No video
How To Decap Injectors- Turbo K20 6psi PULLING HARD!!
Рет қаралды 3,999
Күн бұрынIn this video i explain how to decap injectors and pull through the gears and it gets rowdy! If you enjoy the video please hit like, Share and subscribe!!! GOD BLESS, Stay safe, Stay Awesome!
Link to Autool machine
amzn.to/3oMAuRT
Link to Michael Sengvixay Remote tuner/Good friend
/ msengvixay620 tell him Texas Honda Channel Sent you
/ msengvixay tell him Texas Honda Channel Sent you
LINK TO SUBSCRIBE TO MOORE MOTORSPORTS (PAINT / MODS CHANNEL)
/ jamesdguy
If you wanna donate to the channel (ANYTHING HELPS!)
I also have cashapp $Jamesdguy Not required but helps a lot!
Paypal donations
paypal.me/moore...
No more fan mail or P.O BOX AT THIS TIME.
IT WAS GETTING TOO EXPENSIVE TO KEEP OPEN FOR ME BECAUSE I WAS
NEVER RECEIVING ANY FAN MAIL. HOPE YOU UNDERSTAND.
DON'T FORGET TO HIT LIKE AND SUBSCRIBE! IT HELPS THE CHANNEL A LOT!!!
#acuratl #subscribe #kswap
@phillipcladis5454 2 жыл бұрын
I love the grass roots topics, thanks for another useful and informative video for us k series believers!
@TexasHondaChannel 2 жыл бұрын
No problem! I love all Honda engines except the A series accord engine but all others are good in my opinion lol
@phillipcladis5454 2 жыл бұрын
@@TexasHondaChannelwatching along and building fresh optimism for the "economy" k variants too! So many possibilities I hadn't considered, k20a3 and a k24a1 sitting in the shed whilst the garage is full for now
@StoneyBrownTV 2 жыл бұрын
Can't wait to see it on the dynamic and then on the track!
@hondanubs6445 2 жыл бұрын
I'm also glad you're a god believing man and it shows. God bless you and your family man.
@TexasHondaChannel 2 жыл бұрын
Nothing will change that I won’t fake who I am for views or anything. I am happy to share my love 😁
@hondanubs6445 2 жыл бұрын
I really appreciate that about you and your channel man 👍 and like you say God bless, stay safe, stay awsome man
@TexasHondaChannel 2 жыл бұрын
@@hondanubs6445 Amen 🙏🏻
@hondanubs6445 2 жыл бұрын
Man you're doing a awesome job on that ol truck. I love the build man. Keep up the awesome work.
@theg-zguy5268 2 жыл бұрын
Great video and information 👍 thanks for all your hard work you put into your channels. God bless and keep up the awesome job 🙏
@TexasHondaChannel 2 жыл бұрын
Thank you man and can’t wait to see your channel blow up!
@RipYuTube 2 жыл бұрын
Can’t wait to see kazda on the dyno !
@TexasHondaChannel 2 жыл бұрын
Same!
@rstuff1605 2 жыл бұрын
I remember easing into wot in 1st then click the sport button in 2nd in a rwd catera touring sedan for a 0-40 in 2 seconds and to 40-60 4 seconds later lol
@TexasHondaChannel 2 жыл бұрын
I really can’t wait to get my GPS speedometer so I can see what it does
@HoMiE327 2 жыл бұрын
Might need to do this for my TL-S seems interesting... like you said, definitely need to get a tuning solution to gain the benefits out of it
@TexasHondaChannel 2 жыл бұрын
yes works great with TLS injectors and tune is 100% necessary
@jwagon85 2 жыл бұрын
Sound nice.. can’t wait to see what number it put down
@TexasHondaChannel 2 жыл бұрын
Yea same here but I never get my hopes up because numbers aren’t always the same for every build and they don’t define the build unless your making it a Dyno Queen where it’s just made to put numbers down and that’s all lol
@jwagon85 2 жыл бұрын
@@TexasHondaChannel your right about that bro. Keep up the good work on the truck
@GlassWerx 2 жыл бұрын
Ready to see some dyno runs
@TexasHondaChannel 2 жыл бұрын
You and me both!
@GlassWerx 2 жыл бұрын
@@TexasHondaChannel looks and sounds good. I'm ready to have all my air ride done. Gotta wait till Monday n get part warranty swapped
@TexasHondaChannel 2 жыл бұрын
@@GlassWerx I would love to do air ride man!
@GlassWerx 2 жыл бұрын
@@TexasHondaChannel we may be putting wife's ranger on air also.
@GlassWerx 2 жыл бұрын
@@TexasHondaChannel check out the website review on my page for procivic. They have like 3 different sub companies awesome ppl to deal with. Bought my air ride thru them months ago n had few issues with the kit I just found they got it taken care of. Now waiting on truhart to get back to me about replacing my manifold. I also got some air ride install videos on my channel just don't have the final one yet bc my manifold is messed up and only airs up on one side.
@mrobsolete530x4 2 жыл бұрын
I didn't realize how early I was to this video until I saw it only has 19 views right now
@TexasHondaChannel 2 жыл бұрын
Congrats on being early 😁
@rstuff1605 2 жыл бұрын
I liked this one too. I was checking out the new sonata turbo 2.5 liter making 290 hp. I got to thinking has to have 300 cc ...atleast i think. I would put 300 320 stock on a regular engine
@TexasHondaChannel 2 жыл бұрын
300cc is a lot of fuel for a stock setup but for turbo it’s not much unless the turbo is small. Either way I love how it’s turning out and 1000cc going in soon!
@rstuff1605 2 жыл бұрын
Oh ok lol. I was wondering if that would be slowing the low end flow like running 3 inch exhaust on a b18b
@TexasHondaChannel 2 жыл бұрын
@@rstuff1605 I have small exhaust for daily mode (I have a 3 inch dump pipe) I just need to wire it up but waiting on shipping then it should be quicker on low end.
@rstuff1605 2 жыл бұрын
My friend had 650s on a donut size turbo b16 si and i saw a mech driving it with a burn damaged hood 6 months later. He said it was dyno tuned to 450 hp then blew up. My other friend didn't see it happen he told me but that hood and the soumd of the engine seemed like "yeah that's gotta be it" lol
@Shadow0fd3ath24 Жыл бұрын
mount the grinder in the vise, then spin the tip of the injector at a 45* angle while pushing it into the disc...much easier!
@bleach_drink_me 9 ай бұрын
Thinking of trying this with the old set of stock injectors i took out of my G35 years ago just for giggles.
@str4ypanda 2 жыл бұрын
I hope more people look at the information you bring to the table. I am very much inspired by what you do, good sir! Also... Do you think the decapped injectors would help my stock EP3?
@TexasHondaChannel 2 жыл бұрын
Thanks man and the stock injectors work great for the stock setup but if you added some boost then definitely
@daurysd8402 2 жыл бұрын
You could have done a vtec killer set up using type s cams and accord rockers
@TexasHondaChannel 2 жыл бұрын
The setup isn’t finished yet I do what I can when I can. I don’t do it all at once like most youtubers. I go with the flow and already planned on doing vtec killer
@2StallGarage 2 жыл бұрын
Sounds beastly. Would be fun to see a run down a track vs a standard setup. How much impact do you think it have on overall fuel mileage and lower RPM running times? Nice work. 👍
@2StallGarage 2 жыл бұрын
Never mind on the engine running in the lower RPMs. Nice tech work!
@jaybirdvc15 2 жыл бұрын
That pools!
@JD-rq7il 2 жыл бұрын
75% more fuel compared to capped. Not a bad increase for free! Did you run all 4 decaps against each other on the flow bench? Generally you want to decap 6-8 injectors to get 4 to be really close to flow matched.
@TexasHondaChannel 2 жыл бұрын
Yes they are flow tested and all flow within 1% difference of each other they are as even as I can get them
@dragonmantuning3792 2 жыл бұрын
Thank you for putting the dead times up
@mobilebeeler 2 жыл бұрын
If you change that small filter to a large 12 long high flow filter, you'll get like 10% more flow. Something about surface area in the filter intake surface area. Its like it becomes part of your turbo because of some vac to pos psi formula. Corkey bell explains it better. He has an old book you get for free download. And dont just run open turbo. Im telling ya. You'll even see a difference on your wideband.
@TexasHondaChannel 2 жыл бұрын
Yes you are correct. I won’t be running this filter I have a large K&N it’s just not installed currently and once I get serious out the power I’ll be swapped that out and opening the 3 inch dump pipe
@timborice22 2 жыл бұрын
I havent heard about this in like 12 years, good stuff. Hey do you have any tips on how to increase my lower end acceleration in my stock 98 crv, I'm pretty sure its low comp usdm b20 all stock. I dont need to go fast but man, when the guy in front of you turns without warning, I gotta drop gears and sometimes Its either rev the hell out of it or not have enough balls lol
@TexasHondaChannel 2 жыл бұрын
Yea they definitely need more low end and free flow exhaust and intake are the best mode to increase low end. A tune would be the best way though
@timborice22 2 жыл бұрын
@@TexasHondaChannel ok thanks intake and exhaust were on the list, I was told to advance the dizzy but im hesitant to mess with it
@n.kempland2825 2 жыл бұрын
This truck continues to impress me and your DIY skills impress me more. I love this thing. Keep up the good work, James! A full tune once this thing is dialed is really gonna wake it up. It's already impressive as is! What are you revving to?
@daurysd8402 2 жыл бұрын
Or even rsx type s pistons and rods
@tjjohnson4397 8 ай бұрын
I wonder how would a set of decap rdx injectors would flow
@SikkRaz3r Жыл бұрын
Why did you flow the decap after? Or keep track of them stock, then flow decapped see what they gained
@timborice22 2 жыл бұрын
Dang man, Mazdonda. Or Hondazda lol Mohanzda 🤷♂️
@TexasHondaChannel 2 жыл бұрын
You see the badges? It says KAZDA K swap Mazda
@timborice22 2 жыл бұрын
@@TexasHondaChannel oh yeah I forgot that lol
@cryabo 2 жыл бұрын
How bout b-series injectors? Same principle? And what would new cc size be? 440?
@TexasHondaChannel 2 жыл бұрын
B series are 240cc stock and not sure on the B series I haven’t done them before and I’m not 100% certain the match is right on the current injectors I did but I’m sure somewhere out there is proper information on how to calculate the injector size.
@cryabo 2 жыл бұрын
Thx.. I got a set lying around, maybe I’ll try it
@TexasHondaChannel 2 жыл бұрын
@@cryabo definitely let me know how it goes
@Irrelevantskill 2 жыл бұрын
wait... did you put an a3 in that truck? or why did you use a3 injectors?
@TexasHondaChannel 2 жыл бұрын
k20a3 it’s all I could afford and find in the junkyard also the a3 injectors is all I have: I work with what I have and upgrade slowly. I’m not like these infinite income youtubers who can just afford 2000cc injectors and do it all at once with name brand parts and best of the best. I’m a realist lol
@Irrelevantskill 2 жыл бұрын
@@TexasHondaChannel I mean it isnt the best engine but I have an a3 also. I track my car. Idc what you got. Work with what you have I just didnt know it was an a3 and I was stunned. Most don't use them.
@TexasHondaChannel 2 жыл бұрын
@@Irrelevantskill yea they may not be the best K series but pulls hard for me 😁👌🏻
@_c_y_t Жыл бұрын
im doing the same, but did u had to play around with the dead time or u just left it at stock deadtimes? using same exact decap as urs? lmk
@dr.mantistoboggan4746 2 жыл бұрын
Doesn't this mod destroy the atomization though?
@bleach_drink_me 9 ай бұрын
Depends on the injector. Some the answer is yes. Others the answer is slightly. I have read that Bosch injectors have the least variance and best spray patterns after this mod. Idk from experience but that is just what I have read.
@sir.johndeere8894 2 жыл бұрын
Do you have to put rhe plastic top parte back again? Mine broke off while taking them off
@jmorin2270 2 жыл бұрын
No comment 😂
@dragonmantuning3792 2 жыл бұрын
No
Texas Honda Channel
Рет қаралды 1,8 М.
Sergio Outdoors
Рет қаралды 52 МЛН
Adam FabCo
Рет қаралды 27 М.
C Plus Racing
Рет қаралды 4,5 М.