in the app or set location to always and you should be able to print from other apps.

@debbiemoller6481 9 ай бұрын

What if I filled with the regular ink? How do I remove it and add the sublimation ink?

@HanksMakerMentor 9 ай бұрын

I'm not sure if this will work but I think you can use a syringe to remove most of the old ink and then add the sublimation ink. You would need to print many purge pages to get rid of the last of the regular ink.

@ybt84 7 ай бұрын

Hi how is your submission printer?? Does it still work am so nervous to buy one and convert it

@HanksMakerMentor 6 ай бұрын

I'm still happily using my printer for sublimation. My biggest issues have come when the lines clogged because I didn't use it enough.

@latishalevi1710 5 ай бұрын

Can you hook up a camera to the printer to print pics?

@HanksMakerMentor 5 ай бұрын

I don't know. I haven't tried because I want to be able to adjust my printer settings from my computer.

@cromby8815 Жыл бұрын

Hi. I've done this, prints nicely but won't transfer to anything sublimation. I use hippo ink and paper. Any ideas?

@HanksMakerMentor Жыл бұрын

What heat source are you using?

@cromby8815 Жыл бұрын

@Hanks, Maker Mentor I had the cricut mug press as everyone swore it worked and did videos but not for me no luck. I tried to sublimate on a 100% polyester t-shirt using the heat press. I can use infusable ink that's about it right now.

@HanksMakerMentor Жыл бұрын

That is a harder problem to solve than I was expecting. I'm happy to try and help. Since you are having success with Infusible Ink, I looked at the Amazon listing for the hippo paper. These are the factors they suggest. >Print paper correctly (The white side is the print side and the Hiippo logo is printed on the backside) >Print mode >Transfer pressure >Transfer temperature >Transfer time If you have pictures or video, I'm happy to look to see if that clears up what the issue is.

@sallypaluh3598 Жыл бұрын

ok I have been using mine after setting it up and putting sublimation ink in it and now all i get it to print is yellow and i have cleaned the heads and it is full of ink. Help

@HanksMakerMentor Жыл бұрын

That is frustrating! This is a video from DIY Alex that I used when my printer had problems. kzfaq.info/get/bejne/iZ6YiaqQ3p_OqGQ.html It is where I suggest starting since I don't have a troubleshooting video yet.

@alienychris511 Жыл бұрын

what kind of pigment ink would work well with this printer?

@HanksMakerMentor Жыл бұрын

I'm not sure. The Epson website lists Epson 522 ink which is dye based. Epson does make pigment based ink but I don't know what it would do to the printer.

@monicacervantes5460 Жыл бұрын

I converted the same printer today and the colors are off do you k kw how to change the color settings?

@HanksMakerMentor Жыл бұрын

This video should help kzfaq.info/get/bejne/fOCqqcx0qbaom6s.html

@monicacervantes5460 Жыл бұрын

Thank you

@cristen1711 5 ай бұрын

@HanksMakerMentor hello I bought this printer and converted it to sublimation Inc. and my first few prints turned out fabulous and then now I am having vertical lines through my prints. I have watched many videos and tried many things to try to fix it. I hope you can help?

@agudecar 5 ай бұрын

Hi, I found this on line: Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, Vertical lines on inkjet printouts are usually the result of dirt or debris in the print engine interfering with the travel of the print head. I hope this help.

@HanksMakerMentor 5 ай бұрын

Hey! I think running a nozzle check is a great step. How long has it been between prints?

@mayfaune 9 ай бұрын

But can i use it for normal printing after that?

@HanksMakerMentor 9 ай бұрын

You can print on regular paper but the ink won't be as vibrant. It will probably be more expensive in the long run.

@alienychris511 Жыл бұрын

what setting should you use

@HanksMakerMentor Жыл бұрын

I use Matte presentation paper and highest print quality. You can check out this video kzfaq.info/get/bejne/fOCqqcx0qbaom6s.html

@janiekostyal9524 Жыл бұрын

How do you make the colors more vibrate?

@HanksMakerMentor Жыл бұрын

Great question Janie! You might want to change the ICC profile or change how long you press for.

@evarogers7140 11 ай бұрын

How do I change ICC profile

@mascardofamilychannel4001 Жыл бұрын

My network won’t work there’s a password administrator when I did setup need help please

@HanksMakerMentor Жыл бұрын

I'm happy to try and help. When is it asking for a password administrator?

@kathycochran9210 Жыл бұрын

Rather than using wi-fi will it work with the ethernet cable or usb?

@HanksMakerMentor Жыл бұрын

I think so. This Epson help article explains that you can set it up for both USB and wireless but you have to install the software twice. epson.com/faq/SPT_C11CJ67201~faq-0000b11-shared?faq_cat=faq-8796127635532 I don't see why you wouldn't be able to only install it as USB. You would start with it unconnected, download the software, run the setup program, then when you see the Select your Connection, you would plug in the printer using your own USB cord (because it is not provided).

@kathycochran9210 Жыл бұрын

@@HanksMakerMentor thank you so much for your assistance.

@HanksMakerMentor Жыл бұрын

I'm happy to help. I do my best to give correct information but I can't guarantee it will work.

@tashapendleton300 9 ай бұрын

Hi could you send me a video please how to set up

@HanksMakerMentor 9 ай бұрын

What are you trying to set up?

@aprilmiley2499 Жыл бұрын

I followed everything n mine doesn’t print it’s literally blank.. any suggestions please help

@HanksMakerMentor Жыл бұрын

Does it put a piece of paper through or not even try to print?

@sandyelliott7008 Жыл бұрын

How do I empty my ecotank from printer ink to sublimation ink?

@HanksMakerMentor Жыл бұрын

I've heard of people using a syringe to get most of the ink out but I don't know what impact that might have. You can print surge pages of the specific color(s) that you need to remove. Be sure not to print when the ink is too low or you will damage the printer. Once most of the ink is out, put sublimation ink in as well so you can continue to purge the inkjet ink. It will take awhile.

@SeanLumly 8 ай бұрын

Is sublimation an either-or proposition? Is it possible to have a printer print sublimation one day, and regular ink the next?

@HanksMakerMentor 7 ай бұрын

I think it is possible to change the ink but it would end up wasting a ton of ink. It is probably better to just get a cheap second printer

@SeanLumly 7 ай бұрын

@@HanksMakerMentor Thank you for the information! Yes, I figured as much

@chatalcharles5210 Жыл бұрын

Did you use the ink the printer came with or you bought sub ink separately?

@HanksMakerMentor Жыл бұрын

For sublimation, you need to buy sublimation specific ink separately. I used the StarCraft brand ink. I gave the ink that came with it to a friend who uses an Epson EcoTank printer as her inkjet printer.

@chatalcharles5210 Жыл бұрын

@@HanksMakerMentor thank you for responding you have gained a new subscriber outta me love your video i just came across your page do u have any videos teaching a newbie like me to print and sub?

@HanksMakerMentor Жыл бұрын

Thank you! I have a playlist of my sublimation videos. kzfaq.info/sun/PL-FgK9cqrx18FFGuM0KZweb06tfaHz07S I think this one will help you the most kzfaq.info/get/bejne/j6qdnNqGxLSYj4k.html Feel free to let me know what other questions you have

@donnastark3352 Жыл бұрын

i cant get past the firmware part it say it failed

@HanksMakerMentor Жыл бұрын

Hello Donna, Are you setting it up for WiFi or USB?

@melissamelia2011 Жыл бұрын

Hey, how do you take out the ink if u have put the wrong one in?

@HanksMakerMentor Жыл бұрын

Did you put in the inkjet ink or wrong sublimation color?

@melissamelia2011 Жыл бұрын

@@HanksMakerMentor put the regular ink in there and was supposed to put sublimation ink

@HanksMakerMentor Жыл бұрын

I would print purge files to use up all the ink in them that you can, then add the sublimation ink and run more purge files. If you print without enough ink in the lines it can damage the printer. You'll waste some sublimation ink but it is cheaper than a new printer.

@melissamelia2011 Жыл бұрын

@@HanksMakerMentor video would be helpful, it’s no videos for that type of tank. I was thankful to find you and ask you about it

@errickan38 Жыл бұрын

i have done everything you have done but mines won’t print the page ugh i’m getting so frustrated

@HanksMakerMentor Жыл бұрын

That is frustrating! Does it give you an error message?

@hestersnider2941 Жыл бұрын

How do I mirror print?

@HanksMakerMentor Жыл бұрын

I'll be making video about it soon but in the meantime. Open Printer settings, Printer Properties, more options, additional settings has Mirror image. You can also do it in many of the programs, flip horizontal does the same thing as mirror.

@leonorabedolla2796 Жыл бұрын

i just did everything in the video, but when i try to print out an image, there are white lines going thru the images, no matter what image i choose to print. please help.

@HanksMakerMentor Жыл бұрын

That must be disappointing. I would suggest running a nozzle check then possibly cleaning the print heads. Let me know if you have more questions.

@Yutoe Жыл бұрын

I'm also having this problem and I have ran "head cleaning" twice and still get the lines, my black seems to cut the top of letters off too. Any help would be appreciated Thanks in advanced

@HanksMakerMentor Жыл бұрын

I would suggest printing a page of straight black to try and clear the line.

@dolores8038 4 ай бұрын

I did everything as you instructed and the black ink has just been leaking

@HanksMakerMentor 4 ай бұрын

Where is it leaking from?

@wilsonganks Жыл бұрын

Hello, maybe I was impatient but I did not see how you convert it. All I saw was that you ordered sublimation ink and then insert it into the ink tank instead of using the original epson ink. Is that all that is required? No hardware modification whatsoever? Thank you in advance.

@HanksMakerMentor Жыл бұрын

No hardware modifications needed to convert to sublimation. It is a very easy process.

@wilsonganks Жыл бұрын

@@HanksMakerMentor So basically just switch the Inkjet ink with a sublimation ink? By the way, what are my risk? Printhead damage?

@HanksMakerMentor Жыл бұрын

Yes. You void the warranty as soon as you fill it with sublimation ink. Print lines clog if you don't print frequently. Crafters I trust have done this and had no issues even after a few years.

@rhall198669 Жыл бұрын

After doing the 1st print how come my computer is saying updating the firmware. It's saying unable to update the firmware of printer please try again I've tried it 3 times and it's not working did I miss something

@HanksMakerMentor Жыл бұрын

I didn't have that issue. I would suggest turning off the printer and restarting your computer before trying again.

@NOT_A_TOP_FAN Жыл бұрын

This would be my biggest issue with doing a conversion with Epson… Having had a regular inkjet Epson for a long time, they get very funny with inks and error codes…the one I have now has a constant error code when I use non Epson branded cartridges. It still works, but a constant error message displays which is annoying.

@HanksMakerMentor Жыл бұрын

@BC M - that makes sense. Do you have an ecotank for your inkjet? I don't know how the printer would be able to tell the different inks. I know some the ink cartridges have an electronic chip that identify it as the brand.

@NOT_A_TOP_FAN Жыл бұрын

@@HanksMakerMentor I don’t have one yet at all. The old inkjet I have doesn’t have the ability to add those it’s so old…I just use it for normal printing… For the last couple months been on the fence whether to go the eco solvent rout or sublimation. Most of my business is all vinyl, which is perfectly fine…but I feel like I can invest in another piece of equipment at this point. I realize there’s a huge price difference in going eco solvent vs sublimation (even at a high end) so I’m just not sure what direction yet or wait to see what new products are on the horizon. And after I said that about this printer, I didn’t even realize this one had tanks! So yeah, I don’t see how they could identify if those are simply refilled….

@HanksMakerMentor Жыл бұрын

@ BC M It is awesome that you are able to reinvest in your business. What types of vinyl products do you make? I've noticed an increase in the variety of sublimation blanks available. I'm going to look into eco solvent printing more.

@whatsup-AI Жыл бұрын

Hi- I noticed you just added the sublimation ink. Did the machine come with regular ink? My question is, are the ink cartridges empty that are already in the machine? OR Is there regular ink pre-loaded in the cartridges? Do we have have to purchase clean ink cartridges to put the sublimation ink in? Please let me know, thanks.

@HanksMakerMentor Жыл бұрын

Hi Lila! The printer does come with inkjet ink that we won't use with the same printer we are putting sublimation ink in. The Epson Eco-Tank printers have tanks that come empty when you buy it. You don't have to buy additional cartridges. If you are still unsure, let me know and I'll explain further.

@whatsup-AI Жыл бұрын

@@HanksMakerMentor Great, got it! Thank you for the response and clarifying! :)

@HanksMakerMentor Жыл бұрын

I'm happy to help!

@ArabianPrints Жыл бұрын

I have converted my Epson-2400 printer to sublimation, I am using the correct sublimation ink (by Hippo Brand), I am using A-Sub paper, I am using phone case blanks, but there is nothing printing on the blanks and I do not know what is wrong. Please if anyone knows why, please share your advice

@HanksMakerMentor Жыл бұрын

Many sublimation blanks have a protective coating over the surface that needs to be removed before you can apply the sublimation. Could that be the problem?