I would Dremel out with burring tool the casting near the motor connections, giving a greater clearance so no dead shorts occurs, but all in all a great video, my old class 04 ( NOS ) will be next for this conversion...NB, try a countersunk screw in the chassis for soldering...
@tulyar10434 жыл бұрын
A much needed video. For your other 04 loco why not do a total rechassis by using a chassis kit from Branchline trains. Then DCC that one.
@bobpaterson58454 жыл бұрын
Another very informative how to....
@paulredding58642 жыл бұрын
Nice result Jenny, you are v brave IMO doing this live infront of a camera, it would stress me out 😏 I hv 3x Bachmann V3s to do with SC's I bought from Rails on release, so trawling through a few vids on YT to gather info. Soldering isnt my strength either so I use a maglamp as its a big help to check no solder crosses over on those pads. Cheers
@ausfoodgarden4 жыл бұрын
A very nice tutorial Jenny and co. I was a bit worried about chipping my old split chassis loco's but it doesn't look too daunting. I'd better get myself into gear and start chipping them. Big 👍for this.
@adamsrailway4 жыл бұрын
Nice to see how you did it, Jenny. Very clear instructions and a good project to try
@heavyj48054 жыл бұрын
Great job Jenny you sure make it look less complicated, thank you
@mangleytown4 жыл бұрын
You make it look soo easy ! I NEED to get myself in gear and sort out all my class 43's that need converting, myself
@DungeWoodRailway4 жыл бұрын
Hi Jenny Great video, nice explanation of the process. I myself have two Bachmann 03/04 that need converting, so no excuse now to have a go. I also like the idea of fitting a stay alive. Cheers Paul
@lesliedickinson1984 жыл бұрын
That is an awesome video Jenny as i have 2 split chassis loco's so will take this knowledge forward for DCC and ty so much
@peterbell65574 жыл бұрын
You have inspired me Jenny to attempt this with my Bachmann split chassis Jubilee class.
@bionicgeekgrrl4 жыл бұрын
Have several split chassis locos. A number of mainline models have the split chassis design. Panniers ( up to around 2005 or so) and lord Nelson from bachmann have the split chassis.
@quarryjunction-19693 жыл бұрын
Thanks Jennifer hope you are keeping well. Im about to start my new N gauge layout and have been looking how to DCC my own N gauge 04, Thanks for this guide
@WardleRestorations4 жыл бұрын
Exactly the tutorial I needed thank you!
@JenniferEKirk4 жыл бұрын
You're welcome! I'm glad I could help.
@martensiersma33044 жыл бұрын
Some metals i couldn't solder to either. I wound up drilling and tapping them and screwing wires to them.
@nigelcarter95034 жыл бұрын
Really great article, Jenny.
@LeslieGilpinRailways4 жыл бұрын
Clear description Jenny. I'd give it a go but on my US n there's no room for a decoder on the older engines plus would need to upgrade the headlight to a led. Who knows I still might try. Inquizical..... Mmmmm
@JenniferEKirk4 жыл бұрын
Leslie Gilpin I’m going to be recording a video today showing the same process but with their smaller SPP designed for N gauge locos.
@LBTrains4 жыл бұрын
Thank you for uploading this video. Think I'm going to give this a whirl with a J39.
@anj4de3 жыл бұрын
I have a split chasis that is even harder to convert to DCC, a US 4 8 4 steamer with the motor being an internal part of the frame. Very nice loco but very old and also the axles are plastic and all broken. I will most probably end up as a round house queen.
@SammoKarm4 жыл бұрын
CV29 set to 10. Maybe you could be more specific on this as I set my CV29s to disable DC running and have had to also set it to reverse the loco in some cases, After a time I found that some Hornby DCC fitted chips decided to make the motor run in the wrong direction. I've been setting CV29 to a value of 43 when I've had to reverse the polarity to the motor. NO, it wasn't wired wrongly in the first place, this has happened when left in cold storage, when the loft has got cold. I have only had Hornby decoders do this. I've also had Hornby decoders totally die on me as well.
@JenniferEKirk4 жыл бұрын
Sam Barr the reason for setting CV29 is because the SPP won’t work if DC running is enabled.
@ianstrachan76684 жыл бұрын
Inspiring! I have 4 Triang R59s...once I check they run ok on DC, will this DCC decoder work on them (assuming they run ok)
@NathanielKempson3 жыл бұрын
I tried this a few years ago. It worked perfectly. But, i made the mistake of buying Hattons decoders. I had three in the end, and all three blew up the last one killed my class 03 motor outright.
@ianbeamish5452 жыл бұрын
Jenny, when soldering to the dcc decoder what temperature do set the iron to? Ian
@DMZforeverOG3 жыл бұрын
Hi Jenny, love the channel. I need some advice....I have a class 37 R751 Hornby/triang and want to convert to dcc....can you help or advise where to solder the 4 wires? Thanks in advance
@davidcrouch52724 жыл бұрын
Great video I have some old Hornby and Triange Locos I need to look at converting do Train O Magic supply Decoders in the US do you know?
@JenniferEKirk4 жыл бұрын
David Crouch I don’t know if they have a US supplier, but they may be available to buy from here and ship to the US.
@SammoKarm4 жыл бұрын
Is there a CV for doing an auto tune of the back emf, for example ESU decoders use CV 54 to 0 then press F1 to do an auto tune.
@kayechorley83734 жыл бұрын
Jenny ,where did you get your Wear Rd plaque that is on the wall,?love your KZfaq stuff,l am a lady model railway enthusiest,much to the horror of my BRMA group in Australia.
@JenniferEKirk4 жыл бұрын
Kaye Chorley it was bought for me as a present. I believe it is from a company online, but I don’t have the details.
@frankfeely92354 жыл бұрын
where there's a will there's a way.
@davidwatts18714 жыл бұрын
I'm sorry, but don't waste you're money, time and effort. With the split axles, once the quartering goes, and it usually does especially on Mainline/Palitoy locos, they'll never run nicely again, you always get a slight wobble.
@JenniferEKirk4 жыл бұрын
David Watts on old ones that can be a problem but some do seem to last. This 04 I used was in really good condition and represents the final releases from Bachmann. The decoder and SPP can be removed and moved to a different loco at a layer date quite easily should the need arise, so aren’t wasted.
@davidwatts18714 жыл бұрын
@@JenniferEKirk Not had much to do with Bachmann split chassis, but certainly Mainline ones are getting terrible. After all they are 40 years old now. I've had at least 4 fail on me in the last year all with the axles slipping and coming apart especially on the drive axle. Which is a shame because they were really nice locos for the time.