How to EASY Pull Out Speaker Dust Cap in HOME DIY

Рет қаралды 116,979

Күн бұрын

How to EASY fix, repair and pull out damaged dented speaker dust cap in HOME DIY. Most people who use speakers will eventually end up in a real pickle of a scenario where the speaker dust cap gets dented. Fear not, today we'll be going over on how you can easily avert this crisis. It can probably be fixed by one of the three methods we'll be covering in this video. You can replicate these methods depending on what tools you have on standby. A needle or a syrringe, gorilla or ducttape or basically anything thats sticky enough or just a regular vaccuum cleaner, preferably one that has a removable tip. Though, like mentioned before, we recommend you use a speaker grill instead of applying these techniques.
Bluetooth AptX Receiver on Aliexpress:
- s.click.aliexpress.com/e/_Ddt...
Bigger Logitech Z906 speakers on Amazon:
US amzn.to/3KkPD7L
UK amzn.to/3EkkQE9
DE amzn.to/3KmBPcW
Newer Logitech Z623 speakers on Amazon:
US amzn.to/2DF7L8R
UK amzn.to/383wKRi
DE amzn.to/2RfP43r
Bluetooth Receiver on Amazon:
- US amzn.to/3XJc4X6
- UK amzn.to/3YHtsgx
- DE amzn.to/3Eg7xok
affiliate links
Thanks for watching, leave a comment on whether or not you would leave it as is or try fixing and smash the piss out of that subscribe button.
🇷🇺 Hазвание видео: как ЛЕГКО выровнять колпак на динамике - Сделай сам
----------------SOCIAL----------------
✔️ / techlv
✔️ / techscrews
----------Video playlists-------------
▶️ Speakers music sound & bass test • Speakers sound & bass ...
▶️ Teardown - Look inside - What's Inside? • Speaker Teardown: Look...
▶️ Do It Yourself video guides • Do It Yourself DIY vid...
▶️ Unboxing, review and first look • Unboxing, Review & Tests
0:00 Pull Out Damaged Speaker Dust Cap in HOME
0:39 1st Method - vaccuum cleaner
1:39 2nd Method - syringe with needle
2:00 3rd Method - gorilla or ducttape .
DISCLAIMER: This video description and comment section contains affiliate links, which means that if you click on one of the product links and later buy the product, I’ll receive a small commission. This NEVER affects the price you pay, and it’s an easy way to support the channel and the work that I do. This helps support the channel and allows me to continue to make videos like this.
Thank you for the support!

Пікірлер: 73

@Techscrews Жыл бұрын

Bluetooth AptX Receiver on Aliexpress: - s.click.aliexpress.com/e/_Ddt5Aql Bigger Logitech Z906 speakers on Amazon: US amzn.to/3KkPD7L UK amzn.to/3EkkQE9 DE amzn.to/3KmBPcW Newer Logitech Z623 speakers on Amazon: US amzn.to/2DF7L8R UK amzn.to/383wKRi DE amzn.to/2RfP43r Bluetooth Receiver on Amazon: - US amzn.to/3XJc4X6 - UK amzn.to/3YHtsgx - DE amzn.to/3Eg7xok affiliate links

@CyanideLovesong Жыл бұрын

OMG. My little girl pushed in the dust cap on one of my Avantone Mixcubes. Your vacuum cleaner trick pulled it back to normal and you can barely tell it ever happened. It's about 99% back to what it was visually, and in terms of sound -- it's perfect. Thank you for this video. I was so depressed when it happened because I can't really afford to replace it right now.

@Techscrews Жыл бұрын

thanks for so sweet feedback :) Good luck :)

@tiffanysotolongo8480 Жыл бұрын

I accidentally pushed in the dust cap on my subwoofer, and I tried the vacuum cleaner, hack and it worked! Thank you for saving my speaker looking ugly!

@OmegaMizik 2 жыл бұрын

Vacuum cleaner WORKED like A CHARM 🔥🔥🔥 Thank so much 👊🏽

@capth00k 2 жыл бұрын

Gaff tape works pretty good for pulling out the dust caps too.

@altops4490 2 жыл бұрын

for poly dust caps i recomend warming them up with hair dryer, before and after recovery.

@Techscrews 2 жыл бұрын

thanks for advice.

@DipicGamer 7 күн бұрын

i ended up gluing the side of a glue stick (used for glue guns) at the dust cap and pulled up ant it worked like a charm!

@tims8603 Жыл бұрын

I tried the vacuum cleaner trick and it wouldn't work. I thought that maybe if I got the dust cap wet, it might help. I got it damp with a sponge and tried the vacuum again. It popped right out!

@Techscrews Жыл бұрын

Thanks for idea 👍

@hoylandy 3 ай бұрын

Brilliant video. Thank you very much

@hoylandy 3 ай бұрын

Brilliant video, thanks !!

@waveatelliot970 2 жыл бұрын

Informative with a hilarious narrative :)

@Techscrews 2 жыл бұрын

Thanks a lot 🙂

@playerongaming 2 жыл бұрын

wow techniques are good

@AUTISTICLYCAN 8 ай бұрын

I have a Pioneer HPM 100 woofer coming to replace my broken one. Problem: the replacement woofers dust cap is a bit dented but is likely recoverable. I will try thin strips of tape and micro pressure to pull as many dimples out as I can. I don't care if it's NOT Absolutely perfect. I want it to be pretty at a glance. If someone stares at the dust cover though the cover mesh I don't care that they see my dimpled speaker cap. I have a pair of clear Lucite Promo Pioneer HPM-100 speakers in my living room with near perfect dust domes. I wont try the pin method unless my brother can find super thin surgical needles or pins. I was happy to hear you say a dented speaker dust cover does not affect sound quality.

@777musiqofficial6 2 жыл бұрын

Personally I take the speaker out and blow air hard through the air hole at the back. this method works for even dust caps that are very stiff

@PrinciplesMatter Жыл бұрын

Interesting idea. Using air from a compressor? If so what pressure did you find sufficient to the task?

@enlightenedmystery9019 2 ай бұрын

Nice. Would this work for aluminium cones? Let's say warm them up with a heat gun and then blow air into the air vent port.

@JCplays143 Ай бұрын

Thank you

@lordlollops1 3 ай бұрын

Tape ( heavy duty )worked a dream - thanks 👍🏻

@Techscrews 3 ай бұрын

Thanks for feedback.

@philipiano001 6 ай бұрын

With the puncture and pull method. Push in an L shaped wire. Work around the dent. No need to have multiple holes. Fill the legacy hole as shown. 🤓

@LibertyAndJusticeForAll Жыл бұрын

THANK YOU!!! Duct tape worked!!!

@silvertamman3218 2 жыл бұрын

I have used vacum cleaner with mixed results. Managed to fix mb-quart midrange driver dustcap, but sucked In whole diafragma of s30a tweeter.

@stugant220 2 ай бұрын

The vacuum technique works very well if spritzed with a little water.

@Dj.Harmony 4 ай бұрын

Do you have a tip for a smaller speaker bc my dust cap is from plastic and is very small

@Flow-Joe Жыл бұрын

I just tried method 2.5 and it worked for me. What is 2.5? I put multiple (5-6) layers of thin cut stripes of double sided tape, somewhat randomly, on the dust cap and poked with a needle into/between the layers of sticky tape and managed pull it out, without damaging anything. Worked better than expected. Thanks for the tipps.

@Techscrews Жыл бұрын

Excellent, thanks for feedback 💯

@bharathidhanapal3776 2 ай бұрын

I have easily rectified using vaccum cleaner

@brandonsanmartin7764 Жыл бұрын

use self adhesive non slip furniture pads it’s strong enough to pop it back up and no residue left.

@soni13vaijo 2 жыл бұрын

Personally, i prefer using the tape, it always success pulling the speaker's dust cap back.

@Random_4400 2 жыл бұрын

Usually i just use some strong tape it works great!

@Random_4400 2 жыл бұрын

Oh you too lol

@tomeczeq5369 2 жыл бұрын

@@Random_4400 what XD?

@TristanSpeno 2 жыл бұрын

did you just reply to yourself?

@PrinciplesMatter Жыл бұрын

@@TristanSpeno I think they were expanding on their original post when they got to where the creator used tape but I could be wrong. 🤔

@Random_4400 Жыл бұрын

@@TristanSpeno no i replied to a reply which i guess got deleted.

@PrinciplesMatter Жыл бұрын

I like painter's tape as it has no chance of leaving a residue behind. I need to wire them with a 9v pig fence line to keep little fingers away. 🤔😅

@LittleRichard1988 Жыл бұрын

If the speakers have their fronts on that does the best job at preventing the drivers from being damaged in the first place. If they do get dented you won't even notice if the fronts are on so I would personally leave it.

@mgm1411 Жыл бұрын

Auch! those injections hurt..

@benjimenfranklin7650 6 ай бұрын

All i can tell you is how i do it. I use masken tape. Put an end on the dust cap an GENTLY pull , it usually comes right out 😊.

@housingshame2601 Жыл бұрын

I used very tacky electrician tape and it worked straight away. vacuum cleaner didn't because the inlet was smaller than the dent surface area. thanks

@Techscrews Жыл бұрын

Thanks for feedback

@maartenyzer4121 2 жыл бұрын

The stomp point of a needle With some 10 sec. Glue

@OPEL0413 Жыл бұрын

oh those little things that you push in

@81Nightro 2 ай бұрын

dont used neddle use vacoum cleaner

@tomeczeq5369 2 жыл бұрын

Vaccum cleaner the best 🤣

@tiffanysotolongo8480 Жыл бұрын

Also, what if you completely pushed the dust cap? What do you do at that point?

@Techscrews Жыл бұрын

Forget about it, because it dont change sound.

@tiffanysotolongo8480 Жыл бұрын

@@TechscrewsI have a speaker that has a pushed in dust cup and it didn’t affect the sound but it did affect the look but I don’t really care about it anyway but it’s fine it’s been like that for like five months anyway

@philipiano001 6 ай бұрын

Dust caps can be removed and replaced with new. See Simply Speakers.