🔥 PLADUR wall 👉 How to Assemble TRASDOSADO with GYPFOR LAMINATED PLASTER ✅ • 🔥 Pared de PLADUR 👉 Có...
🔵 Page 👉 www.banggood.com/custlink/KDG...
👉 Screwdriver Drill ▶︎ www.banggood.com/es/TOPSHAK-T... 1pc-Battery-EU-or-US-Plug-and-43pcs-Accessories-p-1927188.html?
👉 Saw ▶︎ ban.ggood.vip/11gd1
🟢 Drill 👉 www.banggood.com/custlink/3Km...
What are transfers?
A lining is the coating of any type of wall that may exist in a home, whether interior or facade. The 3 most common types used in housing construction are: direct lining, semi-direct lining and self-supporting lining.
1. Direct plastering These are thin and flexible plasterboards that with touches of adhesive paste are applied directly on rigid and thick walls. The paste allows the plates to be fixed and leveled while respecting an air chamber. In addition, they allow the incorporation of any thermal or acoustic insulation material on the hidden face.
2. Semi-direct claddingThis is a partition attached to an old or new wall with omega profiles, so named because of their shape. They are often used to cover up old partitions with imperfections and give them a totally new look.
3. Self-supporting claddingThe self-supporting cladding is made up of a galvanized steel metal structure that can be with channels and uprights or a U profile and 60/27 master. One or more plasterboards are screwed to this structure. Its thickness, quantity and type will depend on the required technical characteristics.
Video transcript:
Very good!
Today we go with a semi-direct trasdosado.
In this video I will test this battery-powered drill/driver that was kindly sent to me by the company Banggood (Bangud).
We will use the master omega 80.
In this case I made some cuts in the center of the omega, to be able to fold it and thus upload it in the elevator.
We check if the wall is well level and in line.
We mark to put the omegas every 40cm.
In the first measurement from the wall, we have to mark 36cm to be able to place the wing of the omega in line with the mark.
Now from the mark, we mark every 40cm.
We measure the height and cut an omega.
We drill in a wing and put a screw in it so that it stays attached.
Thank you for giving me the opportunity to try this product. In the description you can find the link, in case you want to try it, or know more about it.
Then we drill at a distance of 50cm, in both wings of the omega.
We put the plugs with screws and screw them.
We do the same with the following omegas.
What do you think of my content?
Interesting, right? If you are not subscribed, click on the button, tón tón tón tón tón tónnnn.
I leave it unscrewed simply in case I have to insert wedges, although in this case I think I won't need the wedges.
With this omega I am going to mark the line, since in this space I will use pieces of omega.
As we can see, the wall is quite good. We don't need wedges.
If necessary, it should be done like this.
We screw the omegas.
I am very grateful to Banggood for the drill driver. It works very well and is ideal to have at home.
I remind you that you can find the link in the description.
We pass the electricity pipes if necessary.
We measure to cut the plate.
To this plate I made a cut with the cutter, in the back, so that I could raise the plate in a small elevator.
We mark it and cut it.
If the wall is longer, we will put the plates in the other direction.
We put it on and screw it on
We measure to cut the other plate and place it.
Ready semi-direct trasdosado.
If you liked this video, don't forget to click LIKE and share it with your friends.
Do you want to know every time I upload a new video of crafts, tricks, decoration ideas, inventions and some other interesting and fun things? So don't forget to subscribe to my channel :-D