Finally got it up and running. The only delays we had was because we realized we needed some extra parts (I’ll list that below) kzfaq.infoUgkxihMYiJNXcHdbH-7ihymsLz61l7jVyb5O . So we have a loft where our current hvac just couldn’t seem to keep cool during the summer. We have been using a window unit since we bought this house over 6 years ago (all the houses in this neighborhood were built in the 80’s and majority of the houses built like ours use a window unit). I hate window units because they are just so noisy and the one we had really only cools one side of the loft. I had contemplated upgrading our current HVAC, but with all the rising prices these days, it would take years before saving up enough to do that. With the advice of my father-in-law (used to run an HVAC business), he recommended we get an inverter instead. We thought we bought everything we needed, but there were just a few other parts we didn’t anticipate needing (which is what caused most of our delay). My friend and father-in-law did all the work to get it installed and running and now we have nice cool air circulating nicely throughout the entire loft. It is very quiet and even the outside unit is much quieter than our main HVAC unit. Saved ourselves thousands getting this.

Unga video ynaku romba payanula oru video sir thank you sir ❤❤🎉👌😍😍

Thank you for a very clear and concise video

Wonderful job of explaining the steps with gestures!!!! Thank you for the video! Internet needs more of you!

Air conditioner cleaning I vote we demand Air conditioner manufactures design the equipment they sell to be more user-friendly and serviceable. Clearly all the split type air conditioners you see today are not designed for easy cleaning or easy maintenance. These systems need to be cleaned and maintain on a regular basis. How long do you think those metal screws into plastic housings housing will last before you see failure. Then what, where will you buy replacement parts? Come on Daikin, make your products the best they can be!

Hi, is there any ways to remove the blower without detaching the whole casing? The design is damn stupid from Daikin. Very difficult to remove blower

finally the teardown for my model. thanks a million

Wow, First video of this A/C! Congratulations

Appreciable.. I was looking for such video for my aircon.

you deserve more views great content...thumbs up to you

what a terrible design. the daikin factory should know that blower fan coil needs to be cleaned regularly and thoroughly. spraying jet washer just isn't enough, it needs to come off. very good step by step video nonetheless.

I miss this daikin design.

Wow the most definitive guide on youtube. Great video

cheers, I have an older model but I'm sure it's 90% similar!

any way to remove the blower without dismantling the whole cooling coil?

Appreciate the video. Helped me open up my wall unit. Thanks

That's freaking awesome man but can you tell me where is the so-called drip tray where the condense water it's collected and then and drained away? it's extremely hard to recognize, which part is that? 8:20 is that the condensation water pipe? and how do you open the tray to thoroughly wash it out? thank you!

Pancen oyeee.... 👍

super merci beaucoup

Thanks for this video. I have this model at home, and I'm trying to figure out why the air is not blowing strong.

The king of professional .

What is the cable connection to the coils for? Mine seems rusty already.

很有用，支持

Dear Sirs, thank you for your video. I own a Daikin FTXS25K2V1B that it is a pretty similar machine but it seems that the water collector tray is not detachable like you show in this video. For this reason it is not easy for me to get the machine completely clean because the component itself is an integral part of the main plastic body. Do you have any suggestion on how to perform a proper maintenance routine on this type of machine despite the fact that the collector tray is not easily accessible? Thank you very much for your reply!

Thank you! thank you! thank you! thank you! thank you! thank you!

Thank you

Thanks 👍

Hi Sir, do u so Major Aircon servicing foe this model?

Great work and very useful! I have the same model. Thanks for sharing.

Great presentation. I have a problem with little noise during the running and awfull smell, like dead corps. Can be that because of some contact between the rotating fan and some rigid parts inside. Does anyone have such experience?

Hi...mine is similar but i cant pull out the fan motor..it like stuck..do i need to pull with some force?thx

Excellent

Thanks for sharing this video

Nice video 👍

Thanks for sharing

Supar

感谢

There is a small metal clip on the blower wheel. I forgot to install it back after cleaning. is it important? what does it do?

So to remove it of the wall i have to do all this???? Please tell me thats not true

the fact the blower is the 'last boss' says much about the company's ethics, or the lack of it.

My daikin ftk25tv1w 2.5HP indoor unit I try pull blower out to left so strong after unscrew its fan motor connector screw still don't come out, know how?

mon unité intérieur de climatisation Samsung fait du bruit est ce que le problème émane du ventilateur interne du split ou des roulements du moteur ? et si le problème émane du moteur est ce que je remplace le moteur ou je remplace les roulements du moteur?

Thanks for sharing this video master

Thanks, this is the same type in my home

Air conditioner is heavy or no?

Hi bro, mine the same model but there is excessive condensation, tried chemical overhaul - no use. U got any aircon guy to intro?

Does a Daikin aircon usually lasts for 15, 14, 13 or 12 years of usage before being eventually replaced by a new one?

Hi I have a question, are these series Daikin still producing.

Good job 👍🏻

The part air comes out is broken where can I buy?

Pls do for FTKS50

I am getting C3 error code in Daikin inverter split AC 1.5 ton. how can we solve it please tell me about C3 error code

can you explain for ftc50nv14 model.

Didn’t show how to remove the roller

make video daikin ftc 20 nv please bro like same this video

you should have at least show to us the steps on how to assemble it back rather than fast forwarding it without any information