How to cut 12 mm thick glass

Рет қаралды 1,413,752

3 жыл бұрын

Hello friends, in this video I will show the very simple technique of cutting thick 12mm glass using toyo cutter. By this method any one can easily cut thick /thin glasses and mirrors at home.which can be used to create various craft items and aquariums also.in many videos on youtube are using sparkplugs, files,scissors etc for glass cutting purpose but they are not appropriate tools for glass cutting which might result in breakage of glass of even an injury to your body.so please watch my video and follow the instruction and by some practice any one can master the art of cutting glass. I have also demonstrated the method of drilling hole in 12mm glass which you can see by going through link below.
Thankyou.
How to drill hole in 12mm glass
• how to drill hole in g...

Пікірлер: 308

@donmarcel9167 2 жыл бұрын

I spend 39 yrs in glass industry in Dubai ....we had glass cutter from mp India, Mr nooral he was uneducated, but never seen glass cutter like him, who can beat intermac waterjet machine whc can cut any shape or thikness, he use to say bhai sahab Mai glass kattata nahi khata hu,. Means i don't cut glass i eat glass, seen him cutting any thickness....any shape like child plays with scissors cut paper.....great born talent

@jugaadtechnology449 2 жыл бұрын

Hats off to Mr Nooral...

@holvireak-77788 2 жыл бұрын

Hello, I am also a glass cutter, you can all access my mail in my Channel.

@alfredosantiaguel5784 2 жыл бұрын

That's not the good way to cut thick glass.Im a glass cutter for 36 yrs .

@headlinesgenerator5426 2 жыл бұрын

Uneducated? Really!

@think_green 2 жыл бұрын

@@alfredosantiaguel5784 please teach me. I want to learn thick glass cutting Sir. Thanks in advance. 💐😇

@violentabyss Жыл бұрын

I have no idea how I got here but this was so cool to watch, clearly a craftsman at work

@Akindone53 Жыл бұрын

One of the things novices do when cutting glass is using too much pressure with the cutting tool. You know when you have done it right by the sound. It should be a light hiss and the score is a fine line , almost hard to see. Too much pressure and the sound is crunchy with score looking like a deep scratch. The deep scratch are tiny fractures running radially from the line and at best will result in a rough cut and at the worst not cutting at all or running everywhere but where you wanted the cut. Also make sure you have cleaned the glass first and the cutter is not nicked and/or dirty. My humble experience.

@ladyfame1430 Ай бұрын

Thank you for the information.

@PercussusResurgo 2 жыл бұрын

Thanks. Sounds like Planning and Patience are key.

@agustincooks1079 9 ай бұрын

Thank you, I was able to cut to size a thick mirror following your technique using the hammer. A bit unerbing but it worked!! Great simple way of cutting very thick glass with simple tools, down to earth. I really like that, just using your hands, even wearing sandals 😊 Some people get over killed with so much gear and tools. From all the videos I watched, this was the most helpful. Thsnk you

@SheltiesRule49 Жыл бұрын

Thank you for the demo!!

@Josh-ww7mp Жыл бұрын

I always say. " you can't control glass but you can tame it." I love my occupation and it seems as if you do too.

@edled1026 6 күн бұрын

Excelente video

@jeffhester1443 2 жыл бұрын

Jeez weez, I would not even attempt it. Thank you for your expertise, and for sharing it with us.

@stephengonzales3276 2 жыл бұрын

Brilliant. Thank you so much for sharing.

@mtaur100 Жыл бұрын

jugaad technology: Thank you for this video. I see now that it is important to develop a "feel" for how hard to tap. This technique allows people to cut glass with simple tools and a little patience and perseverance. Thanks again for sharing your high level ninja glass cutting knowledge. 😊

@stargar 6 ай бұрын

thanks much for your experience leaning something here for you sir_ as a glass man

@garystone6583 Жыл бұрын

Been cutting glass for 42 years now and thicknesses up to 19mm by hand and only time I used a tapper was to start the scores of 10 and 12mm circles. Never on straight lines.

@OuyaYouyo 6 ай бұрын

Que usabas entonces en línea recta?

@DouArtShi 2 жыл бұрын

Thank you for sharing your technique. 🙏🏾

@banchawongphichaet1844 2 жыл бұрын

1. use more big table to cut 2.after the first hit by hammer you use that pen under the cuting line 3.push down the glass ......then the cuting line more smooth than this

@holvireak-77788 2 жыл бұрын

Hello, I am also a glass cutter, you can all access my mail in my Channel.

@holvireak-77788 2 жыл бұрын

Hello, I am also a glass cutter, you can all access my mail in my Channel.

@farhajkhan1000 2 жыл бұрын

Wow that awesome I'm amazed nice n cool jugaad thx for sharing. 😍🌷

@givaldosilva4381 2 жыл бұрын

Que marca e modelo de cortador vc usa nesse vídeo ?

@randallbaker4293 Жыл бұрын

I like your cool hand-made hammer!

@bandilla7317 Жыл бұрын

awesome idea it so effective.

@tlahuican 2 жыл бұрын

Thanks for the tip

@holvireak-77788 2 жыл бұрын

Hello, I am also a glass cutter, you can all access my mail in my Channel.

@africanxbru6412 Жыл бұрын

Well done!

@davidwilkinson9360 Жыл бұрын

I need to do this to a 10mm table top. How do I smooth the edge and make it look neat once the glass is cut ?? Thanks great video 👍🏻

@jugaadtechnology449 Жыл бұрын

By using belt sanding machine u can make the edges smooth.

@keshabchatterjee8708 2 жыл бұрын

Wonderful. Like 👍.

@emmamoffat867 Жыл бұрын

What an incredible skill

@curiouskitten 8 ай бұрын

Does your technique work for cutting tempered glass? Thank you for sharing your experience.

@DerDanachDenkende 4 ай бұрын

No, tempered glass cannot be cut without annealing it again.

@charlesmurphree Жыл бұрын

I have a project I'm doing to replace my patio glass. I was curious what should I do to make a center circle cut for my umbrella?

@fernandosilva7594 Жыл бұрын

Amazing!!

@thomasgoodman6075 Жыл бұрын

Your are a great crack, thanks so much.

@naveedkhan68 2 жыл бұрын

I was trying to same glass in small pieces but failed. I will trying your technique. Thanks for sharing

@jackiego1 3 ай бұрын

Thanks so much! Can I use any other type of oil before the cut?

@tuuljargal2629 Жыл бұрын

Техникээ хуваалцсанд баярлалаа.

@ricktaylor834 5 ай бұрын

holy crap cutting glass in sandals friggin crazy

@wiseinvestor566 6 ай бұрын

Just Use a brush to apply the oil on the glass before you cut it with the glass cutter and then place the sodden back part of the brush under the glass on the end of the cut and snap it pushing down.

@MedAluminumwork Жыл бұрын

Beautiful

@narcisobramosjr3336 2 жыл бұрын

Giive him a applause......

@elizabethmarrero5887 10 ай бұрын

Puedes usar un pincel o un vaso he introducir el toyo. asi se lubrica mejor.

@dharmikitchenprofileandgla1522 2 жыл бұрын

Good work

@pintobengkel8112 Жыл бұрын

Hadir nyimak boss ku suksesselalu 👍👍👍

@Wayeeh 17 күн бұрын

I tried this method several times on a Shower Glass 3/8” but the Glass won’t break !!! Any advice ( I have 72” L that I have to cut it to 48” ). Thank you in advance!!!

@philpesce6141 Жыл бұрын

Thank you

@saitony1912 3 жыл бұрын

Excellent 👍

@jugaadtechnology449 3 жыл бұрын

Thank you

@harshgaming7097 2 жыл бұрын

kzfaq.info/get/bejne/epaVo710mNjclp8.html see my video of glass cutting

@mohankrishnasamy1456 2 жыл бұрын

Learned something today 🙏

@holvireak-77788 2 жыл бұрын

Hello, I am also a glass cutter, you can all access my mail in my Channel.

@happycamperhotsauce216 11 ай бұрын

Will teak oil work for cutting fluid?

@jazzymack933 9 күн бұрын

Thankyou sir

@rosherrera3391 Жыл бұрын

Gracias

@husseinabdulkareem4657 Жыл бұрын

thanks alot...

@terryharris2092 7 ай бұрын

could you cut both sides ?? would that be better ?

@jugaadtechnology449 7 ай бұрын

Cut at one side is better

@bigredc222 2 жыл бұрын

That's amazing, I just scored a 1/4" piece of glass that won't break, I tried tapping it with the ball on the end of the cutter, I guess I need something heavier to tap it with?

@deshrajchoudhary5396 Жыл бұрын

Nice ❤

@jigneshtailor3651 2 жыл бұрын

That would be risky when tapping a large piece which would fall because of its weight. A support would be needed on both sides of the glass, and a ball pen hammer would have been better because of the round head as it would give softer taps, thinner glass can just be snapped after one tap to run the line, Thank You

@christianscustoms6429 2 жыл бұрын

Why watch a video if you already know everything?

@chocomoco1627 Жыл бұрын

@@christianscustoms6429 That's what we call a dumb question ! Jignesh Tailor's advises are important . You just earned a dislike .

@waterboy8999 Жыл бұрын

Turn it over.

@northeastcorals Жыл бұрын

IF it was a large piece, but it wasn't. The fact that the guy's made his own hammer from re-bar says to me maybe he doesn't simply have access to a plethora of tools so he makes do (& well) with what he has.

@kohinurakter5916 2 жыл бұрын

Nice

@ibrahimmanikfan79 9 ай бұрын

many technic learned from this glass cuttng shows

@Zhaqi.Creative_New Жыл бұрын

Mantap bos

@RajeevSharma-oz2sv 2 жыл бұрын

glass per miti lagaker cut kite hai yards kuchen aur?

@user-vx3ms1rn6p 2 жыл бұрын

Awesome

@CreateVideo 7 ай бұрын

*_Keren Sekali_*

@popezk3068 Жыл бұрын

Hi. Can I use sandpaper to smooth the edges?

@jugaadtechnology449 Жыл бұрын

It is better to use emery stone when u try to smooth edges manually.

@Keralam2024 2 жыл бұрын

How can I buy a cutting blaide, and average price.

@sajidrafique375 8 ай бұрын

If you scratch both sides of the glass with cutter it will become very easy

@ok.hoozi99 Жыл бұрын

عمليه معقدة قديمه . فيه ادوات اكثر فاعليه واقل تعب

@vijiyaravishankarvijiyakum1647 2 жыл бұрын

next, teach me how to make hole on the glass. thanks 😊

@jugaadtechnology449 2 жыл бұрын

Please check my other video for drilling hole in glass...

@dhanichannel9047 2 жыл бұрын

keran bos ku 🙏🙏 salam kenal bos

@Ankit_bro_official 2 жыл бұрын

Sir apne kach per line khichte samay kon si liquid dala h batao

@jugaadtechnology449 2 жыл бұрын

Kerosene oil

@Allinone-yl6mw 2 жыл бұрын

Mashallah

@kotteeswaranmassmageshwar7625 Жыл бұрын

Fine sir

@sunilroshnpuriya4886 Жыл бұрын

Hallo etnha time kathna ma lagha ga to farha to banha gya karegarh

@winstonclarke9221 Жыл бұрын

That"s a nice clean cut, excellent.

@HUNZAMOVIES 2 жыл бұрын

Very good👍

@DuckOfficialTv 2 жыл бұрын

👍👍👍

@elizabethmarrero5887 10 ай бұрын

pueden ponerlo en el piso y colocar un clavo en la linea de corte y hacer presión en ambos lados con los pies.. y zuazzzzz

@tholuong5224 2 жыл бұрын

May I ask you: If the glass was thinner ( about 2; 3; 4 mm...) , before it broke , we need to knock its face under the glass like you or do we bend it straight down? Thanks for your sharing on how to cut thick glass very good.

@erikmskima7545 2 жыл бұрын

Knock the glass only if you absolutely have to... His technique is not that great... Knocking the glass can make the edge very uneven... Your welcome..

@nalinchawda 2 жыл бұрын

This is also a method of cutting thick glasses ....nothing wrong in it . All methods are almost same only diffrence is how you apply force after scratching the glass .👍👌

@ALAOUIsamir Жыл бұрын

Pa comme ça

@user-hs4mb4cl6h Жыл бұрын

No tiene ni idea como se corta un vidrio ese es un aprendis

@deviramu59 2 жыл бұрын

Semmaaa

@holvireak-77788 2 жыл бұрын

Hello, I am also a glass cutter, you can all access my mail in my Channel.

@rickymarino1208 2 жыл бұрын

I never knew this

@AbheshekGaming 2 жыл бұрын

19 mm ka glass kaatne mein itna time nahin lagta hai

@jeancuppens5182 2 жыл бұрын

De hamer is te breed, gebruik een puntige hamer

@bennygunawan5718 2 жыл бұрын

lama.....belajar lagi,,,,

@rajeshharsora5806 2 жыл бұрын

Aap ye bhi likhe ki sirf glass wale expert hi ka te warna hath me lag sakta he bhai

@aurinosilva473 Жыл бұрын

Aurino

@RolandoJacinto-xr8md Жыл бұрын

For me safety first use glove, I'm not use ruler straight to the point is using meter. and glass cuter Only,,, it's very fast,,

@Islamicshort22379 Жыл бұрын

Bhai itte der me customer chale gaye ho gye hm 😂😂😂😇

@prashanthsd4293 2 жыл бұрын

What if a glass break?

@AvishkaGamage-dx9vv 10 ай бұрын

What is the glue (gum) are you use ,reply me

@jugaadtechnology449 10 ай бұрын

Its not glue it is kerosene oil, as I mentioned

@AvishkaGamage-dx9vv 10 ай бұрын

@@jugaadtechnology449 thanks ,koheda tiyenne

@MeLlikes Жыл бұрын

Where to order?

@ernelvillamil9608 2 жыл бұрын

Come here in tubod glass... We will show you how to cut 12mm thickness of glass.. That is so basic...

@bharatbabu7492 Жыл бұрын

👍

@rajasthanidancevideo1168 2 жыл бұрын

Etni Der m to kitne glass cut kerdiye hote am experts in glass work

@harshgaming7097 2 жыл бұрын

kzfaq.info/get/bejne/epaVo710mNjclp8.html see my video of glass cutting video

@btech1708 2 жыл бұрын

Wow

@neatfreak1000 Жыл бұрын

I thought the end would be all smooth, but was wavy. Not what I'm looking for. Also, do you think it's wise to be wearing sandals when cutting glass?

@mohammadraza7203 2 жыл бұрын

jab glass cutting kar na nhi ata to kyu kar raha hai

@BlackFaceTrudeau 2 жыл бұрын

Does that work with tempered glass?

@jugaadtechnology449 2 жыл бұрын

No, this trick will not work

@shiyamaifrad8933 2 жыл бұрын

U cant cut tempered at home dude

@BlackFaceTrudeau 2 жыл бұрын

@@shiyamaifrad8933 I found out the hard way.. lol But can professionals/companies do it or is it just impossible to cut?

@shiyamaifrad8933 2 жыл бұрын

@@BlackFaceTrudeau it is not impossible cause u can get custom sizes from companies i guess they cut it with some heavy duty machines

@stewartmcmanus3991 2 жыл бұрын

Tempered glass CANNOT be cut. Glass companies cut holes, dog doors, handles etc BEFORE tempering. Do not attempt it as it will explode.

@pasuruanbaujengbonsai6306 2 жыл бұрын

Hadir

@umeshsahu1670 Жыл бұрын

Kab sikha kam aur kahan se bilkul ajnabi Ho Bosss

@luhithadarana1998 2 жыл бұрын

Are you using a normal kerosene?? Any other fluids are use?

@jugaadtechnology449 2 жыл бұрын

Yes

@brenttamatea7578 2 жыл бұрын

I use mineral turpentine for cutting oil for years it works fine as well and cheaper than kerosene have been recycling glass for years much cheaper when doing your own repairs.