Watch our partners at Riggers Safety show us how to properly don and adjust a Riggers Safety fall protection harness.
WARNING: This video is intended to serve as a supplement to professional training. All harness users must complete professional fall protection training before attempting to use a harness. Instructions in this video may only be applied to Riggers Safety harnesses. Riggers Safety assumes no liability for improperly donned harnesses nor the adequacy of installations incorporating full body harnesses and connecting subsystem components (i.e. anchorage, lanyards and connectors) beyond the limitations set by the manufacturer’s instructions. All fall protection system components used in conjunction with the harness must comply with applicable OSHA or ANSI current requirements and any applicable new standards. Riggers Safety denies liability for incidents that occur due to non-compliant or incompatible components.
Serious injury or death can occur due to failure to comply with manufacturer’s instructions included with equipment at time of shipment from manufacturer. Instructions regarding application, limitations, inspection and maintenance should be read prior to applying the harness to personal fall protection system. Instructions should be available at all times for reference. Other personal fall protection components connected to this equipment must be ANSI compliant and compatible. All personal fall protection equipment must be inspected prior to each use and at least annually by a competent person. If equipment does not meet inspection criteria outlined in manual and/or if subject to fall arrest forces remove from service immediately.