I've watched you for 2yrs now. Before I started my Career. I now have 3 trucks and 5 drivers. Thank you for being a motivated mentor.

Omg I remember when I first started driving I stalled on this hill in the middle of heavy traffic, I was so shooked. He is so rite,I was letting my rpms drop to low and trying to catch a gear, once you do that you're cooked 😂. I use to be terrified when I see a hill coming but I been driving 13 years now and I have mastered it ,once you get by yourself in a truck you're gonna learn alot, i luv watching Dave videos because he has alot of knowledge on trucking .

Automatic guys are like “huh??”

I got my license in 1972. In my days no automatics. I always loved shifting gears. That was real trucking! Drive safe and merry christmas everybody.

My rule of thumb is this, double clutch going down gears, Float gears going up. Make it as easy on yourself as possible.

I do the same thing, I skip gears , sometimes from 10 to 8 or 10 to 7 depending on how stiff the hill is and how heavy I am running. Every technique comes with time , thank you David.

Great advise Dave. Even with as many years as I have sometimes I miss gears climbing a hill. My advice is don't panic, just relax, go to the next lower gear. Merry Christmas to you and your family, Dave!!! Stay safe out there.

1.Never run the rpms to low up hill 2. Keep light pressure on shifter let off throttle the transmission should go in to neutral immediately rev up engine and ease it with your fingers Should go right into gear. This might take some practice

Even at 46 I never get tired of listening to good truckin stories. Reminds me of when I was a kid hanging around the shop with my uncles and step dad. Merry Christmas!

I remember driving a 318 Detroit with a 13 speed when I was a young-un... That truck could smell a hill from a mile away and I would have to downshift 2 gears before I even hit the hill. I learned quickly about downshifting with that old Detroit and it became second nature. Nice videos and thanks for all the tips! I hope Santa made it home safely!

This guy really knows his shit! Truckers make the mistake of downshifting too late on steep hills with heavy loads all the time. They forget that window is different on a steep hill. The higher the rpm for the downshift, the better! The lower that rpm gets the faster that window closes. So many truckers are afraid to use those higher rpms, mainly due to being taught by these mega companies. You can use the rpms all the way up to 2000 rpms on the high side, but most guys are afraid to go that high. I always suggest guys who came from a mega company to unlearn all of that bullshit they were taught by the mega company. These trucks can do so much more than they think, but they have to push the truck harder. A lot of these guys truck's do not pull simply from them babying the truck. I've driven many trucks where the previous driver told me that the truck was weak, and it was upon first driving it. However, after me driving it for a few hundred miles or so, I always end up pulling that power out of that truck, just by simply using more rpms more frequently on those hills. The truck will only respond to how you drive it, and it also remembers how you drive it. The average driver stays between 1000 and 1500 rpms. I stay between 1600 and 2000 rpms depending on the situation and whether I'm loaded heavy, especially if I'm trying to get the power out of the truck. If i don't need the power, I'll stay a little lower on the rpms. It really just depends on the situation that will determine how I shift. The type of motor the truck has also matters. Knowing what you have under the hood always matters. You can have a low torque motor and be shifting it too high and then be wondering what's wrong. You can have a workhorse motor and shift it too low, and you'll still be wondering whats wrong. Know your truck and its specs at all times and don't be afraid of it! Even the weakest trucks can do a little more than you think, if you just drive it right!

Just getting my CDL permit, your tips and advice will help me once I get a job in trucking. Look forward to more videos of the many years of knowledge you have. Thank you!!!

Going from 8th to 7th I learned an excellent trick that worked well for me. You come off the throttle, blipping slightly to free the selector into neutral, back on the floor with the throttle while applying upwards pressure on the selector and it would catch clean

I've been watching your videos for about the last 6 months. I'm not a trucker, but really enjoy everything you talk about. Especially the stories. Thanks!

I agree with skipping a gear when running heavy and going up a decent grade. Worked well for me.

This man is very knowledgeable in the field of trucking. I wish he was my instructor.

I remember when I was new and still in training I stalled the truck going eastbound climbing Tehachapi in California. Not my best day.

He has Good advice, I use the 1-2 method floating gears... 1 move out of the gear 2 move it in the next gear. I use to think floating gears scared me half to death, but it is really the best way to go... Using the right rpm for the speed and torque... If you do use the clutch to double clutch your gears, remember & very important "do not push your clutch pedal all the way down" you only want to push it far enough to disengage the torque from the motor to the rest of the weight of the truck & trailer. That is one the thing my teacher trainer didn't tell me, all he said was don't push it all the way, you will hit the clutch brake...

Thanks I have an international ten wheeler with a 13 speed and had learned the skip gear works good for me. Merry Christmas

After 39 years of driving I now have the perfect solution to this problem. A new Mack with an Allison automatic. Haven’t missed a gear yet with it. 😁 Good video and great advice. I don’t miss shifting.

Super great advice Dave....as always. Using the clutch on the downsift saves alot stress on driveline! A very Merry Christmas to You and Cathy, and a very happy and prosperous New Year! Stay safe Dave!

nice to find your channel, you know your stuff and listening to your candian Accent reminds me of running upstate New York on I 81. The Canadian truckers were always the nicest drivers! Your stories also reminds me of the days when I hauled produce coast to coast loading in California back to Florida. I started over the road running for an owner operator and Produce was his main commodity. this old guy made me a much better driver because boy he was very high standards with his equipment. But I was grandfathered into the business in 1990 so all of my learning experience was on the job! It’s fun to watch your videos they are spot on !!! thanks for caring to raise the bar for the newer drivers! I now pull doubles for an union LTL company. “Wildflower”

Don’t forget the speedometer is an essential tool! Know your speeds in each gear at the high and low end. If I’m at 45 and slowing gradually I go down to 8th as 40 is the high end and 30 is the low end plenty of time to catch it. And use that clutch going uphill!

When I was just a kid my dad had an old 2-ton gasser loaded with corn going up a hill. I was too young to remember if he missed a shift or just had that big a load but we had to back down the hill and go around. It wasn't that big of a hill but my dad always figured if the sides could hold that much corn the truck must be able to handle it.

Thanks. I will be driving 18 speed soon on my new job. I have driven 18 speed before and I had exact same problem not been able to shift smoothly going up hill with heavy load. couple of time stall the truck at Golden BC hill. I will definitely try this method now. thanks for the knowledge.

So true Dave stay calm especially in the winter I like to drop 2 works great.

Great advice👍🏻 been off the stick for a few years and a little nervous jumping back on this coming week pulling 120t+ and the rout has a couple big jump ups😳😳 Thank you👍🏻😊

Awesome Video!🎥

Good video. We've all done it; blowing a downshift while climbing a steep hill. I even put it in reverse one time by mistake. I like your idea of taking two gears.

Great advice Dave been pulling logs in northern Ontario for 4 1/2 yrs and have had some hires training under me and I have alway told to have a plan before the hill and it doesn’t matter if it work out keep calm and go to your next available gear. Merry Christmas to you and family and keep the rubber to down and the shiney side side up

This advice is spot on!

Thank you so much for posting the video. I really like your videos. I'm waiting for my Hazmat to come, still looking for a trucking home to start at.

Merry Christmas to you and your family. Thank you for a wonderful year of uploads. I really enjoy your channel and appreciate all the effort you put into it. Peace on Earth, Dave.

After doing this for so many years, you can tell when to shift just by the way the engine sounds.

interesting video, makes total common sense. I don't drive trucks for a living, but the concept of skip shifting, shifting on hills etc, this is all stuff i kinda learned driving back in the UK. passing a regular auto drivers test there is more like trying to get a CDL here.

Sure wish Id had this channel when I started driving ! Good job, Dave.

Just want to say thanks for all the great info you offer.

Thanks for your help! This advice is a game changer!!

I always love your stories. You tell them well

great info, thx for your experience David...cheers!

Double down 9th to 7th! Excellent gearing going up.

Happy christmas Dave,thanks for all the vids

Thanks Dave for the advice 👍

Your videos are awesome keep it up

Thank you so much Dave. This is truly smart trucking.

Very Good Advice this is why you need to learn to double clutch. I have seen new guys not doing that.

MY Two Methods. Merry Christmas Dave and Boss, Happy New Year, too...

With you on that Dave. Skip a gear or a half. Drop 2 if too low in the RPM. Be on a ball with downshifting up the hill.

Thanks I have an international ten wheeler with a 13 speed and had learned the skip gear works good for me. I haul hay in my local area . small rig and old but it works for me. Merry CHristmas

Merry Christmas from Seattle, Dave you’ve been a big help to me this year!

As always, some very good advice. You got me to thinking when I was learning to shift a 13 speed. Some good memories. Sounds like someone had a grudge against Santa. Still mad about that toy he never brought. Anyway have a Merry Christmas Dave. Thanks.

Another great vid, thank you for this one, Happy Holidays man!

Before I learned to both listen to the truck tell me when to shift and not to panic and downshift an extra gear when necessary, nothing scarred me more than this. I was so glad my school never took me up the hills in Tacoma Washington. I would have almost certainly wrecked.

Good advice. Merry Christmas to you and your family.

Merry Christmas Dave and thanks for the tips. Any chance you can do a "how to video" on downshifting and upshifting when climbing a hill? Thanks

Merry Christmas Brother thanks for the advise Dave

Merry Christmas Dave and family.

Great explanation 😊

Wonderful! Great ideas!! 💜

Thank you for sharing ❤

A friend of mine suggested going down a gear and a half instead of doing one or two ( sometimes you're not going to drop one quickly enough but dropping two might let the revs drop too much) most of the time it works for me I regularly pull B double with steel coil up a thankfully 6% hill two or three times a day.

i have manual Volvo boxes, and they are synchronized boxes so need to use the clutch all the time. you need time for downshifting so have to shift early, but easy to skip gears. oldest truck is 12 years and have done local dump truck work all its life, half the year with a trailer. never had to to anything to the clutch, but its a heavy duty twin disc. on all the high power engines like the 750hp engine you only have the i-shift as an option. i shift dual clutch you can only get for the 540hp as max. whats great with volvo engines they have a flat torque line. pulls good from down low.

Thanks for your video sir. God bless you.

Tip #3 Shift while the RPMs are high. Don't lug the engine down to 1200 RPM and then try to shift.

Great explanation...👍

This literally saved my ass. Had no idea what i was doing until i watched this. Thanks.

Merry Christmas Dave to you and yours ☃️❄️🎁🎀🎅

that is very good advise.

I am SO glad I watched this, I’ve been shifting down on 5 rpm good god no wonder it was so hard 🙃

Happy holidays 😃😃

This is pretty helpful! Merry Christmas Dave!

Solid advice!

Very helpful thank you

Merry Christmas to you and your family

Awesome video. Thank you!!!

When I first started driver back many years ago I hauled swinging meat in a meat rail trailer. Even with a good packed load it was a hard but with a loose pack it was terrible but you learned how be smooth shifting up hill and down hill.And on corners.

Dave you and Cat have a wonderful Christmas and a Great 2019. Good video on shifting and even old technics work on this newer type equipment.

Wow, awesome. This is the realm of the Pros. Great !!

MERRY CHRISTMAS dave and cat as always thanks

You offer good advice, good channel

Merry Christmas Dave.

Merry Christmas 🎅

The frame twists under load and how fast you slack off on the throttle affects your shift timing also.

great tips and lovely story man

Thx Mr. Dave good video.👌👍👌👍

Stopping for a light, I will clutch it out of gear at about 1000 rpm and then float it in the next gear down. On an incline, I will float it out of gear at about 1250 ( depending on the grade and weight ) and float in in the next gear down. That's what works for me. 10 speed btw.

Have a blessed 2019.

I downshifted going uphill in school. Got yelled at. Thankfully I made the shift, somehow. Believe I blipped the throttle. 21 yrs ago. Up l-26 out of Spartanburg SC

I find a lot of inexperienced guys go for the down shift at higher rpm but end up over doing the rev to match the lower gear and then give up on the shift before the revs have dropped off to the point where it engages. Go at higher rpm but keep the rev to match within reason as you well explained the higher starting point will be absorbed through the loss of road speed caused by the gradient. Failing that know your Speedo readings for each gear and recover a gear that way maybe thinking two or three ratios lower than where you’re at as things change fast on a hill👍 Great video mate from a fan in Auzzie land 👌👍🍻

Merry Christmas!🎂🎄☃️⭐😇♥️

Merry Xmas , guys ! Greetings from France ☺

If the hill is steep you can't break torque by letting off the throttle to get the transmission out of gear. You have to use the clutch.

Merry Christmas and happy new year

Don’t recall having issues down shifting but I never “floated” my gears on a grade! You need to eliminate (neutralize) torque in the gear box in order to smoothly “float” to another gear and I just don’t see how you can do this effectively on a grade unless you do it long before you any significant momentum!

That's one of the beautiful things about a 13th speed is you can just split the gear which kind of solves that problem altogether

Its hard to really explain it. But you do it fairly well. Its a much quicker shift. The window is very short. However going down a high grade is a whole other issue.

It's like another driver told me many years ago if you're going up a grade and it's going to stall grab a gear any gear that keeps it going forward.

Good video

If you find a gear that is too low ( in general ) don't let the clutch out all the way

I drove a detroit freightliner, you gotta REALLY pay attention. 18-21 climbing hills and taking off. Normally I cruise at 75 in top gear (13 speed 8V71T) and at 55 I'm in 7H (11th technically). But when climbing a hill at 75 I hit 7H and for climbing a hill at 55 im usually in 6H or 6L