How to do a Fox 36 Performance lower leg service
Рет қаралды 22,957
Күн бұрынIn this video I’m going to give you a step-by-step process on how to properly perform a Fox 36 Performance lower leg service.
TIMESTAMPS
0:00 Introduction
0:41 Cleaning the fork
1:39 Removing rebound adjuster
2:01 Removing bottom nuts and crush washers
2:32 Removing damper and air spring
3:08 Removing and cleaning the lower legs, damper and air spring
3:35 Replacing foam rings, seals, and sag ring
4:41 Reinstalling damper and air spring
5:26 Inserting oil into lower legs
6:09 Tightening bottom nuts
LINKS
Website: mountainbikeservice.com/
Facebook Group: / mountainbikeservice
Repair specifications: mountainbikeservice.com/lower...
OUR SHOP
Address: Bedrijfsweg 6a, 2421 LE, Nieuwkoop, the Netherlands
Phone: 0172 608 351
OPENING HOURS
Monday: 08:00 - 18:00
Wednesday: 19:00 - 21:00
Friday: 08:00 - 18:00
@vuss2107 2 жыл бұрын
Great video Awesome workstands Correct tool makes life much easier 👍
@hokiedokie Жыл бұрын
Thanks so much... these forks are great for what they are.
@edarnold99017 2 жыл бұрын
Nice instruction
@simonchaddock3694 2 жыл бұрын
Can you do one with fit4 damper cheers
@_BlueHorseshoe_ 9 ай бұрын
My son just did this service but forgot to put the grease on the inside of the seal. Is is possible to wipe some on the stanchion and work it back and forth to get sufficient grease in there without redoing the entire service? Thanks.
@mountainbikeservice155 9 ай бұрын
No, a seal is meant to keep things out. If what you say could work, then a couple of wet rides and your fork would be filled with water and grime.
@macvette1 2 жыл бұрын
Never work on the fork before releasing the pressure on the top!!!
@mtbmj7816 2 жыл бұрын
This step should be added.
@mtnmnkymilitia Жыл бұрын
Blahahaaaaa🤣
GMBN Tech
Рет қаралды 223 М.
kochevnik.com.ua
Рет қаралды 1,7 М.
Pedaling Dave
Рет қаралды 16 М.
EMTB ChrisWeezy
Рет қаралды 7 М.