How to Cut, Ream, Thread Black Pipe Manual/ Power Treading
Рет қаралды 5,861
3 жыл бұрынI am making a piece of black pipe. I cut the pipe, ream the inside of pipe. Afterward I cut threads into the black pipe. Finally I test the treads, threading a fitting onto pipe. To accomplish the job, a pipe vise, a reamer, and pipe threader.
@alobeeriaz 2 ай бұрын
Thanks for the video! Much appreciated! It seems for the DIYer for around your own house it would make more sense to just buy the precut lengths needed given the tools / cost / effort that it takes to cut and thread your own pipes. I greatly appreciate your making this to show all of this!
@Ted_E_Bear 3 жыл бұрын
The Great Hacker is a Great teacher !
@j.d.6221 3 жыл бұрын
Liking the small tech tips 👌
@tmbruno2539 3 жыл бұрын
Nice!
@leosthrivwithautism 3 жыл бұрын
Hacker, about half way in you have a little editing hiccup. Then it appear like the audio goes slightly out of sink and soon after that the audio is choppy. Just letting you know man. I’m not in the same industry but love your videos man, interesting stuff!
@johnkrim8377 3 жыл бұрын
Very poor example of how to ream a pipe by hand , it's a lot easier if you put the handle to the right and push down than trying to pull up on the reamer to ream the pipe. Also if you had a 2x4 with a V notch cut cut in one end that went from the ground to the handle of your electric threaded you wouldn't have to hold on to it. Looks like your oiler could use some work too .👷🏻
The Excellent Laborer
Рет қаралды 489 М.
TEACH Construction Community Education
Рет қаралды 105 М.
Motion Raceworks Official
Рет қаралды 359 М.
Subodh Sarkar
Рет қаралды 31 МЛН
Ăn Vặt Tuổi Thơ
Рет қаралды 16 МЛН