How to Easily Control Addressable LEDs with an ESP32 or ESP8266

How to Easily Control Addressable LEDs with an ESP32 or ESP8266 | WLED Project

Рет қаралды 475,080

Күн бұрын

Come Watch Part 2! - • How to make Custom Pix...
Subscribe For More!
Full Article - core-electronics.com.au/tutor...
WLED is the greatest way to add IoT connectivity to fully addressable LEDs like WS2812B strips, GlowBit Modules or NeoPixels. Filled to the brim with customisable light shows and fully open-source, it really feels like magic ✨🔮 No Coding Necessary!
Related Information
WLED App on Google Play Store - play.google.com/store/apps/de...
WLED App on IOS App Store - apps.apple.com/us/app/wled/id...
WLED Web Installer - install.wled.me
ESP32 Nomenclature Guide - core-electronics.com.au/guide...
What is the ESP32 and ESP8266 Guide - core-electronics.com.au/tutor...
Addressable LEDs with a Raspberry Pi - core-electronics.com.au/guide...
Pycom WiPy Overview (This is an ESP32 Board!) - core-electronics.com.au/tutor...
This is all about controlling Fully Addressable LED Lights using any Espressif ESP32 or ESP8266 Development Board and your mobile Phone all through WIFI! All possible by WLED Project. Now I have used Raspberry Pi full-sized computers to control fully addressable LED before (mainly because of previous lack of great software/knowledge to work with ESP32 Development Boards) but Raspberry Pi's are so much more than a simple addressable LED controller, they are full-on computers. So when it comes to a single addressable LED strip that you want to be good to go 24/7 but not necessarily be shining LED light everywhere all the time ESP32 are perfect for this application in regards to the much lower current draw (particularly when dormant), ease of power-cycling and significantly cheaper installation. Plus it will work with any NeoPixel or GlowBit Matrix. Replicating the patterns I create would be significantly harder to code from first principles than it is just to use this brilliant WLED App.
If you have any questions about this content or want to share a project you're working on head over to our maker forum, we are full time makers and here to help - coreelec.io/forum
Core Electronics is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:
Heaps of ESP32 and ESP8266 Boards (Any Will Work): core-electronics.com.au/brand...
ESP32 Thing Plus C (Used Here): core-electronics.com.au/catal...
WS2812 RGB Strip LEDs (Used Here): core-electronics.com.au/catal...
GlowBit 8x8 Module (Used Here): core-electronics.com.au/catal...
0:00 Intro
0:16 What Dev Board to Use
0:38 App Download Locations
0:44 Hardware You Need
1:29 Installation Process
2:20 Providing WIFI Details
2:37 Connecting Board to the WLED App
3:22 WLED App First Steps
3:55 Connecting LED Strip to Board
4:25 Not Getting Light? Do This
4:46 Success!
4:58 Exploring the WLED App
6:35 Creating a Custom Light Show
7:00 GlowBit Module Control
7:26 Outro
The following trademarks are owned by Core Electronics Pty Ltd:
"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo

Пікірлер: 540

@GermainStaquet 2 жыл бұрын

Note that WLED hosts its own web server on the chip itself, so the app is not even required. Just a web browser is enough.

@Core-Electronics 2 жыл бұрын

Pinned - Excellent addition, cheers mate 😊

@bogusbyte 2 жыл бұрын

Was just about to say the same :) That it have a webserver running on each wled device :)

@reiddennison Жыл бұрын

I've had trouble with the ios app, so I like this idea. Question: should I disconnect the power leads from my power supply to the ESP32 while it is connected to my laptop? Or can use the web browser for control on my laptop through wifi?

@relentlesswrestlingns 10 ай бұрын

can u please elaborate on how to use the app on the web browser side of things

@axriticmusic3473 6 ай бұрын

Website doesn't working,, help me out

@JustPlainRob Жыл бұрын

YO. I just wanted to say an incredibly huge THANK YOU. I've never heard of this until now and it just saved me *literal hours* of coding my own button controller page and patterns for a project. The app is solid (but crashes when I try to autodiscover the LED boards - no worries, the manual add works fine) and the firmware it puts on the board is basically perfect. I will never not be impressed with how fantastic of a web server you can run on an $8 uController board.

@Core-Electronics Жыл бұрын

Yay 😊 cheers for your kind words. No good about those crashes when you are setting it up but very glad I saved you time. These little WiFi ESP32 boards are proper remarkable.

@cac2244 2 жыл бұрын

I spent 8 hours trying to get ESP32 working via Arduino IDE and Blynk (POS) and never lit up and just got working thanks to your video and WLED

@filipgugo5296 2 жыл бұрын

Yup, spent a week last year trying to get my project up and running using blynk and eventually gave up

@Sabotage_Labs Жыл бұрын

That's awesome. Yea... I was gonna use LEDs and controlling them as a project to help learn Python. But, I found this and was just too easy. It's solid software!

@dericklong6191 Жыл бұрын

I got mine working in like 15 min.

@CalmingAnxiety Жыл бұрын

Awesome, Just what I needed to see. I have been trying to build a prototype for my first physical product and I think you have just given me the final piece of the puzzle.

@Core-Electronics Жыл бұрын

I love hearing this 😊 if your interested in sharing you should consider posting your prototype to our products page - core-electronics.com.au/projects/!

@erikr.johansen3992 Жыл бұрын

You are an absolute NATURAL at this, the dictation, the dedication and last but not least Your positive nature, give the vewers the urge to follow You in Your experiments...

@Core-Electronics Жыл бұрын

Thank you hugely mate 😊 very kind words!

@diogoalmeida9171 Жыл бұрын

Everything went well, very efficient, and very good control of the LEDs and everything else. I recommend many to use

@garynicholas4334 Жыл бұрын

You are a GOD! Ive been trying to get power to my LED strip for around 13 hours now. "CHANGE THE DATA PIN TO NUMBER 4". Thank you so much for your troubleshooting advice. If only I watched your video earlier. Awesome!!

@maurocamacho138 Жыл бұрын

I was trying to make like 30 effects without knowing how to code and i was having a hard time doing it. You saved me from spending who knows how many hours trying to do that. THANK YOU.

@Core-Electronics Жыл бұрын

It is proper liberating hey 😍 happy to help!

@MegaBlox_YT 2 ай бұрын

Thanks for the tour guys! I got to see this set in person and how everything it packed and shipped and created thanks so much ⭐️

@coltonbrunson772 Жыл бұрын

Thanks bro. Been doing months of research on LEDs. This helped tie up a few loose ends in my brain!

@Core-Electronics Жыл бұрын

Happy to help g 😊

@carlknowles2793 2 жыл бұрын

This was a great video. Installed app and software and had working in minutes. This is good cos I no longer have to go outside to turn of my lights.

@Core-Electronics 2 жыл бұрын

Thank you and sweet! Love hearing a good success story that increases overall coziness 😊

@borisbadinov7757 Жыл бұрын

Thanks so much for this. I was able to get going in minutes with great results. Subscribed!

@Core-Electronics Жыл бұрын

Yeeeeehaww! 😊

@whatsupwithsteve Жыл бұрын

Oh man I can't wait to start experimenting with this!!! Thanks for the great video and you can bet I'll be back with plenty of questions..:)

@ralphm6901 Жыл бұрын

I followed some instructions to make an Infinity Cube using LED strips and one of these controllers. It's currently programmed to run one of the multi-color patterns during the day, then a different pattern with dim red LEDs from 11pm-8am. It's a decoration during the day and a nightlight overnight.

@Core-Electronics Жыл бұрын

Consider adding your project to our Project Page 😊 - core-electronics.com.au/projects/. Your system sounds phenomenal cool and and it helps/inspires the community (+ there is Store Credit up for grabs!).

@Musicman-50 Жыл бұрын

Thank you so much for this great tutorial. You are very gifted at what you're doing here. I hope you will make more of these types of tutorials. 👍😎

@xdingxyb7926 Жыл бұрын

THANK YOU..for the life of me couldnt figure out why the LEDs wasnt turning on, and your suggestion to check the GPIO output saved me a headache. thank ya thank ya.

@MegaBlox_YT Ай бұрын

I would love to customise my room with leds this is definitely the way to go 🔥

@dassvijayankumar1776 Жыл бұрын

Your videos really inspires me and I liked it very much. Thank you very much.

@shway94 Жыл бұрын

THANK YOU YOU ARE A LIFESAVER!!!! I was having so much trouble trying to figure out how to get my lights to turn on and I realized I didn't have my GPIO set to the right number haha

@Core-Electronics Жыл бұрын

Haha Yaya! So glad to of helped 😍

@michaelboyko1602 Жыл бұрын

Thank you so much🙏🏻 I was about to send the light strip back to Amazon until I found your video. All good now. Cheers!

@Core-Electronics Жыл бұрын

Awww Yeeeehaw! 😊 Share with your friends and subscribe champ.

@user-hv2tg3ii8m 8 ай бұрын

Your videos inspire me a lot and are very useful

@alexandru-ionelmunteanu3777 5 ай бұрын

Thank you so much !!!! for finding this you made my life so much easier with this.

@Zeetheepanda 11 ай бұрын

I love your enthusiasm

@goviktor 9 ай бұрын

Thank you for the video. Useful and informative

@DaftRebel 2 ай бұрын

God bless you and WLED team

@rmac8706 Жыл бұрын

Great Video! I stumbled upon it while searching for something else! I am in the processes of finish a MK85 Iron Man suit and needed the ability to change light sequences. I happened to have a ESP8266 board laying around! I am having some issues with getting it to install on the board, but i am not giving up yet. Thanks again for a great video!

@Core-Electronics Жыл бұрын

Absolutely a killer application 😊 WLED allows you to sync multiple ESP32/ESP8622 boards together and run LED patterns synchronously, so you could have multiple sections to your Iron Man Suit without having a wire madness connecting everything together. I would love to see that project come to fruition, come write it up on our projects if you have time 😊 ! - core-electronics.com.au/projects/

@Sabotage_Labs Жыл бұрын

What type of ESP 8266 do you have? I've been using the D1 Mini clones from Amazon and they work great. Only have had to use a ESP32 for the sound reactive build of WLED. Just a simple 16x16 LED matrix and mic module. Just wanted to see it work lol. When you say you're having a problem (if still are)... what is the actual problem? I've had some in the past where I had like micropython flashed on the board and can't kill the scripts that autostart in them in like Thoney. I ended up just reflashing then with Arduino ID and made sure there were no other files on the board. Then...it flashed fine with LED. Arduino seemed to be the only one that could get it done. Idk...probably just me lol. For like $15 you can get 5 D1 mini boards from Amazon and be done with it...lol. I got these as my last batch and they've been working just fine. After you get your suit working...you may need some more for the next project lol. You'll love WLED that much!!!! Good luck man. ACEIRMC ESP8266 ESP-12 ESP-12F NodeMcu Mini D1 Module WeMos Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino,Compatible with WeMos D1 Mini (5pcs) a.co/d/aqOQr8Q

@krystil_king_fpv8275 5 ай бұрын

Thank you this helped me out so much it took me a while to figure it out since i had a 12v led strip and the esp32 takes 5 v but i figured it out with your video i had to connect to pin 5 which is GPIO 4. COULDNT OF DONE IT WITHOUT your VIDEO. THANKSSSSSSSSSSSSSSSSSSSSSSS!!!!!!!!!!!!!!!!!!!

@sirdrakey Жыл бұрын

Oh this is what I've been looking for!

@Core-Electronics Жыл бұрын

Yeeew 😊!

@atlantikus77 Жыл бұрын

This is soo cool. I built one with white PWM controlled LED.

@judasblewit Жыл бұрын

Great tutorial!

@ChristianSchebitz 9 ай бұрын

Best video onthis topic, thx! How can I blend in slowly LEDs, segment after segment by, clicking on a preset? And how to I sync two ESP to this functionality identical?

@MrBobWareham Жыл бұрын

Thanks for the video, very interesting and helpful

@Core-Electronics Жыл бұрын

All good 😊

@ZwiftyZwifter 2 жыл бұрын

This is so cool. Thanks so much.

@Core-Electronics 2 жыл бұрын

You are so welcome!

@mebinmathai7546 Жыл бұрын

awesome thank you

@user-sf8fk2sf5c Жыл бұрын

Amazing! I remember the work it took using libraries in the arduino IDE, When you install WLED on the ESP are you still able to connect and edit the code running on the ESP? For instance adding a mesh library and subsequent code.

@sensorchannel 4 ай бұрын

very nice!!

@yokaijoey9672 11 ай бұрын

Awesome video! I'm pretty stupid but would I be able to add a switch to this and a battery option? Want this for a cosplay 😬

@altanbjk1903 Жыл бұрын

Thank you for this video... How many different module can be connect this program

@barie1 Жыл бұрын

Awesome video. Thank you so much. I followed the instructions to create few presets on LED strips. It working BUT when I am disconnecting the ESP and connect again I dont see my presets... What do I need to do in order to save the segments and presets?

@FabrizioSanto Жыл бұрын

Hi, thanks for explaining in an easy way. I have a problem. my led strips have 4 wires instead of three (1 positive. 3 negative). How should I connect it to the circuit?

@mobobo218 2 ай бұрын

Would it possible to use a 3.5mm jack breakout board instead of a microphone for music? Also your tutorial was great. Helped getting the basics up and going.

@youtubeurevil Жыл бұрын

you got me going just ordered 3 matrix boards 200 wat power supply and 2 esp32 sorry i bought that here in Europe (from oz is just to much hassle for me )I`m going to have so much fun !!! thanks

@Core-Electronics Жыл бұрын

Enjoy!

@youtubeurevil Жыл бұрын

@@Core-Electronics Hi got my gear in and I was wondering have you guys got some wled specific forum where I can ask some questions ? Like how to supply power to heavy duty 4x 75 watt matrix ? does daisy chaining the matrices work ? etc etc Or do you have some downloadable exemplory wiring layout ? too many questions !!!! thanks in advance for making an old long time ago naval electrician man happy!

@Core-Electronics Жыл бұрын

Golly That Matrix Sounds Epic! 😊 Here is the official WLED Forum - wled.discourse.group/ & here is our Core Forum - forum.core-electronics.com.au/ Feel free to ask in either of them, you'll get fantastic advice from both. And as a side note when you do have your project up and running consider doing a project write up because I'd love to see what you come up with ($200 store credit potential too!) - core-electronics.com.au/projects/

@sm4rsch 11 ай бұрын

Before I hit that "checkout"-button for buying the esp-board, I hit that subscribe button.thank you

@blkthnk7635 Жыл бұрын

Awesome video. You inspired me to do my first maker strip. Some feedback- you should show the step of assigning the GPIO in the app so others with slightly different ESP boards understand it’s not completely plug and play!

@Core-Electronics Жыл бұрын

Cheers for the feedback! It is always welcome 😊. And your right, I loosely attempted to address it at 4.40.

@randomhunter47 7 ай бұрын

Love how you take the time to address and reply to as many comments as possible@@Core-Electronics

@scott80 Жыл бұрын

thanks for the video

@Core-Electronics Жыл бұрын

Thanks for the comment 😊!

@MegaBlox_YT Ай бұрын

Can you please make a video on power injection for this type of led strip? Also great video🔥

@FelixOnn1 2 жыл бұрын

Hey, really nice vídeo! I'm actually ordering an ESP32 to try it on my PC, controlling my ARGB fans. So, what I want to ask is just two things, sorry if I didn't understand correctky from the video: - Can I actually adapt the USB that connects in the ESP and have to other end to have a male SATA connection (5v input) and conect it directly to my PSU? - Since I will have tons of LEDs to light (I believe 500+), it's correct to connect the three cables to an HUB powered with SATA and then connect my ARG fans to it? Many thanks in advance

@sethswheelhouse Жыл бұрын

What do you do for strips of greater lengths where the current that can be delivered by the esp is a limiting factor or the required input voltage to the strip is 12v? Do I step down source voltage to the esp board to 3.3v, and run 12v to the LEDs, connecting the data pin to the esp still? Do I have to worry about bleed back into the esp, using a diode to ensure the pin is not at risk to be shorted?

@headend5 9 ай бұрын

Great tutorial. Awsome. Question: How do you get the ESP32 to automatically come back to the last lighting sequence set on the app after a reboot, like having a memory function? Can that be done? Or will I have to go to my phone app every time I power down and power up. Thanks.

@johankarlsson7484 Жыл бұрын

What powersupply do you use for the led strip?

@nelomedia805 8 ай бұрын

Hello! Thank you for the video! Is it possible to use the application from a phone to an esp32 using a local area network or even better Bluetooth with a ble board? Thanks!

@ChrisHalden007 Жыл бұрын

Great video. Thanks

@Core-Electronics Жыл бұрын

Cheers mate 😊

@MaxGarbaty Жыл бұрын

Thank you so much. I was scouring the internet trying to figure out why my LEDs wouldn't light up. I was using pin 4, as instructed by another video, and the default pin was set to 16. I changed the number and they all lit up 😁

@Core-Electronics Жыл бұрын

Very very very happy to hear! 😍

@ElvinAsadov. Жыл бұрын

thanks

@bobpaugh6725 2 жыл бұрын

Thank you for that great video. I was wondering can you control the led with music or have them flash to the beat of a song with the wled app?

@Core-Electronics 2 жыл бұрын

You absolutely can, there is now a Sound Reactive branch of the WLED Project letting you do just this! Just choose that when your installing the software to your ESP32 by clicking on the drop down menu below the install button. Definitely hit that up 😃

@rajivdear 9 ай бұрын

Thanks nice video

@KnutMenschenfreund 11 ай бұрын

Great Project! Is it possible to add a DMX interface? This would make the project even more valueable and made it a great option for professional stage technicians. I am looking for a solution that can be controlled from a DMX software in order to program a sount+light show!

@jnbridgess Жыл бұрын

This is awesome how many of these S2812 RGB Strip LEDs can you run off one esp32 board?

@eross21 10 ай бұрын

this is very cool. is there a way to transmit from phone or computer without wii fii , to maybe rf frequency? i want to use this in a live show outdoors, and the performers holding the leds will be about 50 meters away.

@XtianApi 9 ай бұрын

So if you needed to supplement power to the LED strip, what would you do? Do you need to share a ground between the power and the controller?

@BLuNTEDR 3 ай бұрын

Awesome guide, thanks bro from 2024

@Sulli00700 Жыл бұрын

Question: I'm looking to use this with an outdoor setup and the LED strip I want to use runs on 12V. Would I run the positive line to a 12V battery, and use a buck converter to drop the board's power to it's needed voltage, then connect all of the commons?

@FelixOnn1 8 ай бұрын

Hey, nice tutorial! Please, help me: can I use an ESP32-WROOM-32?

@madrush35 8 ай бұрын

I’m curious I’m looking at doing this but with a 12 v strip what esp controller would I use for it if possible

@-djs Жыл бұрын

Thank you so much for this tutorial. I'm learning the process, I recently purchased 3 WLED pre flashed controllers from Athom, only one is working, so I want to go down the route I should of in the first place, so my question is: Is there a preferred (better) WiFi board I should use?

@Core-Electronics Жыл бұрын

Most important is to get the right ESP32 or ESP8266 IC on the board (and not an ESP32-C3 or similar as these are new boards and the WLED software hasn't caught up). Apart from that so long as you have enough Pins out you will be smooth sailing. Check this guide here - core-electronics.com.au/guides/wireless/esp-32-naming-conventions/

@moel352 11 ай бұрын

Hey its AWESOME.... and now im still trying it, but why my wled on my phone didnt found the light? still "Found no light" thanks

@thedjnute Жыл бұрын

Is there a limitation as to the length between the LED and the ESP board?

@wolf_ifritah 2 жыл бұрын

This is fundamentally what I needed to see today - the solution to so many problems I’ve been having syncing multiple leds - ( omg!) I honestly can’t wait to get my hands on this little board and experiment… but I have one question …. You mention early in your vid the option of delivering more 5v power to leds .. this is a fundamental thing I need to learn …is there a wiring diagram I can look at to try grasp how that would function? It would be super useful to be able to calculate how many leds can I power off ( battery a ) then where I need to inject power - also maybe some tips for when LEDS go wrong ..thankyou so much - stay toasty

@Core-Electronics 2 жыл бұрын

Hey mate, we have some great guides on how to deliver more current to your Addressable LEDs whilst safely powering a Micro-Controller via External power supplies. It is all about making sure that the system shares a common ground and that the ESP32 board is insulated from current peaks (via the logic level converter). Give these guides a look for an understanding on this - core-electronics.com.au/tutorials/ws2812-addressable-leds-particle-quickstart-guide.html and core-electronics.com.au/tutorials/WS2812_and_NeoPixel_with_Pycom.html There are always more than one way to do anything and I'd like to in the future create a definitive guide on powering Addressable LEDS with an external power-supply and specifically the ESP32 boards. Also I'd like to throw in Sound Reactivity to that guide as well for good measure 😊.

@ConfusedNDazed 2 жыл бұрын

Please do a multi led strip with sound reactivity. Would love to build something like this with 8 strips.

@joseperez1551 Жыл бұрын

Can you do this with the TM1814?

@user-ku5ms2ui2q 9 ай бұрын

Hi, Can i use WS2812B strips for this set up?

@prakashsapkota3820 11 ай бұрын

Thank you so much for this making video. I try to find the code couldn't find how do i get the coding for ESP32 please can you help me.

@pacgrafica4 Жыл бұрын

Good afternoon, congratulations for your videos, they are fabulous. I have a doubt and if you can clarify I would be grateful. I need to put WRGB leds in a case letter. I was thinking of using the ESP32. Once configured and programmed, the ESP32 can work Offline to make a certain sequence of colors and effects, it turns on (ON with a switch ) and the ESP32 starts working and carrying out the predefined routine. Or is there another better controller for this situation. Thanks

@Core-Electronics Жыл бұрын

Thank you very kindly for your comment 😊, I must've missed it before my bad for taking too long to get to it. Your absolutely correct that once configured it will perform the same LED light show that it has been taught as soon as it turns on. You can definitely do a similar project with an Arduino UNO or a Raspberry Pi Pico at a similar price point, however the Graphical User Interface is just too brilliant in WLED to ignore. Here is all the compatible hardware, worth a check beforehand just to be sure you get the right LEDs for your project- kno.wled.ge/basics/compatible-hardware/

@maheshmanian 8 ай бұрын

Very interesting

@meguinness1116 8 ай бұрын

Hi...Can the board store the chosen colour combination and start it as soon the power is ON without tapping the power up button on the app? Thank you

@xbfo8053 10 ай бұрын

Is the usb only for power? I want to power a 24v led strip and a usb port on a pc only puts out 5v. Is the usb only for the setup or does it need to be connected constantly? Thanks!

@Mr31Vince Жыл бұрын

I use fastled arduino on my ESP32 to drive several hundred pixels on 25 meters of led strip. Use ws2815 strip as its 12v not 5v and therefore much less power injection required. Also the Ws2815 strip has a backup data line so one led failur doesent take out the rest of the strip. The ESP 32 can also be uploaded with new firmware using OTA (over the air) updates so after the first time you never need to connect it back to the laptop or PC again.

@Core-Electronics Жыл бұрын

Sounds like a very formidable set up 😊

@Taner-Aydın Жыл бұрын

Bu detay için teşekkür ederiz. WS 2815 IC şerit led uygulaması, video vb. hakkında detaylı bilgi. Var mı? WS2815 için hangi kontrol modülünü kullanmalıyız?

@Core-Electronics Жыл бұрын

Nice to hear a Turk, Data line for WS2815 are 5V and my understanding is they wont work with 3.3V and its best practice to use a 3.3v to 5v level shifter

@Mr31Vince Жыл бұрын

@@Core-Electronics yes, 3.3v can sometimes work for short runs, but I use a level shifter on the data output pin of the ESP32 for all mine.

@Mr31Vince Жыл бұрын

@@Core-Electronics I also use a second hand HP server power supply off eBay to power the strips. Easy to hack to give 12v output at 80A and much more reliable than a cheap power supply. Power injection at the end of every 5m strip.

@plamentodorov788 9 ай бұрын

Thanks for the great review. I want to make a small home project with around 15 meters of led stripe (SK8612 rgbw). WLED it seems just for my needs. But my doubts starts here. Can someone explain, what is the difference between $40 QuinLED-Dig-Quad (that uses ESP32 controller) and the $10 ESP32 controller itself? What are the befits of using QuinLED-Dig-Quad? I'm asking because as I see in this clip it is possible to control the led stripes only with the bare ESP32 controller. I also wonder SK8612 rgbw- 5v or 12v? Thanks.

@EvertonconnorConnor 8 ай бұрын

can i intergrate this into projector headlights for vehicles?

@bartomiejorlon3196 Жыл бұрын

Is it possible to integrate light strip/esp with apple homekit?

@walterblanc9708 Жыл бұрын

Heh heh. Thankyou everything works as explained my only problem was the board is different to yours and so I actually connected my LED strip to Vin instead of Vusb which did not work obviously. Now to attach a lot more!

@Core-Electronics Жыл бұрын

More Power More Better! (Be safe out there though!)

@zachsheram1214 Жыл бұрын

Hey awesome video! This makes me optimistic about figuring this out! I am currently building a wooden partition which will have ten to twenty 3.2m Long LED strips (144 pixels each). I saw that the max recommended LEDs wor WLED is 750, so I was wondering if you had a recommendation for controlling these strips and if similar boards would work? thanks for any help!

@Core-Electronics Жыл бұрын

WLED supports up to 1500 individual LEDs so I would be tempted to utilise it still. Two (or more) ESP32 boards could manage all your channels. Maybe your interested in using a Raspberry Pi to do this, check here for that - core-electronics.com.au/guides/raspberry-pi/fully-addressable-rgb-raspberry-pi/ If you are interested in powering a huge amount of LED Strips please note that there are some great standard practices to follow that you can find here - learn.adafruit.com/1500-neopixel-led-curtain-with-raspberry-pi-fadecandy/power-topology

@Sabotage_Labs Жыл бұрын

@@Core-Electronics good advice! WLED is Scalable... I guess you could say....right? I absolutely love the app. One of the best open-source apps when it comes to being user friendly and not to hard for newbies to understand.

@TheWolfmansgotnards 11 ай бұрын

Thankyou for this. I have a project this might be perfect for... I want to use it for prop lighting multiple props in a show. (a puppet show as it happens so distance isn't an issue) I'm guessing you just need a WIFI network, not actual internet connectivity or does the WLED app require to connect to the internet? Im assuming not but you never know! My idea is to have a playlist of effects to multiple ESP32s... even using it for somehthing as simple as a wifi switch to turn on an off at points in the show.... Is this reasonable given your experience of the board? Again thankyou!

@coltonmusselman2495 6 ай бұрын

Is this app compatible with the iOS shortcuts app?

@essaead9958 3 ай бұрын

Is it possible to run 30 meters of 12 v addressable led strips using this as the data supply? And the power supply from other source?

@eross21 9 ай бұрын

so is there a way to design an led pattern, and save it to the board. and then trigger it later when it’s not connected to the phone?

@WillMonotoneOfficial Жыл бұрын

Is there a central diagram for which pin connects to what? I have a esp32 wroom 32D and can’t seem to figure out what wire goes to what pin

@gamaximilian Жыл бұрын

Is there any start effect that allows to turn on LEDs starting from buttom to top and when all LEDs are ON it stay ON?

@drewnoakes 10 ай бұрын

Great video, thanks! Is it possible to connect these addressable strings in parallel, as you can with non-addressable RGBW led strips?

@drewnoakes 10 ай бұрын

I think I found an answer to this. You can run the power in parallel, but not the data. It seems like each LED's address is really its distance from the controller, and each LED passes the message down the line, likely decrementing some counter such that when a unit receives a command with a zero count, it knows that data is for itself, but for counts higher than zero it passes the command after decrementing the count. With this design, running strips in parallel would mean each strip would be a mirror of each other strip. i.e. if you have two strips and send a command to the LED with ID 3, the fourth LED in both strips would respond. Does that match your understanding?

@scar_gamer7637 8 ай бұрын

Is it funktional with any neopixel?

@nothingimpossible6565 10 ай бұрын

can connect this to homekit ?

@HansKlossJ23 Жыл бұрын

Great and well explained content. Concerning ESP32 how many strips of ws2812b 5m 300led one board can support? Of course to keep very good frame/sec ratio.

@Core-Electronics Жыл бұрын

The Max you can run is between ~500 to 600 LEDs per channel which will keep the frame rate above the default frame rate of 42 within WLED. Check for more information regarding multi strip lighting right here - kno.wled.ge/features/multi-strip/

@HansKlossJ23 Жыл бұрын

@@Core-Electronics Thank you very much that’s exactly what I was looking for.Back to testing and hopefully I will finish before the winter really starts.

@ericcraig9943 Жыл бұрын

Trying to lite-Up the whole light Strip WS2812B...

@Guilevic Жыл бұрын

does wled work with alexa or google assistant? thanks for the enlightening video

@Core-Electronics Жыл бұрын

Absolutely! Here is a great Instructables to run through in regards to setting up WLED with Google Assistant - www.instructables.com/WLED-on-ESP8266-IFTTT-Google-Assistant/

@tonylee-delisle7954 Жыл бұрын

Hi, Can you tell me if the app will connect to the ESP board over wifi directly or do they both need t be connected to a wifi network? I am asking because I would like to create a project where the lights can be included into a portable project which will work anywhere

@satman6124 5 ай бұрын

Hi is there anyway to interface this to virtual pinball

@ianbertenshaw4350 2 жыл бұрын

Cool👍

@user-ic9tg9de5w Жыл бұрын

You connected 64 LEDs to boards power supply. Is it able to provide such power or you have to use separate power supply?

@user-oy9qo4sq7w Жыл бұрын

Hi. A very interesting project. What platform did you use to create the android application?

@Core-Electronics Жыл бұрын

WLED is mainily C++, C, HTML and some Javascript CSS and Python. Come check out the Open Source Scripts here - github.com/Aircoookie/WLED Huge props goes to the WLED Team!

@giannisoulorgias5905 8 ай бұрын

Hello, i do have a question. How many segments you can put on an LED strip ? @core Electronics

@Animatedron Жыл бұрын

Awesome video! I was wondering if this would work for creating a light up bouldering wall? So for example I'd have a bouldering wall with say 15 x 15 holds, and I would like to have an LED situated underneath each hold and the ability to light up which hold I can use? Hopefully that make sense. I would assume I'd have to use individual LED as opposed to strips or that grid, but could I somehow wire them all together to still work as "segments"? Appreciate any help.

@Core-Electronics Жыл бұрын

You could totally wire up multiple single nodes together and get your desired effect on your Bouldering wall 😊 seems like a great way to approach this and still have a fully addressable RGB effect. You can cut up a strip and wire each node with an appropriate length of wire between each (so that they are located where your Climbing Holds go) or we do have single node WS2812B LEDs here - core-electronics.com.au/catalog/product/view/sku/BOB-13282

@Core-Electronics Жыл бұрын

Once the hardware is set up the WLED app is a perfect way to create Routes by lighting up different sections of LEDs. You'll have a Maker Moon Board by the end of it all 😊

@Animatedron Жыл бұрын

@@Core-Electronics Amazing! Thank you very much for the response!