How To Design A Ball Bearing In Autodesk Fusion 360

How To Design A Ball Bearing In Autodesk Fusion 360 | Within 5 Minute

Рет қаралды 10,128

3 жыл бұрын

In This Video We Are Going To Draw Ball Bearing In Fusion 360
Under 5 minutes
Get Fusion 360 :- autode.sk/11CfIDv
#autodesk
#fusion360
#ballbearing

Пікірлер: 13

@4funrc11 3 жыл бұрын

Sweet! 👍 Thank you. Now all I have to do is figure out clearances / tolerances to 3D printing. 😃

@vyshakc344 3 жыл бұрын

Powli

@usd9856 3 жыл бұрын

❤️

@albertjoseph5808 3 жыл бұрын

Super 👌

@benjamincffoster4574 10 ай бұрын

Thanks very helpful!

@pietrononame4945 2 жыл бұрын

Very fast design. Because you want the outer and inner ring to move independently ;)

@Sachii2401 3 жыл бұрын

കഴിവുള്ളവർ ഉന്നതിയിൽ എത്തട്ടെ 🔥

@edgecrise 3 жыл бұрын

Can u add 2D drawing and lengths of these designs those you share into the video explanations

@edgecrise 3 жыл бұрын

İf you have can you do?If you don't have,you can't share that And will u share more video about designs in FUSION 360

@venkateshraju8234 3 жыл бұрын

if I 3d print this. will it work properly?? ill add lubricant later.

@dannyz6vog 2 жыл бұрын

did it work ?

@gowfster1 Жыл бұрын

I presume this wouldn’t operate as there is zero clearance between ball bearing and race, and will likely fuse when printing… unless I missed a downscaling of the ball before it was rotated into a solid.

@geauxracerx Жыл бұрын

We print functional bearings all the time that work quite well. They do have shorter life spans, but they still function. There are ways to extend that lifespan. There is no need to print in place. The parts can be assembled just as easily as any other bearing set