Nice install Jack. Consider using Video Balun & Power Audio transmission over CAT5 CCTV. Few reasons Use cat 5 or 6 cable and terminate with normal RJ45 plugs. Then you can use a simple or advanced tester for cables faults. Also means that a day of tomorrow if they want to change to Ip camera you just change the camera. Cat 5/6/7 cable have an indoor verion and outdoor version. Outdoors is UV rated. When changing to IP camera using PoE switch (Power Over Ethernet) you will do away with the Power supply for the camera units. A point to note Balun are not water proof so keep them inside. Keep up the great work Jack.

Jack no need to wire from router to DVR we do thousand of camera installs & use TP link powerline adapter kits mate work perfectly - just plug & play

The reason the old cameras are at that height is so they can't easily be reached, while still being able to produce a decent quality image (so you can recognise faces etc). If you put hem up at soffit level, you may have trouble with the detail (especially at night). Best to test with holding one up at that level (top of a ladder) with a temp cat5 cable and get the customer to check they are happy with image quality. PS. A digital camera system would offer much better resolution than the analogue one you've installed, as well as allowing the system to be easily expanded later. The small 'L' shape is for the data, the big one is power. 😄 Make sure the hard-drive you get is rated for CCTV use too! POS = Point Of Sale IoT = Internet of Things.

POS is Point of Sale that will be used in a shop to watch a till, so they can keep a check on what was rung in to keep an eye on staff IOT is Internet of Things - to link with smart home stuff nice

Nice job youngster

Very nice video. Too bad it will probably get demonetized for having Jack's bum crack on show. 🤣🤣🤣

Hey man brilliant video as always. Would recommend using a POE NVR means means the network cable is already powered save making off all they ends. Few things you were unsure about In the Setting POS - point of sale, shops can have overlay of what is being scanned in to till. IOT Internet of things basically smart features to send a signal to a smart hub then there turn on lights or sound alarm ect

Another informative one mate, cracking video as per! Nice cameras as well then, never heard of them but would certainly look at them for my next install! Big up ya self!

Another great video from the master top job 👍👍

I've done the same my dvr is in my loft and I've ran a cat7 as well and I've got a eathnet switch and a hdmi switch so I can see the camera on all my tvs running hdmi

Jolly good job jack 👍👍

Keep it up mate 👍

A great video. You can get rj45 to BNC and ac or DC adapters. They are quicker and protect the solid cores from breaking or taking in water so easy. If I was you POE cameras are so much quicker and can be just as cheap to buy.

Noice. Unifi Protect is pricey, but the software is a dream to used compared to the Chinese stuff. Hardware is mint too. Can be an option if customer willing to spend a few more sheckels.

Big up❤

Interesting video like the way you run power with the cat 5 could you put a link for the equipment used ? 👍

Just looked them up they are almost half the price of the hikvision that we use. I’ll give them a go and see how they are 👍

Not a lot of insulation in the loft, mine has 250mm and the recent heatwave cooked the circuit board on the DVR as loft space got to well over 60 degrees. Had to re wire it all and move the replacement DVR out of loft.

POS will allow it to be connected to a till "POS meaning Point of sale". Its for retailers to ensure tills are not used as personal banks by staff :-)

Noiicee

Top tip about CCA cat5 cable.. The stuff is terrible, does not transmit data as good as proper cat5 and just not worth the risk to save a couple of quid.

you should ask about IP camera with poe perfect upgrade

Blue lead is sata data cable.. Molly connector is power 12v and 5v

NOOOOIICCCCEEE! 🙂

First