Thank your for a very well done and clear video - your work space and tool collection look really nice!
@zulfitrizulkarnainasnahzul72762 жыл бұрын
i found the best explanation about what I really need guide to cut my steer tube
@JingsWorld3 ай бұрын
Excellent, I’m ready to cut my steerer tube too.👍
@kdl023 күн бұрын
I'm cutting mine right now! 👷😃
@montealtoman Жыл бұрын
really good video, clear and well reasoned. i have left a spacer on top of my stem and now you have explained why this is probably better!
@s2ramz Жыл бұрын
thanks for the tip🍻 needed to cut my steerer too, i hope my stand can keep my bike up while its nose is down lol
@PuffinPass10 ай бұрын
Nice vid *grabs pipe cutter after scratching cut mark with an old pocket knife. Yep, sure will come in handy.😅😅
@puregravy90862 жыл бұрын
Excellent tutorial, thank you.
@paulelkoussАй бұрын
great content!!
@Enigmaafk Жыл бұрын
Well explained, have watch a lot of your videos. And well explained even on a mathematical level on why. So in other words your cut will be level with the stem right. With this cut will their be like a 1mm lip for the 5mm spacer, oppose to move around on reinstallation
@AG17_1 Жыл бұрын
You put a 5mm spacer on top of the stem, marked that height and then took 3mm +2mm (for the bunge) off that mark. Why not just mark at the top of the stem?
@h31sman Жыл бұрын
This. I’m tripping out. Makes 0 sense.
@dyshuk3 ай бұрын
Math works everytime
@KoenStrobbe-fv5us2 ай бұрын
This video is for all configurations - not all expander bungs are the same, so his method shows how to do it regardless of the components.
@AG17_12 ай бұрын
@@KoenStrobbe-fv5usagree but the way it was done made no sense at all. He already had an easy way to measure the 5mm cut (with the spacer) but them measured it without it.
@silvinosalgado2 жыл бұрын
Thank you very much! Very helpful
@jesperlaursen3917 Жыл бұрын
But when you have made your marking with the fork on, why not just substract 5mm from that line?. I think it overcomplicates things having to firstly meassure from your marking to the end of the stem, and then substract that distance +5mm. Is this to make the meassurement more accurate or am i missing something?
@edwinvanvessem3 жыл бұрын
Well explained!
@igorotbaetv89463 жыл бұрын
Thanks for the tip
@ruschi796 ай бұрын
Thanks for the great explication. BTW nice frame! I like it, what is it, a LaPierre?
@frasermckenzie3624 Жыл бұрын
Is it really necessary to cut an additional 3mm off the tube? Surely if I remove 20mm worth of spacers I only need to cut 20mm off the tube. The 3mm will have been already accounted for?
@rob-c. Жыл бұрын
Yes - although that requires it to have been properly in the first place. You could always measure the 20mm and compare to the method shown to be doubly sure. Also - This measuring technique would be necessary if you are changing a stem, to one that has a different stack height.
@ldvcbi4317 Жыл бұрын
Hello, For the expander on a carbon fork there's an "allround" torque? I know it depend of manufacturer but i think there's a general torque will be OK not to much and not to less. For example 5Nm is ok or it can be too much?
@cycleridersk2 жыл бұрын
Hi sir
@joshusanders31272 жыл бұрын
hi do you have one for mtb
@ichallengemydog8 ай бұрын
The 5mm spacer on top isn’t a safety net. It prevents your expander plug from properly supporting the stem. Stop doing it.