How to do a Dawn Power Wash Tumbler-Epoxy free using Crystalac
Рет қаралды 4,778
3 жыл бұрын1. Prep cup by sanding w 60- 80 grit sandpaper and wash. Then wipe with rubbing alcohol
2. Spray base color and let dry
3. Spray with Dawn PowerWash and then immediately with your next color
4. Dunk in water to wash off
5. Let dry and gas off 48 hours
6. Apply thin coat Brite Tone and let dry 4 hours
7. Do that again
8. Apply decal
9. Apply BT and let dry 4 hours
10. Do that again
11. And again
12. Let dry overnight
13. Sand with 220-320 grit paying attention to the decal area, then rinse and dry
14. Hit it with another coat of BT and let dry 4 hours
15. Do that like 3-4 more times
16. Let cure at least 5 days.
17. Be gentle with it for next 30 days.
@MsHunniLove 3 жыл бұрын
I love how this came out! Very cute.
@carolinerennie3236 3 жыл бұрын
I really love the idea of that but why do you put your resent with your fingers and no gloves
@kristinbanks5159 3 жыл бұрын
It's not resin it's Crystalac and water based non toxic top coat.
@blueberryfrog894 3 жыл бұрын
What she said ☝️
@juilaaraujo9936 3 жыл бұрын
Can this be done on a acrylic tumbler?
@blueberryfrog894 3 жыл бұрын
I don’t know? Not sure if the paint would stick to acrylic
@michellemossbrooks8839 3 жыл бұрын
Which CrystaLac did you use?
@blueberryfrog894 3 жыл бұрын
Brite Tone Gloss
@joanobrien4373 3 жыл бұрын
U are out of focus
@blueberryfrog894 3 жыл бұрын
And out of frame! Guess I need more practice
Sergio Outdoors
Рет қаралды 85 МЛН
Cool Items Official
Рет қаралды 58 МЛН
The Tim Dillon Show
Рет қаралды 3,3 МЛН
Mr. Crafty Pants
Рет қаралды 1,2 МЛН