How to design parametric skin in revit massing

No video

How to design parametric skin in revit massing

Рет қаралды 77,563

2 жыл бұрын

Easy technique to design your parametric facade in a few simple steps using revit massing and adaptive family .
.
.
Download files from here :
t.me/SKETCHWAY/11
project name:
Dear Jingumae Building
link:
www.archdaily.com/547713/dear...
| Facebook |
/ sketchway
| Instagram |
/ sketchway_studio
|Telegram |
www.t.me/SKETCHWAY

Пікірлер: 69

@innovbrain 15 күн бұрын

Thank you very much finally someone who explained this in few steps rather than 100

@_zawi9_ 11 күн бұрын

You are a genius, thank you for your knowledge, everything explained works!

@user-rh3vf7jz4t 11 күн бұрын

can you help me please, it doesn't work on my revit 2021

@Lina-cf4oy 2 жыл бұрын

Such a clear explanation! Thank you

@sketchway1320 2 жыл бұрын

Most welcome ❤️❤️❤️

@andrescordero5009 3 ай бұрын

Great video! very helpfull for my 3D model!!

@moneebbadran1218 2 жыл бұрын

Nice work keep it going ❤🌹

@sketchway1320 2 жыл бұрын

❤❤❤

@faresahmedkadi3192 2 жыл бұрын

Great work ❤❤

@sketchway1320 2 жыл бұрын

Thanks ✌️

@coderrza117 2 жыл бұрын

I hope you will continue to train creative architecture, practical application step by step👍✔ And upload all what need tutorials ✔💙 #for_support_u

@sketchway1320 2 жыл бұрын

Thx our friend for your support... ❤️ Of course we'll do ✌️✌️

@haroldalas1048 Жыл бұрын

greatnesss

@bisak9692 Ай бұрын

very good! Thank you

@user-jj1zd6sm9u 11 ай бұрын

is it possible to make them run on the diagonal between the nodes?

@santtamaria9066 21 күн бұрын

Thank u alot ❤❤its very useful

@rashidsawant 10 ай бұрын

how to make back support angle for this facade....pls

@dzangel513 Жыл бұрын

Great work great 👍🏻. i have a question, Can we achieve the same results with placing curtain walls on mass face.

@sketchway1320 Жыл бұрын

No, We can't . Cause the Mullions will not be smooth like this .

@dungtran-dl2gx 22 күн бұрын

Thank you for your wonderful video. By the way, do you know any way to calculate the surface area of a massing in Revit?

@josephkuel3425 6 ай бұрын

The skin is not attached to the building. What is holding it up there? It's very important tutorial. Thank you!

@user-lx5ny9zy4w 9 ай бұрын

when I am trying to create form when making the parametric dots, it says it cant? i don't know why

@osamaabdelmohsen2262 Жыл бұрын

Thank you for your great effort, but I've tried to make rectangular profile but it does not work, I made it with parameters and without, it does not work in both conditions .. do you know how can I fix this?

@sketchway1320 Жыл бұрын

Most welcome @osamaabdelmohsen2262 Did you try it in circular method ? make sure that this method work with you , after that try it with rectangular profile

@congtantran721 6 ай бұрын

@@sketchway1320 with rectangular profile it does not work entire rows but only some

@gavinbarnes6310 6 ай бұрын

Ive followed exactly frame by frame multiple times but no ‘reference line’ comes up on the filter????

@ZIYAD_03 2 жыл бұрын

Is it possible to make it in vertical with the same way you done this one?

@sketchway1320 2 жыл бұрын

Yeah, You can use the same way ✌

@28103007 11 ай бұрын

need more

@user-ls3oe7wo1g Жыл бұрын

ive finished the object but theres this kind of glass that sticks to it. How do i get rid of that? thanks

@sketchway1320 Жыл бұрын

You can add material parameter for the object from family file ,after that you could fix it from project file and change it to what ever you want it

@km1666 Ай бұрын

I have been trying, my family is not attachibg with the points of mass, the last step

@routips3475 Жыл бұрын

When i put the family it doesn't walk with the curve

@sketchway1320 Жыл бұрын

You need to make sure that family is modeled correctly

@nfknisa Жыл бұрын

Thanks for the tutorial. But I can't get the reference line when I select all of them. Then, where can I find it? It's only Lines: Model Lines. Thanks in advance

@sketchway1320 Жыл бұрын

Most welcome dear, After u select the points and turn it to adaptive ,You should select all of them and click on spline from draw list ,and when u upload it to the project u will find it in component

@nfknisa Жыл бұрын

@@sketchway1320 thank you sm🙏🏻 i'll try it later

@sketchway1320 Жыл бұрын

Thanx dear, Check our telegram channel to download all needed files for this tutorial . t.me/SKETCHWAY

@user-rh3vf7jz4t 11 күн бұрын

it doesn't work, please help. I work on revit 2021

@mahtarezaei8152 2 жыл бұрын

Hi Thanks so much, but my pattern won't bend around the mesh, and I checked it's the Generic Model Adaptive Template .

@sketchway1320 2 жыл бұрын

Most welcom dear , while you creating the adaptive family make sure that lines are reference lines . Also, try the family if it's working before loaded into project by move one of the adaptive point . let us know if the problem solved :) ..

@EZain 6 ай бұрын

It is Not working before loading in project aswell, and I have even used the family template provided by you :( @@sketchway1320

@atj889 Жыл бұрын

How can you change the material of the curves?

@sketchway1320 Жыл бұрын

From family file select shape from properties click on material , to edit material in family file click on 3 point button or by clicking on parameter button you could make it parameter to change it from project file .

@justiceegwabor3218 7 ай бұрын

Great tutorial, and clear instructions, but mine in isnt working, it loading into my project as a Dot. Like a point placement. Its very frustrating, im following all of your clicks as it is.

@sketchway1320 6 ай бұрын

Make sure of the units and scale in family file and project file .

@jijosam3226 9 ай бұрын

I can't join the family with nodes...means it dosen't turns it places daigonally

@sketchway1320 8 ай бұрын

Make sure that you use the right family template you could download it from our Telegram channel. The link in video Description

@EZain 6 ай бұрын

I am not getting the option of Reference lines at 08:06 instead I am getting only Lines (Generic Model) option. How to fix it ? :(

@sketchway1320 6 ай бұрын

Convert the lines to Reference lines from properties then continue

@routips3475 Жыл бұрын

Why it doesn't work with me

@sketchway1320 Жыл бұрын

Could you define the problem?

@second8060 9 ай бұрын

when I do the repeat part it doesn't work, any ideas how to work it ?

@sketchway1320 8 ай бұрын

You can download the family from Telegram channel the link in the video description. You could use it if you didnt success in creating it and you could make sure that it works well... ❤️

@tahanehussean5781 6 ай бұрын

الاطار ما رضي يلف معي

@rayyanjaffer4039 8 ай бұрын

I did every steps correctly but the family in not bending acoording to nodes... please tell me what to do

@Hasty_Bahadin 2 ай бұрын

watch another video this one isn't helpful

@bachnguyen928 Ай бұрын

I also had the same problem. It was because when making the circular profile I chose model line instead of reference line. Try doing that

@Hasty_Bahadin Ай бұрын

honestly, for me, I created multiple reference lines on different levels then on each level I created model line of SPL line with nodes. Afterwards, I selected all the model lines which was created, then created the form. then I had a family created of only six adaptive nodes. I placed the six adaptive notes on the SPL line nodes then I clicked on repeat and it built my entire form.

@Hasty_Bahadin Ай бұрын

watch Adaptive Profile in Revit 2019 ( Extra Tutorial by Niko G. on youtube. his method worked for me