HOW TO DO A YEARLY MAINTENANCE ON A CERAMIC COATED CAR: CERAMIC COATING MAINTENANCE TIPS AND TRICKS

  Рет қаралды 23,377

AUTO DETAILING PODCAST

AUTO DETAILING PODCAST

4 жыл бұрын

HOW TO DO A YEARLY MAINTENANCE ON A CERAMIC COATED CAR
PICK UP THE JIMBO HAT: jimbodaily.com/products/jimbo...
SUBSCRIBE TO MY CHANNEL: kzfaq.info?...
CONNECT WITH JIMBO:
PODCAST STORE: www.JimboDaily.com
PODCAST: www.AutoDetailingPodcast.com
FACEBOOK: / autodetailingpodcast or / jimbo.balaam
INSTAGRAM: / theautodetailingpodcast or / jimbobalaam
PO BOX:
Auto Detailing Podcast
1077 E. Pacific Coast HWY
Seal Beach, CA 90740
#CheapVsExpensiveCarCare #AutoDetailing #AutoDetailingPodcast

Пікірлер: 100
@ashishjadhav8794
@ashishjadhav8794 4 жыл бұрын
Hi, onequestion here, if we use clay bar or clay pad (machine) over a ceramic coating, does this harm ceramic coating layers. And which is the best method clay bar or clay pad machine?
@abdullah_fardm.9725
@abdullah_fardm.9725 4 жыл бұрын
I like the new style of your KZfaq videos.
@abdullah_fardm.9725
@abdullah_fardm.9725 4 жыл бұрын
Paused at 5:58 I only rinse mitts, finger mitts, and brushes with my pressure washer, and I always hold them and spray them at the best comfortable angles so that there is marginal or no backfire.
@brettiansmith1758
@brettiansmith1758 4 жыл бұрын
Great video bud, appreciate the advice 👍🏻
@iqraqkamalrudin8135
@iqraqkamalrudin8135 4 жыл бұрын
Great full detail video! Good job.
@sebastian-daquanglocknerjr1883
@sebastian-daquanglocknerjr1883 3 жыл бұрын
Doing my maintenance on my 18 Gti right now, watching this
@autodetailingpodcast
@autodetailingpodcast 3 жыл бұрын
Rad!
@richardseem7948
@richardseem7948 4 жыл бұрын
great video again buddy. great tips...
@millefune
@millefune 4 жыл бұрын
Taking a pressure washer less than a yard away to it will work wonders on visibly improving any dirty car, ceramic coated or not.
@autodetailingpodcast
@autodetailingpodcast 4 жыл бұрын
actually not always, but usually
@kevinkoppes1068
@kevinkoppes1068 4 жыл бұрын
Nice Job! Gotta love Ceramic Coatings!
@CanadianGearhead
@CanadianGearhead 4 жыл бұрын
Great video Jimbo. Getting a bit wild with the transitions and b-roll - I like it :)
@autodetailingpodcast
@autodetailingpodcast 4 жыл бұрын
thanks man!
@sushishark6593
@sushishark6593 4 жыл бұрын
Great video editing! Production quality is really good, better than most vehicle detailer KZfaqrs. I especially like that scene at 3:32. Anyways, a very informative video!
@ky1le750
@ky1le750 4 жыл бұрын
Dang those red fifteen52s look fresh asf
@abdullah_fardm.9725
@abdullah_fardm.9725 4 жыл бұрын
(Paused at 4:41 Balaam technically it's the one bucket method.)
@moealbalushi3792
@moealbalushi3792 4 жыл бұрын
agree
@rdspam
@rdspam 3 жыл бұрын
Yes. I wondered how he wasn’t going to use any bucket at all.
@antonyv8171
@antonyv8171 4 жыл бұрын
Surprised you didn’t use iron remover after 1 year? Honestly this type of wash is my bog standard wash every 2-3 weeks? I apply Gyeon Cure as a silica spray sealant for my Gyeon Pure ceramic coating. I especially ensure to apply Cure to the rear of my Golf R as the hatch gets hit with the exhaust fumes... rather let the fumes eat away at Cure instead of the actual ceramic coating.
@primozlesnjak9231
@primozlesnjak9231 4 жыл бұрын
I'm doing a yearly maintenance this friday on a white VW GOLF GTI 2018 that i coated last year when he bought it. 😁
@aimhii
@aimhii 4 жыл бұрын
Dont clay bar it!!
@primozlesnjak9231
@primozlesnjak9231 4 жыл бұрын
@@aimhii i know that 🤣🤪 Doing this for 13 years love. I just said i am doing work on a practicly same car when this video came out. 🤦‍♂️ I don't know why he clayed it. 🤦‍♂️
@charlesbardforth6738
@charlesbardforth6738 4 жыл бұрын
My 0 bucket is a spray bottle 1:10'of my car wash and I hose the mitt down, than spray the solution onto the mitt and repeat
@JacobKossman
@JacobKossman 4 жыл бұрын
Yooo these shots came out great! Makes me wish you aired it out haha
@autodetailingpodcast
@autodetailingpodcast 4 жыл бұрын
Haha I should have had you do it.
@phil9171
@phil9171 4 жыл бұрын
What type of rolling seat stool are you using?
@MrWright7672
@MrWright7672 4 жыл бұрын
What kind of hose nozzle are you using? @autodetailingpodcast
@omarramirez2335
@omarramirez2335 4 жыл бұрын
What are you using for a tire cleaner
@winerolecram2856
@winerolecram2856 3 жыл бұрын
what maintance spray did you use?
@sixsixST2
@sixsixST2 4 жыл бұрын
Why no iron remover on the paint?
@Shusein
@Shusein 3 жыл бұрын
Definitely should be done. And it doesn’t degrade the ceramic coating in any way
@craigappleby6194
@craigappleby6194 4 жыл бұрын
Can you clay bar any ceramic coating with a mild clay without risking it lifting the coating? Great videos aswell 👍
@guenterhaines8898
@guenterhaines8898 4 жыл бұрын
It’s not logical to me to use clay. Chemical Devon makes more sense bc it doesn’t introduce small scratching like clay does. His zero bucket method is suboptimal as well. Not getting it.
@ddub9110
@ddub9110 4 жыл бұрын
What tire cleaner you using?
@understatedautobody
@understatedautobody 4 жыл бұрын
Something like Tar X followed by an iron remover would have had the paint silky smooth without having to clay.
@nycking025
@nycking025 2 жыл бұрын
What type of pressure washer are you using
@ctetuning
@ctetuning 4 жыл бұрын
Is it Necessary for me to do a yearly maintance wash with my ceramic coated car? I only drive about 35 miles a month car is in a garage stall. I always do touchless washes with special car shampoos
@tonymattisson6158
@tonymattisson6158 4 жыл бұрын
Is it recommended to clay the Ceramic Pro coatings by them or is it more generally that you can clay all ceramic coatings? And did you say to use a medium grade clay bar? Is there no benefit to do a chemical decon step with a tar remover and iron remover? What foam and car soap did you use? Have you tried Carpro Reset car soap and use a mf wash mitt/pad to get a better cleaning ability from it? And maybe a dedicated prewash foam if you don't used that? Seems like the difference to an ordinary wash would be to clay it. To be doing the yearly decon wash of a ceramic coating. And the use of a topper after it. What's the longevity claim on the Ceramic Pro Sport?
@adrianlawrence7224
@adrianlawrence7224 4 жыл бұрын
Great channel, Jimbo. We have a spray wax here in the UK and I'd love to see you test it out . It's called Shinne Was by TAC Systems.
@autodetailingpodcast
@autodetailingpodcast 4 жыл бұрын
I’d love to try it
@henriksjolund8162
@henriksjolund8162 4 жыл бұрын
Tac Systems Moonlight 💪
@detailsbydavidllc8770
@detailsbydavidllc8770 4 жыл бұрын
apex detail just reviewed it
@dsvillalva
@dsvillalva 3 жыл бұрын
Where did you get the white colored wash mitt? I like the white color, you can easily see the dirt much easier.
@tafl-9198
@tafl-9198 Жыл бұрын
I would like to know this as well.
@henryfreeman6113
@henryfreeman6113 4 жыл бұрын
What tire cleaner is that and what wheel cleaners do you use? Also where can I get that brush?
@henryfreeman6113
@henryfreeman6113 4 жыл бұрын
Thank you!!
@riceburner4747
@riceburner4747 3 жыл бұрын
Great work! Looks great! One thing, dont u wear gloves to protect YOU ftom chemicals?
@autodetailingpodcast
@autodetailingpodcast 3 жыл бұрын
True. I usually try to
@ademtemel6897
@ademtemel6897 4 жыл бұрын
I would have thought iron fall out removal or water spot removal products would have been used on yearly maintenance wash for coatings
@wilsontam2399
@wilsontam2399 4 жыл бұрын
I thought claying was a no no on ceramic coatings?
@everybitfitmesaazpersonalf4021
@everybitfitmesaazpersonalf4021 4 жыл бұрын
Wilson Tam. Good point !Exactly what many Ceramic Coating Pros, have told me/discussed.
@stimpynguyen4419
@stimpynguyen4419 4 жыл бұрын
I wAs thinking the same thing.
@NickM1013
@NickM1013 4 жыл бұрын
Welp. He did it and no one got hurt.
@mag1vl
@mag1vl 4 жыл бұрын
Hi Jimbo Australia calling :) What do you use to get those tyres so shiny?
@autodetailingpodcast
@autodetailingpodcast 4 жыл бұрын
Those have a spray tire shine called “cover all”
@mag1vl
@mag1vl 4 жыл бұрын
@@autodetailingpodcast Thanks for the reply Jimbo and now to see if it's available here..
@Jeeper1378
@Jeeper1378 4 жыл бұрын
What soap he using ?
@henriksjolund8162
@henriksjolund8162 4 жыл бұрын
You should test PolishAngel RapidWaxx and Scholl Neo.
@christianschaaf8003
@christianschaaf8003 Жыл бұрын
Polymer based sealants like these clog the pores of ceramic coatings and inhibit it’s hydrophobic properties over time. They do not boost their effectiveness, as much as it may make a old coating bead again. It is merely putting a bad aid over the problem. Non beading ceramic coatings will need a chemical decontamination wash using either, iron decon, tar remover or waterspor remover followed by a ceramic coating topper if needed. These products mentioned should only be used on vehicles without a ceramic coating applied.
@kikcodog
@kikcodog 4 жыл бұрын
"I'm joking?" Lol! I love CA cars. I love the individualism.
@jerrychircop7121
@jerrychircop7121 3 жыл бұрын
I have some high spots from a former ceramic coating streaking all over my car. When I compounded the vehicle the high spots showed up and I can’t seem to remove them with several passes with Maguires ultimate compound and CG VSS compound. I heard that P&S brake buster will remove it but may ruin the clear coat. I’m just wondering how you would approach removing those high spots or can I just simply put a ceramic coating over top of that and it will disappear?
@autodetailingpodcast
@autodetailingpodcast 3 жыл бұрын
I would have to see it. It’s very uncommon that high spots would appear after a compounding session. Brake buster will not ruin your clear coat but it’s definitely not recommended.
@jerrychircop7121
@jerrychircop7121 3 жыл бұрын
I can’t figure out how to add a picture but they won’t come out with several passes with compound, never seen or heard of this happening either, must be a hell of a good coating if compounding won’t do the trick. Would you start with wet sanding them out, compound and polish or would you try P&S first?
@patricknelson
@patricknelson 3 жыл бұрын
Where the wheels not also coated in ceramic coating? This was so well done, would have been awesome to also see some maintenance tips on the wheels too.
@autodetailingpodcast
@autodetailingpodcast 3 жыл бұрын
The wheels were not coated, just the paintwork.
@jaymoxas8681
@jaymoxas8681 4 жыл бұрын
what song do you have in the background during the montages?
@ejrod561
@ejrod561 2 жыл бұрын
Still waiting on whats the songs named lol
@williamthomastaggart5080
@williamthomastaggart5080 4 жыл бұрын
So quick question, what was the vehicle original coated with? The reason I ask, if it was Ceramic Pro H9, by clay baring surface, didn't you remove the H9?
@autodetailingpodcast
@autodetailingpodcast 4 жыл бұрын
CP. clay will not remove the coating
@williamthomastaggart5080
@williamthomastaggart5080 4 жыл бұрын
Thank you.
@stephenlouden480
@stephenlouden480 Жыл бұрын
now time to replace the wiper blades you're going to tear blast off with a 15 degree tip. you can hear how strong the pressure is. careful around wipers and bumper paint with an orange yellow tip people you never want a concentrate narrow fan at high pressure
@spencerb3429
@spencerb3429 4 жыл бұрын
My only concern with the technique is taking a clay bar to the paint since it is an abrasive and it will put some marring in the coating. Why not just iron decon the entire car as to avoid any potential of marring.
@DetailEnthusiast
@DetailEnthusiast 4 жыл бұрын
Right? I just removed an old ceramic coating from my truck and the clay did most of the work. The pad I used did the rest.
@josephgarrel5728
@josephgarrel5728 4 жыл бұрын
@@DetailEnthusiast a mild clay bar does not remove ceramic coating
@aimhii
@aimhii 4 жыл бұрын
@@josephgarrel5728 Yes it does!
@jrphoto8179
@jrphoto8179 Жыл бұрын
Yes clay bar would induce marring??? Didn’t understand that either…
@DetailEnthusiast
@DetailEnthusiast 4 жыл бұрын
Why do I have the urge to go buy everything from Adam's?😵😵😵
@dontlook8748
@dontlook8748 4 жыл бұрын
Zero bucket........🤨
@benthem5364
@benthem5364 4 жыл бұрын
Detail wax spray on top of sio2 coating sort of defeats the purpose, no?
@autodetailingpodcast
@autodetailingpodcast 4 жыл бұрын
For this coating their topper is needed yearly
@Pierriewargen
@Pierriewargen 4 жыл бұрын
Zero bucket. You keep using that word. I do not think it means what you think it means. 😆
@nick_conti
@nick_conti 4 жыл бұрын
Seal n shine vs TLC2
@ashishpatel350
@ashishpatel350 4 жыл бұрын
How long has the ceramic coating on that car been installed on? I'm assuming it's a year. Seems like it's stillBeading water.
@autodetailingpodcast
@autodetailingpodcast 4 жыл бұрын
This was its first yearly maintenance
@DK-pr9ny
@DK-pr9ny 2 жыл бұрын
I see one bucket.
@henriksjolund8162
@henriksjolund8162 4 жыл бұрын
why do the rims change color? Hollywood mistake?
@autodetailingpodcast
@autodetailingpodcast 4 жыл бұрын
They were dirty. Then they were clean
@khyoon14
@khyoon14 4 жыл бұрын
you shoot guns?
@GRH316
@GRH316 4 жыл бұрын
My thought is stuffed crust is always better in a pizza than not
@autodetailingpodcast
@autodetailingpodcast 4 жыл бұрын
Eww. Stuffed crust. Gross
@y2j1490yahoo
@y2j1490yahoo 4 жыл бұрын
@@autodetailingpodcast how can it be gross ? It's cheese , which is on every pizza .
@autodetailingpodcast
@autodetailingpodcast 4 жыл бұрын
Lukas not in the crust tho
@bangmygears
@bangmygears 4 жыл бұрын
Zero bucket? I still count one bucket if your dunking it back in lol
@gregsullivan7408
@gregsullivan7408 4 жыл бұрын
Yep - "off-by-one" error. A "zero bucket" wash, to me, would be a brush on a hose, releasing a detergent solution. Something like that.
@aimhii
@aimhii 4 жыл бұрын
Dude....You don't Clay Bar a ceramic coated car.....all you are doing is scraping the coating down! The paint was corrected before ceramic was applied....you are not going to get down to paint layer until you scrape through the ceramic layer with the clay!
@MrNacho1955
@MrNacho1955 4 жыл бұрын
Glass attracts a lot of dirt , bottom of the car has a lot of grim and rocks from the road . I wash the middle of the car , hood and back than rinse the mitt , wash the bottom and than the glass because nothing scratches glass . That’s a better way to wash a car
@voltage80x
@voltage80x 4 жыл бұрын
MrNacho1955 then once you wash the top you gotta wash the bottom of the car cause gravity.
@zubastik2992
@zubastik2992 4 жыл бұрын
Just put multiple mitts in a bucket of soap and never reuse
@egyptianluvr9223
@egyptianluvr9223 Жыл бұрын
Those are easily the ugliest wheels I’ve seen on any car ever
@chrissmith8830
@chrissmith8830 4 жыл бұрын
Um, with a power washer you can do this without a ceramic coating. Sigh*. So waste more water for rinsing the mitten instead of another bucket, alright! Ceramic coating maintenance liquid? Honestly ceramic coatings sounds like it’s for people with endless money. If I have to reapply something everytime I wash it I might as well be re waxing my car.
Can you put WAX ON A CERAMIC COATING? Ceramic Coating Tips and Tricks
9:39
IMJOSHV - Car Detailing and Reconditioning Tips
Рет қаралды 65 М.
HOW TO DO A MAINTENANCE WASH on a Ceramic Coated Car !!!
14:11
Pan The Organizer
Рет қаралды 625 М.
50 YouTubers Fight For $1,000,000
41:27
MrBeast
Рет қаралды 211 МЛН
Задержи дыхание дольше всех!
00:42
Аришнев
Рет қаралды 3,7 МЛН
How to care for your CERAMIC COATING
3:37
Chicago Auto Pros
Рет қаралды 215 М.
6 Month Update | 16 Professional Ceramic Coatings & Maintenance
23:08
Chicago Auto Pros
Рет қаралды 30 М.
Which Graphene Ceramic Protection Is Best For You?
0:50
Adam's Polishes
Рет қаралды 75 М.
How to clean, decontaminate & RESTORE your ceramic coating
23:50
How To Care For and Maintain A Ceramic Coating
6:57
Chicago Auto Pros
Рет қаралды 275 М.
Ceramic Coating Care Part 1 - First week after coating
7:34
Visual Pro Detailing
Рет қаралды 98 М.
Why You Shouldn't Get A Ceramic Coating
7:53
Chicago Auto Pros
Рет қаралды 2,7 МЛН
Top 5 Paint Polishing Mistakes to Avoid! ATA 203
25:01
AMMO NYC
Рет қаралды 894 М.
How To Tell When A Car Needs A Wax.
1:30
Torque Steer
Рет қаралды 15 М.
#vtx1800 #колесо #дтп  сложный ремонт диска
1:00
Глобус Мото
Рет қаралды 2 МЛН
Exhaust Tips GLE 63s
0:19
Straight Piped by: Gexhaust
Рет қаралды 2,9 МЛН
ВЫХЛОП КАК У АХМЕДА WENGALLBI
0:59
Мистер Глушитель
Рет қаралды 625 М.
БМВ М4 сожгли дети. Вся правда. Будем восстанавливать!
45:37
Мастерская Синдиката
Рет қаралды 1,9 МЛН
ЗАКЛИНИЛО ГАЗ 🤯
0:16
Top YouTubs
Рет қаралды 552 М.