How to Cut and Engrave Acrylic with a Laser

How to Cut and Engrave Acrylic with a Laser - xTool D1 10watt

Рет қаралды 205,911

2 жыл бұрын

How to Cut and Engrave Acrylic with a Laser. You guys keep asking, so here you go! Cutting acrylic with a laser. Engraving acrylic with a laser. Giving me a headache in the shop from fumes from the laser!
xTool Material Reference Guild:
cdn.discordapp.com/attachment...
St. Patty’s Day Sale:
store.xtool.com/?ref=RyzFeVwU...
Celtic Knot File:
designbundles.net/fable-and-g...
PREMIUM MERCH:
www.builddadbuild.com/store
Check out the NEW WEBSITE: www.builddadbuild.com/
DISCORD: / discord
PATREON: / builddadbuild
DISCLAIMER:
Working with Fire, lasers, Electricity and Power Tools is extremely dangerous. Please use caution if you are attempting anything in these videos.
Also, please drink responsibly.
_____________________________________________________
USED IN THIS VIDEO (affiliate links):
xTool:
store.xtool.com/?ref=RyzFeVwU...
Use Promo Code: BDBXTOOL for 8% off
Acrylic:
store.xtool.com/?ref=RyzFeVwU...
Magnets:
amzn.to/3hMo9Zn
StarBond:
www.starbond.com/?rfsn=286283...
Use Code BDB15 at checkout to save 15% OFF your purchase
Link to all my tools:
www.builddadbuild.com/toolshome
_____________________________________________________
Don’t forget to Like, Comment & Subscribe:
/ builddadbuild
_____________________________________________________
ADD ME ON:
Subscribe: / builddadbuild
Patreon - / builddadbuild
Discord: / discord
Instagram: / builddadbuild
Facebook: builditburnit
Twitter: / builddadbuild
Pinterest: / builddadbuild
TikTok: / builddadbuild
_____________________________________________________
MUSIC:
Falling with the Rain
#builddadbuild

Пікірлер: 363

@jarodmorris611 Жыл бұрын

Dude. That "What's in the box?" reference was so old school. Loved it.

@eimead 8 күн бұрын

Just wanted to say thanks for the channel... Seems like every time I'm trying to figure something new out you've got a fun and informative trial and error video to answer lots of my questions. Dipping my toes into the smelly world of acrylic now so this vid has been massively helpful

@BuildDadBuild 8 күн бұрын

Awesome. If you ever have any questions email me nick@builddadbuild.com

@s.t.s91 Жыл бұрын

Nick those look awesome! I can't wait to get my xtool. Please keep providing great content. More "How-To" videos with the xtool please!!!

@BuildDadBuild Жыл бұрын

You got it!

@geektoolkit 2 жыл бұрын

Another awesome video, entertaining and educational as always! I'm really digging how well those acrylic cuts went and the logo (also that shirts hilarious). Thanks for the great content!

@BuildDadBuild 2 жыл бұрын

Thanks, brother! Cheers

@KarlXByrne Жыл бұрын

The video should be titled "How to make a balls of it, but with extra steps"! I enjoyed the Warts'n'all approach, mistakes provide powerful lessons. The Logo disk at the end looks brilliant.

@BuildDadBuild Жыл бұрын

Glad you enjoyed it! Cheers

@TheDarkhorizons80 10 ай бұрын

Love the acrylic cut, especially the red engrave. I recently brought the creality 10w laser cutter and failed very badly with my acrylic project. Seeing this has given me hope to try again, I'll be trying to mirror some otlf those settings! Sadly creality have the worst customer service and after care so that linked cut info is very valuable

@jessd3012 Жыл бұрын

Wrapped in plastic! I love the humor in your videos, man! You always put a smile on my face. Like, "Yeah, I'd have a beer with this dude."

@BuildDadBuild Жыл бұрын

I'd have a beer with you too! Cheers

@DrewsTrains 2 жыл бұрын

I am about to purchase the D1 (thanks to your awesome vids!) I really appreciate your great videos on the D1!

@BuildDadBuild 2 жыл бұрын

Thank you. Cheers

@marcoss6212 2 жыл бұрын

Thank you for another informative video, appreciated. On an unrelated topic, I have watched two of your videos on tumblers, in one of them you mentioned the use of Dry Molly to be wiped off with lacquer thinner, then I used alcohol and it works, to later find out that water works just fine and perhaps a little better. I drenched a magic eraser with water and rubbed a little hard few times and then voilà, it comes out right off without much of dirt, almost like a film leaving very little dirt as it does lacquer to rinse behind. Have learn from you so this is just a little contribution from my part, I hope. Thanks again.

@BuildDadBuild 2 жыл бұрын

Hey Marco! Thanks for the tip! I'll give it a try. Cheers

@ricardorosario6320 Жыл бұрын

Awesome video . Got an xtool a while ago but was very inexperienced with it and I’ve learned so much here. Not sure if it’s the brand of acrylic that I’m using but I had to 100% on the engraving . Not sure why but 30% was rlly faded for me.

@shawnburton9441 2 жыл бұрын

Ok its official, you made me buy a new shop toy! Thank you! Hopefully its pretty easy for a guy to pick up as a virgin laser user. Can't wait to see what we can do with this thing. I appreciate your videos brother and look forward to learning a lot from here and other places of the same topic.

@BuildDadBuild 2 жыл бұрын

Awesome! You'll dig it. The learning curve is not very steel at all. Cheers

@All6sand7s 2 жыл бұрын

Cool video Nick! I'll have to try the acrylic! I've been making mirrors lately!

@BuildDadBuild 2 жыл бұрын

That's on the list! LOL Cheers

@berrybabe2438 2 жыл бұрын

You are so fun and awesomely helpful! I wish you were my uncle and I could come craft with you!

@BuildDadBuild 2 жыл бұрын

LOL I'm much crankier in person..🤣 Cheers

@Fleshybitz Жыл бұрын

Love your humour and your builds and your shirt.

@ufoquilter86 Ай бұрын

I find you fascinating so I will binge watch the hell out of your channel!! 😂 thanks

@BuildDadBuild Ай бұрын

Awesome! Thank you!

@MegaDwsmith 2 жыл бұрын

Awesome!! I just got a bunch of acrylic to to try perfect timing for this vid!!

@BuildDadBuild 2 жыл бұрын

Sweet!!

@leannewheeler4192 Жыл бұрын

“Just kidding don’t touch me” I LOVE IT!

@BuildDadBuild Жыл бұрын

Exactly!

@stuartwalsh4974 2 жыл бұрын

Great video, Nick, as ever, I learnt a lot. Love the red sparkly acrylic, I will be ordering some of that!

@BuildDadBuild 2 жыл бұрын

That stuff looks good! Cheers

@TheBks573 2 жыл бұрын

Just found the channel and I love the upbeat energy.

@BuildDadBuild 2 жыл бұрын

Welcome to the Party, Brad! Cheers

@giraffkrzy Жыл бұрын

I'm REALLY thinking about getting a laser cutting machine and have been watching videos to learn and I really enjoyed yours. You're very entertaining and fun. This XTool brand seems to be pretty popular and I've read some good reviews on sites that did comparisons.

@BuildDadBuild Жыл бұрын

There's a great user base and Facebook group too!

@ultraball69 10 ай бұрын

Hey, love your videos, so much to learn. Can you post a new link for the magnets you purchased. The one in the description is not working anymore.

@Jimc4007 2 жыл бұрын

Like the acrylic very much. You could cut a great router template using that. Might need to cut 2 or 3 and glue them together for thickness but with the laser that wouldn't be a problem.

@BuildDadBuild 2 жыл бұрын

Yeah, I've actually seen people do that. Cheers

@jocool1034 2 жыл бұрын

Man got my xtool ordered today brother I’m very excited.

@BuildDadBuild 2 жыл бұрын

Awesome! You'll dig it the most! Cheers

@ctoninelli 2 жыл бұрын

Just ordered one! Of course I didn’t see the promo code and link until now unfortunately. Can’t wait to get it! I preordered the 20w too.

@BuildDadBuild 2 жыл бұрын

Noice!

@kimc4768 2 жыл бұрын

I have the D1 and just begun. I have a clear piece of acrylic that I want to etch. But the laser somehow burns through, bounces off and actually etches the front and back of material and also shows a bit of a burn. What setting do you recommend? What black base are you using?

@BuildDadBuild 2 жыл бұрын

Your laser can't "see" clear acrylic. There are some tricks like tempura paint...but I'm still experimenting with them! Cheers

@keepamerica2astrong280 2 жыл бұрын

Dude great vid. Love the acrylic ! You look like a mad scientist with those goggles on, love it !

@BuildDadBuild 2 жыл бұрын

Now that makes me think I should buy a lab coat! LOL Cheers

@goatroper45 2 жыл бұрын

love your videos, thanks for helping us understand the capabilities. wondering if you can recommend proper eye protection for the Xtool D1? Thanks!

@BuildDadBuild 2 жыл бұрын

Hey there! These are the ones I use: amzn.to/3LjMF0w Cheers

@frankstoverpurebloodsaltya6441 2 жыл бұрын

Very cool nick!!!

@BuildDadBuild 2 жыл бұрын

Thanks brother!

@GETTR2024 2 жыл бұрын

Ordered!! Thanks for the 8% discount!

@BuildDadBuild 2 жыл бұрын

Sure thing!

@lajeannababauta2708 2 жыл бұрын

Hi, Nick. I’m having trouble cutting a straight line (y axis) and a perfect circle. Do you have a video on calibrating belts? The closest I’ve gotten to a perfect circle is if one belt is really loose, and the other, really tight.

@BuildDadBuild 2 жыл бұрын

I do not. But xTool does! kzfaq.info/get/bejne/l8WkjZtqrpm1poU.html Cheers

@toreemcgee 2 жыл бұрын

Do you think you could do clean acrylic work (earrings, etc) using the 5w D1 instead of the 10w?

@BuildDadBuild 2 жыл бұрын

Do you mean clear or clean? A diode laser cannot cut clear acrylic. If you are talking about "clean" engravings and cuts on darker acrylic I would have you reference this for power and speed: cdn.discordapp.com/attachments/664971419506966538/943584320055025744/Material_settings_file_for_xtool_material.pdf Cheers!

@craftsmadepersonal1096 2 жыл бұрын

Hello have you tried cutting mirrored acrylic on your xtool d1 10w? I cant seem to get it to cut all the way through even with a test cut file. It seems to melt back together before it cuts all the way through. Do you think the 20w would work, Any advice?

@BuildDadBuild 2 жыл бұрын

Hey! Email me at nick@builddadbuild.com and I'll let you know my findings. The next couple of days look kind of hectic, but hopefully I can get some tests run!

@GoCreateSomething 3 ай бұрын

It is good to see that your exercise equipment is getting used! rofl. It would be really cool to do a layered acrylic piece with LEDs between the layers so you can see each layer clearly. It might improve the piece and the depth effect to have spacers between the layers too. Maybe 3 mm between each layer might make the whole thing cooler. Guess I need to get with it and try some acrylic stuff!

@cpekurqe 8 ай бұрын

Try using damp paper towels under the acrylic, it works! You’ll get a very clean cut🤙🏻

@janetlee247 2 жыл бұрын

Thanks for your video. I had a question about engraving, is there anything/material that would be bright white? I see how well your lazer engraved the green material, and it turned out white. But is there a material that would look bright white? Thanks so much

@BuildDadBuild 2 жыл бұрын

I don't know of anything that will go brighter white than that except Enduramark's engraveable plastics. enduramark.com/collections/engravable-plastics If you want to check them out use promo code: rotary15 for 15% off your purchase. Cheers

@jmiller17wirrcom Жыл бұрын

Any recommendations on if something like this would work on a acrylic/plastic tumbler? Or what might work on them? Thanks and love the videos.

@BuildDadBuild Жыл бұрын

I'm honestly not sure. I'd have to run tests. Cheers

@cloesanders4567 2 жыл бұрын

Hello where did you get the measurements board that you place the product on to engrave/ cut under the xTool D1 ?

@BuildDadBuild 2 жыл бұрын

From @busterbeagle3d kzfaq.info/get/bejne/aOCffsp5ldWdeqc.html Cheers

@AndyChristianLoyola 2 жыл бұрын

if you want to cut, you can try to focus the laser on the surface of honeycomb than on the top of the acrylic. Works well for me - I'm using ortur laser master 2. 100 speed 70% power 2 passes

@felixsilva7863 2 жыл бұрын

I'm considering getting into this type of craft. I don't know anything about it yet but I'm curious as to how you find images and programs to do some of the projects like one and also for example images to put on wood.

@BuildDadBuild 2 жыл бұрын

Google is your friend! LOL If you're making something for yourself then google away. If you're planning on selling your work make sure you look for images that are not copyright protected. As far as programs, Laserbox Basic is free with the machine. I use Adobe Illustrator for design work, but Inkscape is a great FREE alternative. Cheers!

@felixsilva7863 2 жыл бұрын

@@BuildDadBuild thanks for the info!

@MervHernandez 2 жыл бұрын

Good morning. Are you using Laserbox or Light Burn? If using Laserbox, what setting are you using as far as where Material is chosen? Mine doesn't have one for acrylic. Thanks in advance 🤙🏽

@BuildDadBuild 2 жыл бұрын

HEy Merv! Check this out for suggested settings: cdn.discordapp.com/attachments/664971419506966538/943584320055025744/Material_settings_file_for_xtool_material.pdf Cheers

@mr_geometrikz 4 ай бұрын

Thank you very much for your video.

@harleytakuachemode 2 жыл бұрын

Love this stuff.

@BuildDadBuild 2 жыл бұрын

Thanks, brother! Cheers

@danightcreeper132 4 ай бұрын

That movie is great

@drgnfly1997 Жыл бұрын

What setting do you use for 2 and 3 mm acrylic. I used the recommended settings and it did not come out well at all. Thank you. Enjoying your videos

@BuildDadBuild Жыл бұрын

cdn.discordapp.com/attachments/664971419506966538/943584320055025744/Material_settings_file_for_xtool_material.pdf

@dastrick01 Жыл бұрын

Great video!!! Was curious if it’s possible to etch cured epoxy resin, like SuperClear. Thanks.

@BuildDadBuild Жыл бұрын

No. Epoxy is on the DO NOT LAZER list...

@hasher22 2 жыл бұрын

Sorry, I may missed it on the video, but how thick are your black and neon green acrylic? Edit: Found it, you said 3mm. Thanks! :)

@josephinewatkings Жыл бұрын

Thanks for your videos...I just got my x1...I am in the garage no windows, but I let the door up. I am in the south so it's hot...my cuts keep melting badly bubbling...what am I doing wrong?

@BuildDadBuild Жыл бұрын

You've got to dial in your settings. You're either going to slow or using too much power, or both. Cheers

@enetir999 Жыл бұрын

ya really having some fun

@jimbruce4348 2 жыл бұрын

Cool video as usual. I'm nearly convinced that I want one of these xtool lasers... One of my use cases is cutting clear acrylic. Is this something you have tried and does/did it work?

@BuildDadBuild 2 жыл бұрын

You can't cut clear acrylic with a diode laser. You'd be looking at a CO2 laser. Something like my Muse Core. kzfaq.info/get/bejne/pJOelsh9kqewaJ8.html Cheers

@Bungys1988 2 жыл бұрын

Question, had any luck with transparent acrylic, I can't seem to get it to cut at all.

@BuildDadBuild 2 жыл бұрын

I have been experimenting and just started to have a couple of breakthroughs. Stay tuned! Cheers

@hodderfan 2 жыл бұрын

Another great vid , what is the overall working area of the laser and would you recommend to purchase this machine ?

@BuildDadBuild 2 жыл бұрын

17" X 16" I would 100 percent recommend this machine. Let's put it this way. I have 5 lasers and that one, by far, gets the most use! Cheers

@melissaacosta9889 2 жыл бұрын

Hey love your videos. I just got my Xtool and without your vids it would still be in the box. can you send a link for the material report list. I cant find it. Thanks in advance

@BuildDadBuild 2 жыл бұрын

Try this: cdn.discordapp.com/attachments/664971419506966538/943584320055025744/Material_settings_file_for_xtool_material.pdf Cheers

@patsloansloan3459 2 жыл бұрын

Hey I was just wondering can you and grave stainless steel tumblers with that that have been powder coated? Great videos by the way

@BuildDadBuild 2 жыл бұрын

You sure can. Check out this video. kzfaq.info/get/bejne/fq2ojJph3NGYp6s.html Cheers

@AdamzStudio777 9 ай бұрын

Have you ever been asked to do clear acrylic engraving? I have a customer that just asked me today if I could do a heart fingerprint, laser, engraving on clear acrylic I’ve never done laser engraving on acrylic at all yet any tips inside from the video?

@ChinJazz Жыл бұрын

Great Video! I'm wondering if you know if it's it's possible to cut about 6mm think with the xTool D1 10watt? Settings/passes tweaks? Thanks for the vids! Been watching them lately :)

@BuildDadBuild Жыл бұрын

They don't have anything over 3mm listed on their site, so not sure. I haven't cut anything over 3mm... www.xtool.com/pages/material-settings Cheers!

@ChinJazz Жыл бұрын

@@BuildDadBuild Thanks! Much appreciated..

@javelin13 2 жыл бұрын

Did you have to put anything on the red acrylic to make it come out white for the logo?

@BuildDadBuild 2 жыл бұрын

No. That is just acrylic and the laser. Cheers

@hobowner 2 жыл бұрын

I know that there is a problem with clear acrylic, however if you treated it the way you treat glass, do you think that would work?

@BuildDadBuild 2 жыл бұрын

I've seen folks use tempera paint. Washes off with water after the fact. I'm still working on a better solution. Stay tuned! Cheers

@brianrichards6303 Жыл бұрын

I have a quick question, can you cut clear acrylic with the XTool D1? I just tried and it did nothing to the acrylic. I know there is something about colors of the laser as well as the acrylic, but I just don't know. Still learning.

@BuildDadBuild Жыл бұрын

Diode lasers can not cut clear acrylic.

@brianrichards6303 Жыл бұрын

@Build Dad Build before I go waste more money on acrylic, it can't cut cut blue either, right? I want to say thank you for the help you give everyone. It keeps me using my laser and not getting discouraged.

@symplemedia Жыл бұрын

Awesome Video

@adambirkett8377 2 жыл бұрын

I'm looking into purchasing a laser very very soon.... how long does each pass generally take with this laser? All videos I've seen so far are time lapsed so I can't really tell

@jward2389 2 жыл бұрын

Depends on the power and speed setting you choose and the material thickness

@BuildDadBuild 2 жыл бұрын

What John said. It depend on the speed you set the laser to, the material, etc. The reason for the sped up footage is even when it's going fast it's not really that entertaining to wach. Cheers

@adambirkett8377 2 жыл бұрын

Average time? Ball Park figure

@bhutch216 2 жыл бұрын

@@adambirkett8377 ball park would be the total perimeter of the design divided by speed………..

@tonyadalton8312 Жыл бұрын

I watched your video but I am getting completely different results with cutting and engraving. I can cut in one pass at only 80 power but when I tried to engrave at 30 power like you did, mine is very, very faint. But when I go up in power, it’s just blurry. I’m not able to get the pretty white engrave that you got no matter what I try. And I’ve been trying for 7 hours now!

@BuildDadBuild Жыл бұрын

Sounds like you may have a focus issue. Try running speed and power and see what settings look best.

@SgtYnot 4 ай бұрын

basic. depends on type of acrylic for a good engrave. Cast or extruded. Cast for myself seems to work best.

@KingersWorld Жыл бұрын

I have the Xtool D1 Pro 20W laser. I'm trying to engrave on acrylic. Could I also do 30% power at 55 mm/s? Or should I adjust it a bit?

@BuildDadBuild Жыл бұрын

You need to run a speed and power grid and determine the best settings for your laser.

@KingersWorld Жыл бұрын

@@BuildDadBuild That’s what I figured. 😅 Does Xtool have one of those on their site or do I need to find one?

@BuildDadBuild Жыл бұрын

@@KingersWorld www.o2creative.co.nz/laser/lightburn_basic_generator.php

@grady1388 2 жыл бұрын

Nice. I'm looking to get the lazer, think I will be too late for the sale. Which sucks

@BuildDadBuild 2 жыл бұрын

If you can, jump on it! There are some great deals! Cheers

@rachelhalfaker8477 2 жыл бұрын

Way to keep moving forward with showing new things with the XTool D1. I was wondering if you can try to engrave a pair of airpods, well a knock off pair anyway. I have client that wants a pair engraved so figured I'd hit you up. Cheers

@BuildDadBuild 2 жыл бұрын

Hmmm...I'll keep an eye out for some cheapos! Cheers

@meganberntson2741 2 жыл бұрын

Can you try plyglass and the xtool I’m curious if it burned or just engrave with material

@BuildDadBuild 2 жыл бұрын

You can engrave on plexiglass with a transfer agent similar to acrylic. You can not cut clear plexiglass with a diode laser. Cheers

@meganberntson2741 2 жыл бұрын

So no discoloration or burn with xtool. Someone wants something added to there plexiglass then want to use a light strip to show it off

@atbdesignz 2 жыл бұрын

So I am trying to cut 1/8 inch clear plexiglass I am wondering what type of settings should I start out at and I will be using laser box and it does not have any pre-settings for that material is there a particular material I should use in place for the plexiglass

@BuildDadBuild 2 жыл бұрын

As far as I know you can't cut clear plexiglass with a diode laser. It doesn't "see" the material. Cheers

@atbdesignz 2 жыл бұрын

@@BuildDadBuild ok cool if I figure it out I will let you know

@beckyburns7345 Жыл бұрын

when cutting Acrylic can you use the basic software? I have the D1 but it does not show on setting?

@BuildDadBuild Жыл бұрын

Absolutely. They only have some suggested settings. Check this out: cdn.discordapp.com/attachments/664971419506966538/943584320055025744/Material_settings_file_for_xtool_material.pdf

@mossfamily2000 Жыл бұрын

Love the t-shirt!!! Best band in the world!!

@tianaheggins81 2 жыл бұрын

Hi! Did you use the Lightburn program or the Laserbox program for this?

@BuildDadBuild 2 жыл бұрын

Laserbox! Cheers

@tianaheggins81 2 жыл бұрын

Thank you ❤️

@lxxB1GB3Nxxl 2 ай бұрын

Could you recommend me a good “fairly cheap” laser to cut acrylic with? I have a super cheap $150 machine that cuts wood fine, but it doesn’t do anything for acrylic. “Unless I’m doing something wrong setting wise”

@BuildDadBuild 2 ай бұрын

If you want to cut all colors of acrylic you really need to invest in a CO2. I think xTool has one of the cheapest CO2s on the market: www.xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=RyzFeVwU5QGEQ& But it's still gonna run you about $5K

@southernjoes8372 2 жыл бұрын

Thanks for the xTool sales info. Ordered the 20w diode. Are you going to demo it?

@BuildDadBuild 2 жыл бұрын

Absolutely

@steveharris9232 2 жыл бұрын

@@BuildDadBuild I ordered the 20W too, can't wait to get it and see more of your videos.

@MarcAndreMenard 2 жыл бұрын

i have some problem with stainless steel powder coted metal bottle... what are the best setting to engrave it.. witout burning the metal....? thanks in advance

@BuildDadBuild 2 жыл бұрын

I just use the factory settings for coated metal and stainless steel (in Laserbox Basic)...no issues. Cheers

@cindexarandia9477 Жыл бұрын

Hi! I have the M1 I know it’s not exactly the same machine but I really want to engrave acrylic.. I’m in a debate of whether the acrylic needs to be covered/protected in anything?? Or can I engrave directly to the acrylic?! Lol it’s the acrylic that came with the machine when I bought it

@BuildDadBuild Жыл бұрын

Dark colored acrylics can be engraved directly. Lighter colors and clear need some sort of marking agent.

@brentneuhart9824 2 жыл бұрын

Hello i just bought an xtool and was hoping you could do a video on laser bow software? Mosty for text how to make it curve around an image. Or should i upgrade to different software if so can you show how to do cool looking text on that software. Thanks Brent

@BuildDadBuild 2 жыл бұрын

Hey Brent. I will be doing a "Laserbox Basic 101" video soon. But as far as wrapping text? I don't think LB can do that currently. Check out Lightburn (its free for 30 days) and see if you like it. It's the kind of industry standard for hobby laser folks. And it has the capability to wrap text, etc. Check out @louisianahobbyguy on KZfaq. He has a ton of really great tutorials. Also check out my video on how to get Lightburn to recognize the xTool. kzfaq.info/get/bejne/oMedlbak0qyvhGw.html Cheers

@spudhut2246 Ай бұрын

what software are you using? what were your settings? .... projects look good

@BuildDadBuild Ай бұрын

That was a while ago. I think it’s Laserbox Basic. I’ve since moved on to Lightburn.

@jf6720 2 жыл бұрын

Have you had any luck with clear? I still can't zero it in, very hard to etch and nothing close to using colored acrylic.

@dave_made_it 2 жыл бұрын

I used some black washable paint to paint over it and I've used folkart acrylic paint and both came out pretty good

@BuildDadBuild 2 жыл бұрын

Not yet. So far a lot of failed experimenting. But, I'll get it figured out! Cheers

@jf6720 2 жыл бұрын

@@dave_made_it About the same here. Problem is I started engraving on color and I don't think clear can compare with a diode laser.

@michaelhinton 2 жыл бұрын

I have had good results etching clear acrylic with my xTool D1. I tried several methods and think primed metal and etching on bottom side work best. Ping me if you want. kzfaq.info/get/bejne/fLmfocadlpq0ZGg.html

@dave_made_it 2 жыл бұрын

@@jf6720 @Just Me I've had some pretty good results. I do think a significant different is the type of acrylic you use. Im going to find out the two different types and make sure I can't reproduce my results and report back. I use the same laser as @Build Dad Build, the XTool D1.

@Dancopymus Жыл бұрын

Hi Nick, I have a question, perhaps, out of context of the video. Have you ever cut black adhesive with your xTool D1 10watt? If so, what settings did you use to cut the first (sticky) layer of the adhesive? Thanks

@BuildDadBuild Жыл бұрын

I have not. Make sure to check the MSDS and make sure it’s something that is safe to laser.

@ufoquilter86 Ай бұрын

Where…how…when do you use those magnets? I know this is an old video and the link to the Amazon magnets aren’t available, but do you have more info for them for me to search?

@BuildDadBuild Ай бұрын

Any magnets will work. I have found that the companies come and go pretty quick. LOL

@brianrichards6303 7 ай бұрын

Hey Nick, can you cut gold mirrored acrylic with the 10w Xtool? ive tried and can't figure it out. I've tried 100 power 1mm/sec and 3 passes. Any help would be appreciated.

@BuildDadBuild 7 ай бұрын

I don’t think you can cut any ‘mirrored’ acrylic with a diode.

@jasonrowan6497 2 жыл бұрын

Hey love the videos man really insightful. I just received my D1 and was curious how well it does on the acrylic without the air assist? Thanks for all the great content!

@BuildDadBuild 2 жыл бұрын

Hey Jason! You don’t need the air assist to cut acrylic. Just make sure you’re in a well ventilated area. Cheers!

@loulouloucindy 2 жыл бұрын

I really like your videos build dad

@BuildDadBuild 2 жыл бұрын

Thanks Cindy! Cheers

@resinheavencreations Жыл бұрын

Have you tried to do clear acrylic? I have been on the fence with purchasing this model because I do want to use it a lot to cut acrylic.

@BuildDadBuild Жыл бұрын

You can't cut clear acrylic with a diode laser.

@resinheavencreations Жыл бұрын

@@BuildDadBuild do you think the M1 would be a good choice?

@aidasglitzglamz4559 2 жыл бұрын

When I engraved acrylic, it just made a faint mark. I am using pink acrylic. What settings did you use?

@BuildDadBuild 2 жыл бұрын

Different color acrylics are going to get you different results.

@aidasglitzglamz4559 2 жыл бұрын

@@BuildDadBuild I was so irritated I just went back to basswood for now and tumblers. Thank you so much!

@omarpimentel5061 2 ай бұрын

Where can I buy acrylic to cut on the xtool d1 pro, and which ones can it cut ?

@BuildDadBuild 2 ай бұрын

Houston acrylic. Dark acrylics except blue cut well.

@lylebrown6132 2 жыл бұрын

Lol love your opening

@gregwilley Жыл бұрын

Hey Nick! Love the videos! I think you’re the type of guy I would love to hang out and have a beer with! Question: what was the thickness of the green acrylic? Maybe you said in the video and I didn’t catch it. Anyway… always look forward to your videos and the interesting things you create! Take care!

@BuildDadBuild Жыл бұрын

Hey Greg! All acrylic in that video is 3mm. Cheers

@grazie0316 2 жыл бұрын

Just subscribed. You are awesome! Do you thing this machine can cut mirror acryllic? Do you have a video for it?

@BuildDadBuild 2 жыл бұрын

I am not sure yet. I've ordered mirrored acrylic, but I haven't gotten to try it yet. Stay tuned! Cheers

@grazie0316 2 жыл бұрын

@@BuildDadBuild i surely will.just subscribed to you.it means a lot to me to decide if u purchase or not. Waiting for your video- hope you find one soon❤️

@graceland75 2 ай бұрын

I used Blue Acrylic and it would not cut, what other colors are you able to cut through? I have the same 10w machine with the same setting. Thank you

@BuildDadBuild 2 ай бұрын

You can’t cut blue acrylic with a blue diode laser.

@buzzroadguy 6 ай бұрын

Would using the lowering adjustment help to get through in 2 passes?

@BuildDadBuild 6 ай бұрын

If you want.

@melindamcmillan2329 2 жыл бұрын

Can you cut different colors do you think? Like pastel acrylic?

@BuildDadBuild 2 жыл бұрын

The closer you get to transparent the harder to cut with a diode. Cheers

@ILoveAmerica2424 6 ай бұрын

I dont garage, does this type of material cutting make very bad smells to do inside a room of a home? Would an extractor of some kind be needed? Thanks in advance.👍

@BuildDadBuild 6 ай бұрын

Yes you need to use a smoke extractor.

@Mark-oj7yt 2 жыл бұрын

Can you share the link to where you purchased the acrylic?

@BuildDadBuild 2 жыл бұрын

Sure: store.xtool.com/?ref=RyzFeVwU5QGEQ Cheers

@pseebald1 2 жыл бұрын

My D1 will be here today and I think I might have consumed a bunch of your videos. They are super informative and entertaining. I have one question so far. I’ve noticed on some of your circles with your logo in the middle the engraving seems off center from the cut circle. Is this an illusion or an issue with this tool. I am curious because I am still trying to figure out from videos how to perfectly line stuff up. Again thanks for the videos keep it up! Subbed!

@BuildDadBuild 2 жыл бұрын

Usually human error. LOL The cut circle will snap to center around a circular image. Cheers

@pseebald1 2 жыл бұрын

@@BuildDadBuild thanks! I got the D1 and have watched most of your videos. I appreciate it!

@JasonCopeland 2 жыл бұрын

Cheap Wyze wifi cam on my laser helps me keep an eye on my projects remotely.

@BuildDadBuild 2 жыл бұрын

Good tip! Cheers!

@andywhite8657 Жыл бұрын

Hey Nick, added my subscription to your path to 100k. Keep going man. Did I hear right that the speed for the cut was 3mm/ sec? I have a sculpfun s10 and would love trying out acrylic, even though here in South Africa, materials like this in "domestic" sizes is not common or easily available. See you in the next vid - Cheers

@BuildDadBuild Жыл бұрын

That sounds about right. And Cheers!

@elbenja16 2 жыл бұрын

Hey Nick... como estas? Great videos, nice channel. Thanks to you I've had done several wood projects. But here is my question. Do you know what is the best way to cancel xtool for get info about an order? I saw your videos about xtool laser and I decided to purchased one Bundle order.. but the communication with them are terrible... I feel like they scammed me.. Anything you could provide as a info for get in Touch with them?.

@BuildDadBuild 2 жыл бұрын

They just take a long time to respond. They're not scamming you. Cheers

@elbenja16 2 жыл бұрын

@@BuildDadBuild, yeap, you are right. They take some time to respond. They finally did it and now is time to learn how to work this gorgeous laser. Thanks for your videos.. They are very helpful and inspired.