How to Design a PCB from Scratch with EasyEDA | COMPLETE Tutorial | JLCPCB LCSC ALIEXPRESS

How to Design a PCB from Scratch with EasyEDA | COMPLETE Tutorial | JLCPCB LCSC ALIEXPRESS | 2022

Рет қаралды 185,977

Күн бұрын

In this week's episode of tech Tuesday we would look at how to design a PCB with EasyEDA. This video is mainly focused on how to go from having a schematic diagram to PCB.
From Idea to Schematic to PCB - How to do it Easily | How to Design a PCB easily with EasyEDA & JLCPCB - Complete Tutorial | Printed Circuit Board Design - Beginner Step by step 2022
Link to FL5150 data sheet here : www.mouser.com/datasheet/2/14...
----------------------------------------
Channel Gear and Equipment's (Affiliate)
Amazon : www.amazon.com/shop/nerdbishop
AliExpress
~~~~ Multimeters ~~~~
UT61E Plus Multimeter
s.click.aliexpress.com/e/_AK3GEo
UT204 Plus Clamp Multimeter
s.click.aliexpress.com/e/_9ihxKq
~~~~ Lab Bench Power Supply ~~~~
RD6018W 60V 18A Bench Power Supply
s.click.aliexpress.com/e/_Act4hO
~~~~ Oscilloscope ~~~~
DSO FNIRSI PRO Oscilloscope
s.click.aliexpress.com/e/_ATrDZM
~~~~ Soldering and Welding Kit ~~~~
KSGER T12 STM32 V3.1S Electric OLED Soldering Station
s.click.aliexpress.com/e/_AFoQjw
DH30 Battery Spot Welder Kit
s.click.aliexpress.com/e/_A0qKwJ
~~~~ Testers ~~~~
USB Adjustable Discharge Load
s.click.aliexpress.com/e/_9HFFwe
RD UM34C USB Tester
s.click.aliexpress.com/e/_9H0yI0
USB Tester with Current Voltage Indicator
s.click.aliexpress.com/e/_9frmaK
Qualcomm - QC2.0 & 3.0 9V / 12V / 20V Trip Simulator
s.click.aliexpress.com/e/_ANg1iG
~~~~ Others Tools ~~~~
Xiaomi Mijia Screw Driver Kit
s.click.aliexpress.com/e/_AeEkhC
Non-slip Metal Scalpel Knife Set with 40 Blades
s.click.aliexpress.com/e/_AmSdJe
----------------------------------------
There would be two other video parts later on that would be focused on how to order the pcb from JLCPCB, acquire the parts needed for the pcb developed in this video from LCSC and ALIEXPRESS and finally how assemble the parts and test the final product. PCB from schematic | schematic to pcb | pcb design software | pcb design tutorial for beginners
Hope you learn something new, cheers!!!
Kindly support us on patreon here: / delali
Don't forget to LIKE, SHARE and SUBSCRIBE
Follow us @diydelali on Facebook, Twitter and Instagram
Channel Theme Song: Entire by Quincas Moreira
#pcb #easyeda #jlcpcb #lcsc #esp8266 #nodemcu #arduino #wifi #repeater #delali #design #innovation #maker #diy #science #technology #stem #designthinking #electronics #electricity #hobbyist #enthusiast #stayhome #staysafe #wifirepeater #hack #espressif #microcontroller #embedded #embeddedsystems #software #wiring #schematic #routing #track

Пікірлер: 353

@Terragea 2 жыл бұрын

@Delali, I was considering paying $90 for a Udemy EasyEDA course. With your two excellent videos, I think I can skip that for the moment. Looking forward to more videos!

@Delali 2 жыл бұрын

Thanks so much for your kind words. I really appreciate them. I will surely work on more videos like this. Comments like yours inspire me alot. Cheers!!

@pakfones Жыл бұрын

So should show your support to @Delai by donating a cup of Tea, I already subscribed as a support for his hard work.

@mauriceaz4201 3 жыл бұрын

Definitely one of the best video I ve seen. No loud music, very clear explanations, and nice tutorial. Very professional!

@Delali 3 жыл бұрын

Thanks fam. Much appreciated. Kindly don’t forget to subscribe. Cheers!!

@nithinsai2250 2 жыл бұрын

buddy did u understand why he applied ground net at 27:50 ? why at the specific area only?

@mikesmuseum 3 жыл бұрын

This video delivers. So many tutorials fail to go into detail concerning placing and connecting a Via, changing the Track width, changing layers, and other little things that come up while laying out a board. This is truly a 'start to finish' type video. I sure appreciate your in-depth explanations.

@Delali 3 жыл бұрын

Thanks for the kind words fam. Comments like yours inspire me and lets me know to keep up the good work. I appreciate you taking the time to let me know your thoughts. Happy New Year Fam.

@nithinsai2250 2 жыл бұрын

buddy did u understand why he applied ground net at 27:50 ? why at the specific area only?

@diydixit 4 ай бұрын

This is the only video someone needs to watch to make a pcb . To the point and all tiny details are given . Just amazing.

@user-io8rh2sq4y 3 ай бұрын

Amazing tutorial to follow!

@alistairmurray626 Жыл бұрын

Just what i was looking for! Thanks! :D

@Delali Жыл бұрын

Glad I could help! Kindly let me know how your designs go. Please don't forget to subscribe. Cheers!!

@datech6274 3 жыл бұрын

This is wonderful! Thanks very much for this.

@Delali 3 жыл бұрын

You're welcome fam. Am glad you like it.

@odb7393 2 жыл бұрын

Excellent tutorial! Thank you!

@Delali Жыл бұрын

You're very welcome! Please don't forget to subscribe! Cheers!!

@RestoreTechnique 2 жыл бұрын

Amazing tutorial, so helpful! Great teacher 👏

@Delali 2 жыл бұрын

Glad it was helpful! I appreciate your comment fam. Merry Christmas.

@dcallaway0604 3 жыл бұрын

Outstanding! Thank you

@Delali 3 жыл бұрын

Thanks for the kind words. Cheers!!

@TomTom-ty5ej 11 ай бұрын

Fantastic! I learned much!

@Delali 10 ай бұрын

I'm glad you found this video helpful. Please don't forget to subscribe!

@jeevakkuwar 3 жыл бұрын

Now This is what any tutorial should be like. Nicely done, very thorough.

@Delali 3 жыл бұрын

Glad it was helpful! I'm really inspired by your comment. Merry Christmas fam. Please don't forget to subscribe!

@ryanmckenna2047 2 жыл бұрын

Great video man!

@Delali 2 жыл бұрын

Thanks so much. I'm glad you like it.

@Dirt33breaks 11 ай бұрын

Brilliant video!!

@Delali 10 ай бұрын

Glad you liked it! Please don't forget to subscribe!

@mywschool8910 2 жыл бұрын

Helpful video. Thankx.

@Delali 2 жыл бұрын

Glad it was helpful! You're the best. Please dont forget to subscribe. Cheers!!!

@davidc9441 2 жыл бұрын

Great vid. Just the right level of detail. Thank you

@Delali Жыл бұрын

Glad you liked it! Thanks for the feedback. Please don't forget to subscribe! Cheers!!

@armin.hierstetter 2 жыл бұрын

Awesome video - exactly what I was looking for. A quick overview of the whole process. Subscribed!

@Delali 2 жыл бұрын

Awesome, thank you! You're the best. I'm also glad this video was of help.

@maks1o 2 жыл бұрын

Thank you. Subscribed!

@Delali 2 жыл бұрын

Thanks for the sub! Happy new year buddy.

@victorokechukwu315 5 ай бұрын

Thanks for this video, very professional

@Prof.JesusPalacios 2 жыл бұрын

Great video!

@Delali 2 жыл бұрын

Glad you enjoyed it. Thanks so much. Please dont forget to subscribe. Cheers!!

@isaacatia-abugbilla2476 4 жыл бұрын

Wonderfully done.

@Delali 4 жыл бұрын

Thank you! Cheers!

@andreeaedwards-jeanaugusti3670 Жыл бұрын

great video and explanation!

@Delali Жыл бұрын

Thanks so much. Glad you liked it! Please don't forget to subscribe. Cheers!!

@hirnamputierter 3 жыл бұрын

Thanks for sharing your knowledge! Great video 😀

@Delali 3 жыл бұрын

Glad it was helpful! Please don't forget to subscribe. Merry Christmas!

@design8studio 10 ай бұрын

Wow, great video. Thank you.

@Delali 10 ай бұрын

Glad you liked it! Please dont forget to subscribe! Cheers!!

@lifewithkingsley6698 Жыл бұрын

you're doing great bro, thanks.

@Delali Жыл бұрын

Thank you bro. I appreciate that! Please dont forget to subscribe. Cheers!!

@yusy4501 4 жыл бұрын

great tutorial!

@Delali 4 жыл бұрын

Glad you think so! much greatful.

@user-hu8cn9uj4t 3 жыл бұрын

Appreciate so much. Very well organized tutorial.

@Delali 3 жыл бұрын

Thanks buddy. Please don’t forget to subscribe. Cheers!!

@roguetimz 3 ай бұрын

Sabi boy Africans can’t disappoint. Very clear and concise explanation. Thank you for this man

@hebl47 3 жыл бұрын

Thank you so much for this video! You saved me so many hours trying to figure out things myself (and some I would never have known they exist - like changing the model type). Also I think the pacing of the video is just right.

@Delali 3 жыл бұрын

Thanks for the kind words fam. Comments like yours keep me inspired. Really appreciate your effort to write your experience. Cheers!!! Please dont forget to subscribe.

@wteelev 2 жыл бұрын

This was an awesome tutorial. Thank you.

@Delali 2 жыл бұрын

Glad it was helpful! You are very welcome. Please don't forget to subscribe. Cheers!!

@TheQuasarman 3 жыл бұрын

Excellent tutorial, very clear and one of the best I have seen. Thank you very much!

@Delali 3 жыл бұрын

Wow, thanks! Glad it was helpful fam. Happy new year to you. Please dont forget to subscribe.

@souflikar6702 3 жыл бұрын

Thank you for taking the time to share this. What a great application and a wonderful tutorial! Thanks again.

@Delali 3 жыл бұрын

Thanks for the kind words friend. I'm glad this video of could help. Please dont forget to subscribe for more. Cheers!!

@Lyndon_K Жыл бұрын

Great job on the video, it was very well done. Thanks very much and Salome!

@Delali Жыл бұрын

Thanks for the kind words. Glad you enjoyed it! Please don't forget to subscribe. Cheers!!

@husainmanu5664 2 жыл бұрын

very use full thanks

@Delali 2 жыл бұрын

Happy to help. Please don't forget to subscribe. Cheers!!

@barbomonaretta8261 6 ай бұрын

Thank you very much for this excelent tutorial.

@Delali 4 ай бұрын

Glad it was helpful! Please dont forget to subscribe. Cheers!!

@frankdearr2772 10 ай бұрын

great, thanks for sharing 👍

@Delali 10 ай бұрын

Thank you too. Cheers!! Please don't forget to subscribe!

@MrMaxximus77 8 ай бұрын

Your explanation is really super straightforward and above all understandable. Thanks a lot!

@Delali 4 ай бұрын

Thank you so much. Glad it was helpful! Feedback like yours is why i keep making videos❤️ Please dont forget to subscribe. Cheers!!

@danielofoe337 2 жыл бұрын

Thank you boss .You are God sent

@Delali 2 жыл бұрын

So nice of you. Please don't forget to subscribe. Cheers!!

@Bianchi77 Жыл бұрын

Cool video, thanks :)

@Delali Жыл бұрын

Glad you liked it! Please dont forget to subscribe.

@matthewjerdidahhansen7331 3 жыл бұрын

Bro this is very comprehensive ... you make engineering feel easy and understandable

@Delali 3 жыл бұрын

Haha. I try. Thanks for the kind words brother.

@ibtissemameur3302 7 ай бұрын

Thank you for this lessons! a very interesing video .

@Delali 4 ай бұрын

Glad it was helpful! Thanks for the kind words and for the feedback. Please dont forget to subscribe. Cheers!!

@geeuk Жыл бұрын

Thank you, brother! Very helpful video. Great teacher you are.

@Delali Жыл бұрын

Thanks so much for the kind words. Merry Christmas and happy new year in advance. Cheers!!

@woutdezeeuw1604 2 жыл бұрын

An easier way of adding via's is to simply draw a track on the top layer, and when you encounter an obstacle, you click to create another node where you want the via to be, and then switch to the bottom layer, and it will automatically create a via for you right where your last node is. Then you keep on making your track on the bottom layer, and when you want to switch back, you switch to the top layer again, and it will create the second via. Not sure if this is a new feature that wasn't available back then, but in the current version it works like that. Thanks for the great video!

@Delali 2 жыл бұрын

This is an eye opener for me and hopefully a lot of people. I didn't know what you just explained exist until just now. I tried it and it works just as you mentioned. Thanks so much. I'm gonna make another EasyEDA video and use this new approach in it together some other new tricks I've picked up. Thanks so much once again fam. Much Love💗

@Rocksetta 2 жыл бұрын

Nicely done.

@Delali 2 жыл бұрын

Thanks for the visit and kind words. I appreciate you taking the time to leave a comment. Cheers!!

@illukpitiya 4 жыл бұрын

That was a very nice Video, I learnt a lot. Thank you !

@Delali 4 жыл бұрын

Glad it was helpful! Thanks for watching. Kindly check out our other videos, maybe you'd find something you like

@gregologynet 3 жыл бұрын

Thank you, this is great and exactly what I was looking for. I was getting really confused trying to work this out by myself and you made it easy

@Delali 3 жыл бұрын

You're very welcome fam. Glad it helped! Please dont forget to subscribe. Cheers!!

@nithinsai2250 2 жыл бұрын

buddy did u understand why he applied ground net at 27:50 ? why at the specific area only?

@rodcallison9245 3 жыл бұрын

Excellent tutorial. Helped me a lot in getting started.

@Delali 3 жыл бұрын

Glad it helped. Kindly dont forget to subscribe. Cheers!!

@kofirobert64 3 жыл бұрын

Very well explain. Thank you

@Delali 3 жыл бұрын

Glad it was helpful! Kindly check out some of the other videos on the channel. Cheers!

@leoncloete1441 4 жыл бұрын

Thank you !

@Delali 4 жыл бұрын

You're welcome! Thanks for watching. Hope this video was helpful?

@stefanlammert6400 3 жыл бұрын

This tutorial is very interesting and comprehensive. After watching I've been able to design my first pcb. :-) Thank you very much.

@Delali 3 жыл бұрын

Amazing. Thanks for the kind words. Please dont forget to subscribe for more. Cheers!!

@Sarahbuildsstepsequencers 2 жыл бұрын

THANK you SO much for this helpful tutorial! It’s exactly what I need because I don’t know how to do this. I can’t wait to get started with my project! On my channel, I show my DIY step sequencers. This will make building them so much easier! Thank you, thank you!

@Delali Жыл бұрын

You are so welcome! Some cool videos you got there.

@megatronmike1334 3 жыл бұрын

Much love brother I've learned exactly what I needed you are a God send, Best tutorial I've watched , subbed and thumbs up looking forward to checking out your other content!

@Delali 3 жыл бұрын

Awesome, thank you so much!

@David.AVelez 4 жыл бұрын

Now THIS is thorough. Kudos, Delali! You are an awesome resource for any Programmers looking to build. Great Job! #Whatsappsquad!

@Delali 4 жыл бұрын

Wow, thank you!

@karlvalgeirjonsson2810 2 жыл бұрын

Best understandable video I have seen. Thank you for a very audible tutorial. I learned a lot.

@Delali 2 жыл бұрын

Thanks for the kind words Karl. I'm glad this video was of help. Please don't forget to subscribe. Thanks very much. Cheers!!

@josiahadesola 2 жыл бұрын

Excellent video

@Delali 2 жыл бұрын

Thank you very much! Please don't forget to subscribe. Cheers!!

@pauludrea4082 Жыл бұрын

Thank you Delali. Very well explained in a logical sequence.

@Delali Жыл бұрын

Thanks so much for the feedback.' Comments like yours keeps me going. Merry Christmas and happy new year in advance. Cheers!!

@techtinkerin 2 жыл бұрын

This is by far the best video on easyeda 😃 liked and subscribed!!

@Delali 2 жыл бұрын

Thanks so much for taking the time to leave this comment. It means so much to me fam. You're the best. I really appreciate your efforts.

@md.torikolislam3855 3 жыл бұрын

The Best video tutorial I have ever seen

@Delali 3 жыл бұрын

Thanks for the kind words brother. I appreciate you taking the time to leave this comment. You're the best. Cheers!! Please dont forget to subscribe.

@bobriscione2904 3 жыл бұрын

Thank you very much! this is so useful, and now I have a good, working PCB. Thanks!

@Delali 3 жыл бұрын

Thats amazing fam, Thanks for the kind words. Please dont forget to subscribe. Cheers!!

@nithinsai2250 2 жыл бұрын

buddy did u understand why he applied ground net at 27:50 ? why at the specific area only?

@AbidemiAAjayi 3 жыл бұрын

Nice job. Very clear explanation.

@Delali 3 жыл бұрын

Glad it was helpful! Really appreciate you taking the time to leave a comment. Please dont forget to subscribe. Cheers!!

@alexgreen121 Жыл бұрын

@Delali, thank you very much this tutorial is excellent it answer all my questions and showed me how to it properly. Thank you!!!!

@Delali Жыл бұрын

Im happy this video was helpful to you. Thanks for the feedback fam. Please dont forget to subscribe.

@FeuFabricio 3 жыл бұрын

This guy is a legend! Thank you!

@Delali 3 жыл бұрын

Really appreciate you taking the time to leave this comment. It keeps me inspired and lets me know my work helps people out there. Cheers!!

@FeuFabricio 3 жыл бұрын

@@Delali Just ordered my first PCB!! Thanks again. By the way, if I may, I would suggest a video about the SMT assembly process.

@Delali 3 жыл бұрын

@@FeuFabricio Thanks for the suggestion fam. I really appreciate your effort to share. I will look into that. Please don't forget to subscribe. Cheers!!

@vornamenachname1796 Жыл бұрын

Thank you very, very much. This is the Video i needed !!! 👍 greetings from germany

@Delali Жыл бұрын

Glad it was helpful! Danke sehr Please don't forget to subscribe. Cheers!!

@aripjamaludinrumi 17 күн бұрын

thanks , the schema seems similary to my needs.

@eddiejones8709 2 жыл бұрын

Fantastic video. I definitely learned a great deal from your presentation. I am looking forward to other videos. Thanks again for all your efforts.

@Delali 2 жыл бұрын

Glad it was helpful and thanks for the kind words. I appreciate you taking the time to leave this comment. Have a good one.

@EdwardPie 3 жыл бұрын

Nice work

@Delali 3 жыл бұрын

Thanks fam.

@ErCanEverything 2 жыл бұрын

Good video thanks for sharing👏🤝🤝🤝

@Delali 2 жыл бұрын

Welcome 👍 Thanks for the feedback.

@tettehedemmalvinebenezer8956 4 жыл бұрын

Great work bro

@Delali 4 жыл бұрын

Thanks for watching. Hope you learnt something

@JohnGin. 3 жыл бұрын

Hi Delali, many thanks for this video! Mainly thanks to it, I learned to use EasyEDA a bit and I created my first PCB in one day :-) Before that I tried KiCad and Eagle, but without success. One tip - as I found out, the track through the bottom layer can be made easier - just start on the top layer, after clicking to the point where I want to have a Via switch to editing the bottom layer, continue the track to the next via place, switch back to the top layer and complete the connection. The vias are created completely automatically :-)

@Delali 3 жыл бұрын

Am very happy to hear your success story. Am glad this video was of help to you and thank you very much for the tips. I will try to put that in my next video. Please dont forget to subscribe.

@anokhautomation4453 Жыл бұрын

Very very useful 👍

@Delali Жыл бұрын

Thanks a lot. Please don't forget to subscribe.

@mrkewi1 10 ай бұрын

nice. thanks

@Delali 10 ай бұрын

Thank you and welcome. Please don't forget to subscribe! Cheers!!

@umairarshad8541 3 жыл бұрын

Easyeda is a great software. Strongly recomended.

@Delali 3 жыл бұрын

Indeed it is. Really appreciate the support brother. Keep up the great work

@NikolayAntipov 3 жыл бұрын

Thanks for the video. That perfectly fits to my level in this area. Looking forward to watching more content on your channel.

@Delali 3 жыл бұрын

Glad it was helpful! I will do my best to keep more coming. Happy new year fam. Please dont forget to subscribe.

@NikolayAntipov 3 жыл бұрын

@@Delali Thanks! Happy New Year too!!! Yes, already subscribed :-). Keep doing great stuff!!! All the best and stay healthy!

@Delali 3 жыл бұрын

@@NikolayAntipov Awesome. Thanks fam. Take care

@paulrobinson5490 3 жыл бұрын

Very nice tutorial and nicely explained, enjoyed watching this and learned some useful stuff. Thanks for your time on this, stay well :)

@Delali 3 жыл бұрын

Glad this video was helpful. Thanks for taking the time to watch. You rock :-)

@3cm648 3 жыл бұрын

So clear tutorial. Learned from this video. Thank so much and keep it up ! Cheers bro.

@Delali 3 жыл бұрын

Happy to hear that! Thank you. Please dont forget to subscribe.

@Delali 3 жыл бұрын

@@3cm648 thanks. i would check your channel out.

@3cm648 3 жыл бұрын

@@Delali thans Delali

@balajibg1537 2 жыл бұрын

Very nice tutorial, able to quickly learn how to create pcb. Thanks a lot for explaining clearly.

@Delali 2 жыл бұрын

Glad it was helpful! I appreciate your comment. Please dont forget to like and subscribe. Cheers!!

@malinirobby2916 4 жыл бұрын

Nicely explained

@Delali 4 жыл бұрын

Thank you so much 🙂

@yossepbinyoum2181 10 ай бұрын

As a beginner thank you i learn a lot

@Delali 10 ай бұрын

You’re welcome 😊 I'm glad you found this video helpful.

@Bhalufixer 4 ай бұрын

Thanks

@Delali 4 ай бұрын

You're welcome. Please don't forget to subscribe. Cheers!!

@robertbigott9742 Жыл бұрын

Great job. I have a 20 yr old BSEET degree and with out a doubt your presentation was one of the most technically accurate, and effectIive presentations that I have come across. Keep up thr fantastic work. I am now a new subscriber.

@Delali Жыл бұрын

Wow, thanks! Thanks so much for your kind words. I really appreciate you taking the time to leave this feedback. Here's my Instagram handle @nerdbishop. I would love to be friends. cheers!!

@ABrokenLink 3 жыл бұрын

Excellently explained. Would love a follow up on the pcb

@Delali 3 жыл бұрын

Glad you like it. PCB video is still in the works. Kindly Subscribe to stay in touch.

@mahlonkarpaiya252 Жыл бұрын

Trying my hardest to learn how to make pcbs. Everything is easy when you know how. Your vid helped me the most so far. Well explain

@Delali Жыл бұрын

Glad I could help! Thanks so much for leaving feedback. Much appreciated. Please dont forget to subscribe. Cheers!!

@rich2956 3 жыл бұрын

Nice introduction.

@Delali 3 жыл бұрын

Thanks fam. Hope this video was of help!!! Cheers!

@willyhm6258 2 жыл бұрын

than you

@Delali 2 жыл бұрын

You're welcome fam. Please dont forget to subscribe. Cheers!!

@edwardagyekumhene3410 4 жыл бұрын

nice video bro . would like to learn more. of it.

@Delali 4 жыл бұрын

Thanks bro. Stay in touch for part 2 and 3

@joejones3201 2 жыл бұрын

I was window shopping and I passed through this and I watched it and watched until I start to feel like an engineer...You r Jesus I was blind now I can see...thanks a lot...Im from Zim in Uk

@Delali 2 жыл бұрын

Thanks so much for watching and also for the comment. Hello Joe, nice to meet you. I'm from Ghana.

@mahlonkarpaiya252 Жыл бұрын

Thank you in the name of JAH

@Delali Жыл бұрын

You are welcome mi breda. Thanks for watching.

@try-app 2 жыл бұрын

Very Nice 👍

@Delali 2 жыл бұрын

Thanks fam.

@Delali 2 жыл бұрын

Please dont forget to subscribe. Cheers!!

@shehzadshaikh2427 3 жыл бұрын

brother it was a very nice and exicting vedio may Allah bless you thank you so much

@Delali 3 жыл бұрын

So nice of you. Thanks for the kind words. Please dont forget to subscribe. Cheers!!

@eddyboh2723 4 ай бұрын

Nice video! One question how do you add more layers to your PCB?

@pecilijevelicanstveni4973 2 жыл бұрын

Thank you for this lessons! One small tip: when there are unused pins or something similar that do not need to be connected, just put the "NC - not connected" mark. That is sign "X" from the "Wiring Tools" toolbar and there will not be such warning.

@Delali 2 жыл бұрын

Thanks so much for the tip. I really appreciate it. I'd do well to add that in my next pcb tutorials. Merry Christmas and happy new year fam.

@pecilijevelicanstveni4973 2 жыл бұрын

@@Delali 👍👍👍

@Bawamaur 3 жыл бұрын

Very nice bro

@Delali 3 жыл бұрын

Thank you. Please don't forget to subscribe.

@gabrielpinedo3120 2 жыл бұрын

Your video help me a lot to understand how to use vias, thanks a lot for share information with us :-)

@Delali 2 жыл бұрын

Glad it was helpful! I appreciate you taking the time to leave this comment🌹 Please don't forget to subscribe. Cheers!!

@naderhumood1199 2 жыл бұрын

Great vedio Sir....deligintly and aptily very informative.....thanks v much. I'm sending you a suloute from Kingdom of Bahrain 🇧🇭

@Delali 2 жыл бұрын

Thanks for the kind words. Much appreciated fam. I salute back from Ghana.

@adammm142 2 жыл бұрын

Great tutorial! One of the best ones i have seen! Don't you have to make connections between ground pins/pads and the ground plane? Will the pads be connected automatically to the Copper area? I am currently working on my first PCB, which is going to be for a guitar compressor pedal.

@Delali 2 жыл бұрын

I connected the ground pins and pads together using a ground net. Kindly see 25:48 of the video for reference.

@moinshaikh6684 3 жыл бұрын

I got the tutorial for I which i was looking... Very nice & helpful tutorials. Sir please keep it up.

@Delali 3 жыл бұрын

Thank you very much Moin Shaikh, Glad i could be of help.

@Delali 3 жыл бұрын

Please dont forget to subscribe to stay in touch. cheers!!

@vinothn4228 3 жыл бұрын

Greate experience with u sir 👍

@Delali 3 жыл бұрын

My pleasure. Glad you liked it. Merry Christmas and a happy new year to you. Please dont forget to subscribe!!

@vinothn4228 3 жыл бұрын

@@Delali sir ! Plz tell me ,where u go to purchase all that components 🙄

@Delali 3 жыл бұрын

@@vinothn4228 lcsc.com mostly and also aliexpress if lcsc dont have them. I will be making a video about that soon.

@firecontrollab4342 3 жыл бұрын

very nice video and I learned more stuff Thanks

@Delali 3 жыл бұрын

Glad it was helpful!

@chrispotts2010 4 жыл бұрын

Good video, nice and easy delivery. I think you might want to leave a bigger space between high-voltage and low-voyage tracks in any future designs, for anti-tracking and safety. I enjoyed watching this, we'll done and thanks.

@Delali 4 жыл бұрын

Thanks for the tips Chris Potts, really appreciate your efforts. Will consider them in my future designs as you advised.

@johndee7603 3 жыл бұрын

Excellent presentation and very well explained. First time seeing your video and look forward to seeing what else you have done. Hopefully JLCPCB will ship to where I am..

@Delali 3 жыл бұрын

Thanks for the kind words fam. I appreciate you taking the time to leave this comment, it keeps me going. I believe JLCPCB ships everywhere. By the way where are you from? I'm from Ghana.

@johndee7603 3 жыл бұрын

@@Delali I am in Samoa, pacific islands.

@Delali 3 жыл бұрын

Wow. That's about north east of Australia right? I bet your PCB will get to you without a hitch. Have you received any packages in the past?