No video
How to Drip Feed a Subprogram From a Memory Card
Рет қаралды 4,371
Күн бұрынEver try running an engraving or surfacing program that exceeds your machine's CNC memory? Tsugami Product Manager, Derek Briggs, walks you through the two piece, PCMCIA memory card system, setting your parameters, and how to drip feeding a subprogram from a memory card so you can run large programs with ease!
@robbywilliamson8305 Жыл бұрын
Man, you just saved me. I couldn't make this machine read from the card to save my life. I followed your instructions, and it works great. Thanks again
@orthodoxNPC Жыл бұрын
this is great, thanks
@weldmachine Жыл бұрын
Shouldn't this work for most Fanuc/ ISO controllers ?? Most annoying part with Fanuc Controllers ??? Lack of Memory Space. But, at least you can install an External Memory to run fair long programs. Not sure IF it still happens with Fanuc Controllers ?? But, from my memory. You can only use a Memory Card with up to 4 GB otherwise they throw an Alarm or the Memory Card simply does not work IF you use a larger size ?? But, of course 4GB is fairly large for CNC machine. 🙂
@orthodoxNPC Жыл бұрын
wheres the p99?
Vector Mfg
Рет қаралды 1 М.
Matthew CNC Sutton
Рет қаралды 31 М.
GHK Master CNC Academy
Рет қаралды 1,2 М.